target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         memory {
  10                 device_type = "memory";
  11                 reg = <0x80000000 0x10000000>;
  12         };
  13
  14         soc {
  15                 rng@22000 {
  16                         status = "okay";
  17                 };
  18
  19                 mdio@90000 {
  20                         status = "okay";
  21                         pinctrl-0 = <&mdio_pins>;
  22                         pinctrl-names = "default";
  23
  24                         ethphy: ethernet-phy@5 {
  25                                 reg = <0x5>;
  26                         };
  27                 };
  28
  29                 counter@4a1000 {
  30                         compatible = "qcom,qca-gcnt";
  31                         reg = <0x4a1000 0x4>;
  32                 };
  33
  34                 ess_tcsr@1953000 {
  35                         compatible = "qcom,tcsr";
  36                         reg = <0x1953000 0x1000>;
  37                         qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
  38                 };
  39
  40                 tcsr@1949000 {
  41                         compatible = "qcom,tcsr";
  42                         reg = <0x1949000 0x100>;
  43                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  44                 };
  45
  46                 tcsr@1957000 {
  47                         compatible = "qcom,tcsr";
  48                         reg = <0x1957000 0x100>;
  49                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  50                 };
  51
  52                 crypto@8e3a000 {
  53                         status = "okay";
  54                 };
  55
  56                 watchdog@b017000 {
  57                         status = "okay";
  58                 };
  59
  60                 i2c_0: i2c@78b7000 {
  61                         pinctrl-0 = <&i2c_0_pins>;
  62                         pinctrl-names = "default";
  63                         status = "okay";
  64
  65                         tpm@29 {
  66                                 /* No Driver */
  67                                 compatible = "atmel,at97sc3203";
  68                                 reg = <0x29>;
  69                                 read-only;
  70                         };
  71                 };
  72         };
  73
  74         keys {
  75                 compatible = "gpio-keys";
  76
  77                 reset {
  78                         label = "Reset button";
  79                         gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
  80                         linux,code = <KEY_RESTART>;
  81                 };
  82         };
  83 };
  84
  85 &blsp_dma {
  86         status = "okay";
  87 };
  88
  89 &blsp1_uart1 {
  90         /* Texas Instruments CC2540T BLE radio */
  91         pinctrl-0 = <&serial_0_pins>;
  92         pinctrl-names = "default";
  93         status = "okay";
  94 };
  95
  96 &blsp1_uart2 {
  97         pinctrl-0 = <&serial_1_pins>;
  98         pinctrl-names = "default";
  99         status = "okay";
 100 };
 101
 102 &cryptobam {
 103         status = "okay";
 104 };
 105
 106 &qpic_bam {
 107         status = "okay";
 108 };
 109
 110 &tlmm {
 111         mdio_pins: mdio_pinmux {
 112                 mux_1 {
 113                         pins = "gpio6";
 114                         function = "mdio";
 115                         bias-pull-up;
 116                 };
 117                 mux_2 {
 118                         pins = "gpio7";
 119                         function = "mdc";
 120                         bias-pull-up;
 121                 };
 122         };
 123
 124         nand_pins: nand_pins {
 125                 pullups {
 126                         pins = "gpio53", "gpio58", "gpio59";
 127                         function = "qpic";
 128                         bias-pull-up;
 129                 };
 130
 131                 pulldowns {
 132                         pins = "gpio54", "gpio55", "gpio56",
 133                                 "gpio57", "gpio60", "gpio61",
 134                                 "gpio62", "gpio63", "gpio64",
 135                                 "gpio65", "gpio66", "gpio67",
 136                                 "gpio68", "gpio69";
 137                         function = "qpic";
 138                         bias-pull-down;
 139                 };
 140         };
 141
 142         spi_0_pins: spi_0_pinmux {
 143                 pin {
 144                         function = "blsp_spi0";
 145                         pins = "gpio13", "gpio14", "gpio15";
 146                         drive-strength = <12>;
 147                         bias-disable;
 148                 };
 149                 pin_cs {
 150                         function = "gpio";
 151                         pins = "gpio12";
 152                         drive-strength = <2>;
 153                         bias-disable;
 154                         output-high;
 155                 };
 156         };
 157
 158         i2c_0_pins: i2c_0_pinmux {
 159                 mux {
 160                         pins = "gpio10", "gpio11";
 161                         function = "blsp_i2c0";
 162                         drive-strength = <4>;
 163                         bias-disable;
 164                 };
 165         };
 166
 167         serial_0_pins: serial_0_pinmux {
 168                 mux {
 169                         pins = "gpio16", "gpio17";
 170                         function = "blsp_uart0";
 171                         bias-disable;
 172                 };
 173         };
 174
 175         serial_1_pins: serial_1_pinmux {
 176                 mux {
 177                         pins = "gpio8", "gpio9";
 178                         function = "blsp_uart1";
 179                         bias-disable;
 180                 };
 181         };
 182 };
 183
 184 &nand {
 185         pinctrl-0 = <&nand_pins>;
 186         pinctrl-names = "default";
 187         status = "okay";
 188
 189         nand@0 {
 190                 partitions {
 191                         compatible = "fixed-partitions";
 192                         #address-cells = <1>;
 193                         #size-cells = <1>;
 194
 195                         partition@0 {
 196                                 /* 'aos0' in Aruba firmware */
 197                                 label = "aos0";
 198                                 reg = <0x0 0x2000000>;
 199                                 read-only;
 200                         };
 201
 202                         partition@2000000 {
 203                                 /* 'aos1' in Aruba firmware */
 204                                 label = "ubi";
 205                                 reg = <0x2000000 0x2000000>;
 206                         };
 207
 208                         partition@4000000 {
 209                                 label = "aruba-ubifs";
 210                                 reg = <0x4000000 0x4000000>;
 211                                 read-only;
 212                         };
 213                 };
 214         };
 215 };
 216
 217 &gmac {
 218         status = "okay";
 219 };
 220
 221 &switch {
 222         status = "okay";
 223
 224         /delete-property/ psgmii-ethphy;
 225 };
 226
 227 &swport5 {
 228         status = "okay";
 229
 230         label = "lan";
 231         phy-handle = <&ethphy>;
 232         phy-mode = "rgmii-id";
 233 };
 234
 235 &ethphy0 {
 236         status = "disabled";
 237 };
 238
 239 &ethphy1 {
 240         status = "disabled";
 241 };
 242
 243 &ethphy2 {
 244         status = "disabled";
 245 };
 246
 247 &ethphy3 {
 248         status = "disabled";
 249 };
 250
 251 &ethphy4 {
 252         status = "disabled";
 253 };
 254
 255 &psgmiiphy {
 256         status = "disabled";
 257 };
 258
 259 &wifi0 {
 260         status = "okay";
 261         nvmem-cell-names = "pre-calibration", "mac-address";
 262         nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d 0>;
 263         qcom,ath10k-calibration-variant = "Aruba-AP-303";
 264 };
 265
 266 &wifi1 {
 267         status = "okay";
 268         nvmem-cell-names = "pre-calibration", "mac-address";
 269         nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d 1>;
 270         qcom,ath10k-calibration-variant = "Aruba-AP-303";
 271 };