uboot-sunxi: dts: Update orange Pi R1 integration

This syncs the Orange Pi R1 device tree files with the one from the
upstream kernel and also uses the default configuration from the Orange
Pi Zero.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch b/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch
deleted file mode 100644 (file)
index 65ae63c..0000000
--- a/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch
+++ /dev/null
@@ -1,182 +0,0 @@
-From 1f92596cc520f760589289059a5aa739366dd19c Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 26 Sep 2017 22:16:59 +0200
-Subject: sunxi: add device tree for Orange Pi R1 board
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/dts/Makefile                      |   1 +
- arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 157 +++++++++++++++++++++++++++++
- 2 files changed, 158 insertions(+)
- create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
-       sun8i-a83t-cubietruck-plus.dtb \
-       sun8i-a83t-sinovoip-bpi-m3.dtb
- dtb-$(CONFIG_MACH_SUN8I_H3) += \
-+      sun8i-h2-plus-orangepi-r1.dtb \
-       sun8i-h2-plus-orangepi-zero.dtb \
-       sun8i-h3-bananapi-m2-plus.dtb \
-       sun8i-h3-orangepi-2.dtb \
---- /dev/null
-+++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
-@@ -0,0 +1,157 @@
-+/*
-+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on sun8i-h2-plus-orangepi-zero.dts, which is:
-+ *   Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
-+ *
-+ * Based on sun8i-h3-orangepi-one.dts, which is:
-+ *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-h3.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+      model = "Xunlong Orange Pi R1";
-+      compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
-+
-+      aliases {
-+              serial0 = &uart0;
-+              /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
-+              ethernet1 = &xr819;
-+      };
-+
-+      chosen {
-+              stdout-path = "serial0:115200n8";
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+
-+              pwr_led {
-+                      label = "orangepi:green:pwr";
-+                      gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+                      default-state = "on";
-+              };
-+
-+              status_led {
-+                      label = "orangepi:red:status";
-+                      gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+
-+      reg_vcc_wifi: reg_vcc_wifi {
-+              compatible = "regulator-fixed";
-+              regulator-min-microvolt = <3300000>;
-+              regulator-max-microvolt = <3300000>;
-+              regulator-name = "vcc-wifi";
-+              enable-active-high;
-+              gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
-+      };
-+
-+      wifi_pwrseq: wifi_pwrseq {
-+              compatible = "mmc-pwrseq-simple";
-+              reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+      };
-+};
-+
-+&ehci1 {
-+      status = "okay";
-+};
-+
-+&emac {
-+      phy = <&phy1>;
-+      phy-mode = "mii";
-+      allwinner,use-internal-phy;
-+      allwinner,leds-active-low;
-+      status = "okay";
-+      phy1: ethernet-phy@1 {
-+              reg = <1>;
-+      };
-+};
-+
-+&mmc0 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&mmc0_pins_a>;
-+      vmmc-supply = <&reg_vcc3v3>;
-+      bus-width = <4>;
-+      cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+      cd-inverted;
-+      status = "okay";
-+};
-+
-+&mmc1 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&mmc1_pins_a>;
-+      vmmc-supply = <&reg_vcc_wifi>;
-+      mmc-pwrseq = <&wifi_pwrseq>;
-+      bus-width = <4>;
-+      non-removable;
-+      status = "okay";
-+
-+      /*
-+       * Explicitly define the sdio device, so that we can add an ethernet
-+       * alias for it (which e.g. makes u-boot set a mac-address).
-+       */
-+      xr819: sdio_wifi@1 {
-+              reg = <1>;
-+      };
-+};
-+
-+&ohci1 {
-+      status = "okay";
-+};
-+
-+&uart0 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&uart0_pins_a>;
-+      status = "okay";
-+};
-+
-+&usbphy {
-+      /* USB VBUS is always on */
-+      status = "okay";
-+};

diff --git a/package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch b/package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch
deleted file mode 100644 (file)
index 6240fe3..0000000
--- a/package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 231201c71b902b5999ed9b143f2a54674cfae88a Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 26 Sep 2017 22:17:33 +0200
-Subject: sunxi: add orangepi R1 defconfig
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- board/sunxi/MAINTAINERS       |  5 +++++
- configs/orangepi_r1_defconfig | 19 +++++++++++++++++++
- 2 files changed, 24 insertions(+)
- create mode 100644 configs/orangepi_r1_defconfig
-
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -302,6 +302,11 @@ M:        Jagan Teki <jagan@amarulasolutions.co
- S:    Maintained
- F:    configs/orangepi_prime_defconfig
- 
-+ORANGEPI R1 BOARD
-+M:    Hauke Mehrtens <hauke@hauke-m.de>
-+S:    Maintained
-+F:    configs/orangepi_r1_defconfig
-+
- PINE64 BOARDS
- M:    Andre Przywara <andre.przywara@arm.com>
- S:    Maintained
---- /dev/null
-+++ b/configs/orangepi_r1_defconfig
-@@ -0,0 +1,19 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL_SPI_FLASH_SUPPORT=y
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=624
-+CONFIG_DRAM_ZQ=3881979
-+CONFIG_DRAM_ODT_EN=y
-+# CONFIG_VIDEO_DE2 is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_CONSOLE_MUX=y
-+CONFIG_SPL=y
-+# CONFIG_CMD_IMLS is not set
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_CMD_FPGA is not set
-+CONFIG_SPL_SPI_SUNXI=y
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y

