target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         leds: leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_power: power {
  20                         label = "green:power";
  21                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  22                         default-state = "on";
  23                 };
  24
  25                 eco {
  26                         label = "green:eco";
  27                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wlan5g {
  31                         label = "green:wlan5g";
  32                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy0tpt";
  34                 };
  35
  36                 wlan2g {
  37                         label = "green:wlan2g";
  38                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  39                         linux,default-trigger = "phy1tpt";
  40                 };
  41
  42                 notification {
  43                         label = "amber:notification";
  44                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47
  48         keys: keys {
  49                 compatible = "gpio-keys";
  50
  51                 eco {
  52                         label = "eco";
  53                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  54                         linux,code = <BTN_1>;
  55                         debounce-interval = <60>;
  56                 };
  57
  58                 auto {
  59                         label = "auto";
  60                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  61                         linux,code = <BTN_0>;
  62                         linux,input-type = <EV_SW>;
  63                         debounce-interval = <60>;
  64                 };
  65
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  69                         linux,code = <KEY_WPS_BUTTON>;
  70                         debounce-interval = <60>;
  71                 };
  72
  73                 reset {
  74                         label = "reset";
  75                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_RESTART>;
  77                         debounce-interval = <60>;
  78                 };
  79
  80                 router {
  81                         label = "router";
  82                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  83                         linux,code = <BTN_0>;
  84                         linux,input-type = <EV_SW>;
  85                         debounce-interval = <60>;
  86                 };
  87         };
  88 };
  89
  90 &spi {
  91         status = "okay";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <25000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         partition@0 {
 104                                 label = "u-boot";
 105                                 reg = <0x000000 0x030000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@30000 {
 110                                 label = "u-boot-env";
 111                                 reg = <0x030000 0x010000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@40000 {
 116                                 compatible = "denx,uimage";
 117                                 label = "firmware";
 118                                 reg = <0x040000 0xe50000>;
 119                         };
 120
 121                         partition@e90000 {
 122                                 label = "manufacture";
 123                                 reg = <0xe90000 0x100000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@f90000 {
 128                                 label = "backup";
 129                                 reg = <0xf90000 0x010000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@fa0000 {
 134                                 label = "storage";
 135                                 reg = <0xfa0000 0x050000>;
 136                                 read-only;
 137                         };
 138
 139                         art: partition@ff0000 {
 140                                 label = "art";
 141                                 reg = <0xff0000 0x010000>;
 142                                 read-only;
 143
 144                                 nvmem-layout {
 145                                         compatible = "fixed-layout";
 146                                         #address-cells = <1>;
 147                                         #size-cells = <1>;
 148
 149                                         cal_art_5000: calibration@5000 {
 150                                                 reg = <0x5000 0x844>;
 151                                         };
 152                                 };
 153                         };
 154                 };
 155         };
 156 };
 157
 158 &mdio0 {
 159         status = "okay";
 160
 161         phy0: ethernet-phy@0 {
 162                 reg = <0>;
 163
 164                 qca,ar8327-initvals = <
 165                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 166                         0x7c 0x0000007e /* PORT0_STATUS */
 167                 >;
 168         };
 169 };
 170
 171 &eth0 {
 172         status = "okay";
 173
 174         pll-data = <0xa6000000 0x00000101 0x00001616>;
 175         phy-handle = <&phy0>;
 176 };
 177
 178 &pcie1 {
 179         status = "okay";
 180
 181         wifi@0,0 {
 182                 compatible = "pci168c,003c";
 183                 reg = <0x0000 0 0 0 0>;
 184                 nvmem-cells = <&cal_art_5000>;
 185                 nvmem-cell-names = "calibration";
 186         };
 187 };
 188
 189 &usb_phy0 {
 190         status = "okay";
 191 };
 192
 193 &usb0 {
 194         status = "okay";
 195 };
 196
 197 &wmac {
 198         status = "okay";
 199
 200         qca,no-eeprom;
 201 };