--- /dev/null
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <rpi_hw.h>
+
+#include <drivers/rpi3/mailbox/rpi3_mbox.h>
+
+#define RPI3_MAILBOX_MAX_RETRIES U(1000000)
+
+/*******************************************************************************
+ * Routine to send requests to the VideoCore using the mailboxes.
+ ******************************************************************************/
+void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size)
+{
+ uint32_t st, data;
+ uintptr_t resp_addr, addr;
+ unsigned int retries;
+
+ /* This is the location of the request buffer */
+ addr = (uintptr_t)req;
+
+ /* Make sure that the changes are seen by the VideoCore */
+ flush_dcache_range(addr, req_size);
+
+ /* Wait until the outbound mailbox is empty */
+ retries = 0U;
+
+ do {
+ st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET);
+
+ retries++;
+ if (retries == RPI3_MAILBOX_MAX_RETRIES) {
+ ERROR("rpi3: mbox: Send request timeout\n");
+ return;
+ }
+
+ } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U);
+
+ /* Send base address of this message to start request */
+ mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET,
+ RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr);
+
+ /* Wait until the inbound mailbox isn't empty */
+ retries = 0U;
+
+ do {
+ st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET);
+
+ retries++;
+ if (retries == RPI3_MAILBOX_MAX_RETRIES) {
+ ERROR("rpi3: mbox: Receive response timeout\n");
+ return;
+ }
+
+ } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U);
+
+ /* Get location and channel */
+ data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET);
+
+ if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) {
+ ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data);
+ panic();
+ }
+
+ resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK);
+ if (addr != resp_addr) {
+ ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data);
+ panic();
+ }
+
+ /* Make sure that the data seen by the CPU is up to date */
+ inv_dcache_range(addr, req_size);
+}
--- /dev/null
+/*
+ * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RPI3_MBOX_H
+#define RPI3_MBOX_H
+
+#include <stdint.h>
+
+/* This struct must be aligned to 16 bytes */
+typedef struct __packed __aligned(16) rpi3_mbox_request {
+ uint32_t size; /* Buffer size in bytes */
+ uint32_t code; /* Request/response code */
+ uint32_t tags[0];
+} rpi3_mbox_request_t;
+
+#define RPI3_MBOX_BUFFER_SIZE U(256)
+
+/* Constants to perform a request/check the status of a request. */
+#define RPI3_MBOX_PROCESS_REQUEST U(0x00000000)
+#define RPI3_MBOX_REQUEST_SUCCESSFUL U(0x80000000)
+#define RPI3_MBOX_REQUEST_ERROR U(0x80000001)
+
+/* Command constants */
+#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION U(0x00010002)
+#define RPI3_TAG_END U(0x00000000)
+
+#define RPI3_TAG_REQUEST U(0x00000000)
+#define RPI3_TAG_IS_RESPONSE U(0x80000000) /* Set if response */
+#define RPI3_TAG_RESPONSE_LENGTH_MASK U(0x7FFFFFFF)
+
+#define RPI3_CHANNEL_ARM_TO_VC U(0x8)
+#define RPI3_CHANNEL_MASK U(0xF)
+
+void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size);
+
+#endif
plat/rpi/rpi3/aarch64/plat_helpers.S \
plat/rpi/rpi3/rpi3_bl1_setup.c \
plat/rpi/rpi3/rpi3_io_storage.c \
- plat/rpi/rpi3/rpi3_mbox.c
+ drivers/rpi3/mailbox/rpi3_mbox.c \
+ plat/rpi/rpi3/rpi_mbox_board.c
BL2_SOURCES += common/desc_image_load.c \
drivers/io/io_fip.c \
+++ /dev/null
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-
-#include <platform_def.h>
-
-#include <arch_helpers.h>
-#include <common/debug.h>
-#include <lib/mmio.h>
-
-#include <rpi_hw.h>
-
-/* This struct must be aligned to 16 bytes */
-typedef struct __packed __aligned(16) rpi3_mbox_request {
- uint32_t size; /* Buffer size in bytes */
- uint32_t code; /* Request/response code */
- uint32_t tags[0];
-} rpi3_mbox_request_t;
-
-#define RPI3_MBOX_BUFFER_SIZE U(256)
-static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE];
-
-/* Constants to perform a request/check the status of a request. */
-#define RPI3_MBOX_PROCESS_REQUEST U(0x00000000)
-#define RPI3_MBOX_REQUEST_SUCCESSFUL U(0x80000000)
-#define RPI3_MBOX_REQUEST_ERROR U(0x80000001)
-
-/* Command constants */
-#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION U(0x00010002)
-#define RPI3_TAG_END U(0x00000000)
-
-#define RPI3_TAG_REQUEST U(0x00000000)
-#define RPI3_TAG_IS_RESPONSE U(0x80000000) /* Set if response */
-#define RPI3_TAG_RESPONSE_LENGTH_MASK U(0x7FFFFFFF)
-
-#define RPI3_CHANNEL_ARM_TO_VC U(0x8)
-#define RPI3_CHANNEL_MASK U(0xF)
-
-#define RPI3_MAILBOX_MAX_RETRIES U(1000000)
-
-/*******************************************************************************
- * Helpers to send requests to the VideoCore using the mailboxes.
- ******************************************************************************/
-static void rpi3_vc_mailbox_request_send(void)
-{
- uint32_t st, data;
- uintptr_t resp_addr, addr;
- unsigned int retries;
-
- /* This is the location of the request buffer */
- addr = (uintptr_t) &rpi3_mbox_buffer;
-
- /* Make sure that the changes are seen by the VideoCore */
- flush_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE);
-
- /* Wait until the outbound mailbox is empty */
- retries = 0U;
-
- do {
- st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET);
-
- retries++;
- if (retries == RPI3_MAILBOX_MAX_RETRIES) {
- ERROR("rpi3: mbox: Send request timeout\n");
- return;
- }
-
- } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U);
-
- /* Send base address of this message to start request */
- mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET,
- RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr);
-
- /* Wait until the inbound mailbox isn't empty */
- retries = 0U;
-
- do {
- st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET);
-
- retries++;
- if (retries == RPI3_MAILBOX_MAX_RETRIES) {
- ERROR("rpi3: mbox: Receive response timeout\n");
- return;
- }
-
- } while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U);
-
- /* Get location and channel */
- data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET);
-
- if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) {
- ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data);
- panic();
- }
-
- resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK);
- if (addr != resp_addr) {
- ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data);
- panic();
- }
-
- /* Make sure that the data seen by the CPU is up to date */
- inv_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE);
-}
-
-/*******************************************************************************
- * Request board revision. Returns the revision and 0 on success, -1 on error.
- ******************************************************************************/
-int rpi3_vc_hardware_get_board_revision(uint32_t *revision)
-{
- uint32_t tag_request_size = sizeof(uint32_t);
- rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer;
-
- assert(revision != NULL);
-
- VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req);
-
- req->size = sizeof(rpi3_mbox_buffer);
- req->code = RPI3_MBOX_PROCESS_REQUEST;
-
- req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION;
- req->tags[1] = tag_request_size; /* Space available for the response */
- req->tags[2] = RPI3_TAG_REQUEST;
- req->tags[3] = 0; /* Placeholder for the response */
-
- req->tags[4] = RPI3_TAG_END;
-
- rpi3_vc_mailbox_request_send();
-
- if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) {
- ERROR("rpi3: mbox: Code = 0x%08x\n", req->code);
- return -1;
- }
-
- if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) {
- ERROR("rpi3: mbox: get board revision failed (0x%08x)\n",
- req->tags[2]);
- return -1;
- }
-
- *revision = req->tags[3];
-
- return 0;
-}
--- /dev/null
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+
+#include <drivers/rpi3/mailbox/rpi3_mbox.h>
+
+#define RPI3_MBOX_BUFFER_SIZE U(256)
+static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE];
+
+/*******************************************************************************
+ * Request board revision. Returns the revision and 0 on success, -1 on error.
+ ******************************************************************************/
+int rpi3_vc_hardware_get_board_revision(uint32_t *revision)
+{
+ uint32_t tag_request_size = sizeof(uint32_t);
+ rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer;
+
+ assert(revision != NULL);
+
+ VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req);
+
+ req->size = sizeof(rpi3_mbox_buffer);
+ req->code = RPI3_MBOX_PROCESS_REQUEST;
+
+ req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION;
+ req->tags[1] = tag_request_size; /* Space available for the response */
+ req->tags[2] = RPI3_TAG_REQUEST;
+ req->tags[3] = 0; /* Placeholder for the response */
+
+ req->tags[4] = RPI3_TAG_END;
+
+ rpi3_vc_mailbox_request_send(req, RPI3_MBOX_BUFFER_SIZE);
+
+ if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) {
+ ERROR("rpi3: mbox: Code = 0x%08x\n", req->code);
+ return -1;
+ }
+
+ if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) {
+ ERROR("rpi3: mbox: get board revision failed (0x%08x)\n",
+ req->tags[2]);
+ return -1;
+ }
+
+ *revision = req->tags[3];
+
+ return 0;
+}
projects / project / bcm63xx / atf.git / commitdiff