diff --git a/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch b/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch
new file mode 100644 (file)
index 0000000..af45982
--- /dev/null
+++ b/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch
@@ -0,0 +1,157 @@
+From 068fb0d5728c5ec93cb961718d59e7c718886edd Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Tue, 26 Sep 2017 22:16:59 +0200
+Subject: sunxi: Add support for Orange Pi R1
+
+The device tree files are also submitted for inclusion into the Linux
+kernel.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/dts/Makefile                      |  1 +
+ arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 77 ++++++++++++++++++++++++++++++
+ board/sunxi/MAINTAINERS                    |  5 ++
+ configs/orangepi_r1_defconfig              | 26 ++++++++++
+ 4 files changed, 109 insertions(+)
+ create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
+ create mode 100644 configs/orangepi_r1_defconfig
+
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+       sun8i-a83t-cubietruck-plus.dtb \
+       sun8i-a83t-sinovoip-bpi-m3.dtb
+ dtb-$(CONFIG_MACH_SUN8I_H3) += \
++      sun8i-h2-plus-orangepi-r1.dtb \
+       sun8i-h2-plus-orangepi-zero.dtb \
+       sun8i-h3-bananapi-m2-plus.dtb \
+       sun8i-h3-orangepi-2.dtb \
+--- /dev/null
++++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
+@@ -0,0 +1,91 @@
++/*
++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/* Orange Pi R1 is based on Orange Pi Zero design */
++#include "sun8i-h2-plus-orangepi-zero.dts"
++
++/ {
++      model = "Xunlong Orange Pi R1";
++      compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
++
++      /delete-node/ reg_vcc_wifi;
++
++      /*
++       * Ths pin of this regulator is the same with the Wi-Fi extra
++       * regulator on the original Zero. However it's used for USB
++       * Ethernet rather than the Wi-Fi now.
++       */
++      reg_vcc_usb_eth: reg-vcc-usb-ethernet {
++              compatible = "regulator-fixed";
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              regulator-name = "vcc-usb-ethernet";
++              enable-active-high;
++              gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
++      };
++
++      aliases {
++              ethernet1 = &rtl8189etv;
++      };
++};
++
++&ohci1 {
++      /*
++       * RTL8152B USB-Ethernet adapter is connected to USB1,
++       * and it's a USB 2.0 device. So the OHCI1 controller
++       * can be left disabled.
++       */
++      status = "disabled";
++};
++
++&mmc1 {
++      vmmc-supply = <&reg_vcc3v3>;
++      vqmmc-supply = <&reg_vcc3v3>;
++
++      rtl8189etv: sdio_wifi@1 {
++              reg = <1>;
++      };
++};
++
++&usbphy {
++      usb1_vbus-supply = <&reg_vcc_usb_eth>;
++};
+--- a/board/sunxi/MAINTAINERS
++++ b/board/sunxi/MAINTAINERS
+@@ -302,6 +302,11 @@ M:        Jagan Teki <jagan@amarulasolutions.co
+ S:    Maintained
+ F:    configs/orangepi_prime_defconfig
+ 
++ORANGEPI R1 BOARD
++M:    Hauke Mehrtens <hauke@hauke-m.de>
++S:    Maintained
++F:    configs/orangepi_r1_defconfig
++
+ PINE64 BOARDS
+ M:    Andre Przywara <andre.przywara@arm.com>
+ S:    Maintained
+--- /dev/null
++++ b/configs/orangepi_r1_defconfig
+@@ -0,0 +1,18 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL_SPI_FLASH_SUPPORT=y
++CONFIG_MACH_SUN8I_H3=y
++CONFIG_DRAM_CLK=624
++CONFIG_DRAM_ZQ=3881979
++CONFIG_DRAM_ODT_EN=y
++# CONFIG_VIDEO_DE2 is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_CONSOLE_MUX=y
++CONFIG_SPL=y
++# CONFIG_CMD_IMLS is not set
++# CONFIG_CMD_FLASH is not set
++# CONFIG_CMD_FPGA is not set
++CONFIG_SPL_SPI_SUNXI=y
++CONFIG_SUN8I_EMAC=y
++CONFIG_USB_EHCI_HCD=y