target/linux/brcm2708/patches-4.14/950-0361-overlays-Fix-vc4-kms-kippah-7inch.patch

   1 From 38c886fdba43a119c7a28655e30c11fc77cdf814 Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.org>
   3 Date: Thu, 19 Jul 2018 13:07:39 +0100
   4 Subject: [PATCH 361/454] overlays: Fix vc4-kms-kippah-7inch
   5
   6 Add a Params: to the README entry and move it into alphabetical order.
   7
   8 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
   9 ---
  10  arch/arm/boot/dts/overlays/README | 13 +++++++------
  11  1 file changed, 7 insertions(+), 6 deletions(-)
  12
  13 --- a/arch/arm/boot/dts/overlays/README
  14 +++ b/arch/arm/boot/dts/overlays/README
  15 @@ -1965,6 +1965,13 @@ Params: cma-256                 CMA is 2
  16          cma-64                  CMA is 64MB
  17
  18
  19 +Name:   vc4-kms-kippah-7inch
  20 +Info:   Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
  21 +        Requires vc4-kms-v3d to be loaded.
  22 +Load:   dtoverlay=vc4-kms-kippah-7inch
  23 +Params: <None>
  24 +
  25 +
  26  Name:   vc4-kms-v3d
  27  Info:   Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or
  28          booting to GUI while this overlay is in use will cause interesting
  29 @@ -1977,12 +1984,6 @@ Params: cma-256                 CMA is 2
  30          cma-64                  CMA is 64MB
  31
  32
  33 -Name:   vc4-kms-kippah-7inch
  34 -Info:   Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
  35 -        Requires vc4-kms-v3d to be loaded.
  36 -Load:   dtoverlay=vc4-kms-kippah-7inch
  37 -
  38 -
  39  Name:   vga666
  40  Info:   Overlay for the Fen Logic VGA666 board
  41          This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds