target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "ar9132.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wr941-v2", "qca,ar9132";
  10         model = "TP-Link TL-WR941N/ND v2/v3";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29
  30                 qss {
  31                         label = "qss";
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  34                         debounce-interval = <60>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 led_system: system {
  42                         label = "green:system";
  43                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 qss_r {
  47                         label = "red:qss";
  48                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  49                 };
  50
  51                 qss_g {
  52                         label = "green:qss";
  53                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 wlan {
  57                         label = "green:wlan";
  58                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61         };
  62 };
  63
  64 &mdio0 {
  65         status = "okay";
  66
  67         switch@0 {
  68                 compatible = "marvell,mv88e6060";
  69                 reg = <0>;
  70
  71                 ports {
  72                         #address-cells = <1>;
  73                         #size-cells = <0>;
  74
  75                         port@0 {
  76                                 reg = <0>;
  77                                 label = "wan";
  78                         };
  79
  80                         port@1 {
  81                                 reg = <1>;
  82                                 label = "lan1";
  83                         };
  84
  85                         port@2 {
  86                                 reg = <2>;
  87                                 label = "lan2";
  88                         };
  89
  90                         port@3 {
  91                                 reg = <3>;
  92                                 label = "lan3";
  93                         };
  94
  95                         port@4 {
  96                                 reg = <4>;
  97                                 label = "lan4";
  98                         };
  99
 100                         port@5 {
 101                                 reg = <5>;
 102                                 ethernet = <&eth0>;
 103                         };
 104                 };
 105         };
 106 };
 107
 108 &spi {
 109         status = "okay";
 110
 111         flash@0 {
 112                 compatible = "jedec,spi-nor";
 113                 reg = <0>;
 114                 spi-max-frequency = <25000000>;
 115
 116                 partitions {
 117                         compatible = "fixed-partitions";
 118                         #address-cells = <1>;
 119                         #size-cells = <1>;
 120
 121                         uboot: partition@0 {
 122                                 label = "u-boot";
 123                                 reg = <0x000000 0x20000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@20000 {
 128                                 compatible = "tplink,firmware";
 129                                 label = "firmware";
 130                                 reg = <0x020000 0x3d0000>;
 131                         };
 132
 133                         art: partition@3f0000 {
 134                                 label = "art";
 135                                 reg = <0x3f0000 0x10000>;
 136                                 read-only;
 137                         };
 138                 };
 139         };
 140 };
 141
 142 &eth0 {
 143         status = "okay";
 144
 145         phy-mode = "rmii";
 146         nvmem-cells = <&macaddr_uboot_1fc00>;
 147         nvmem-cell-names = "mac-address";
 148
 149         fixed-link {
 150                 speed = <100>;
 151                 full-duplex;
 152         };
 153 };
 154
 155 &wmac {
 156         status = "okay";
 157         mtd-cal-data = <&art 0x1000>;
 158         nvmem-cells = <&macaddr_uboot_1fc00>;
 159         nvmem-cell-names = "mac-address";
 160 };
 161
 162 &uboot {
 163         compatible = "nvmem-cells";
 164         #address-cells = <1>;
 165         #size-cells = <1>;
 166
 167         macaddr_uboot_1fc00: macaddr@1fc00 {
 168                 reg = <0x1fc00 0x6>;
 169         };
 170 };