--- /dev/null
+/*
+ * Support for YunCore SR3200 and XD3200 boards
+ *
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/ar8216_platform.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define SR3200_XD3200_GPIO_LED_SYSTEM 1
+#define SR3200_XD3200_GPIO_LED_WLAN2G 19
+
+#define SR3200_XD3200_GPIO_BTN_RESET 2
+
+#define SR3200_XD3200_KEYS_POLL_INTERVAL 20
+#define SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL \
+ (3 * SR3200_XD3200_KEYS_POLL_INTERVAL)
+
+static struct gpio_led xd3200_leds_gpio[] __initdata = {
+ {
+ .name = "xd3200:green:system",
+ .gpio = SR3200_XD3200_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "xd3200:blue:wlan2g",
+ .gpio = SR3200_XD3200_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led sr3200_leds_gpio[] __initdata = {
+ {
+ .name = "sr3200:green:system",
+ .gpio = SR3200_XD3200_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "sr3200:green:wlan2g",
+ .gpio = SR3200_XD3200_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button sr3200_xd3200_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = SR3200_XD3200_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static const struct ar8327_led_info sr3200_leds_qca833x[] = {
+ AR8327_LED_INFO(PHY0_0, HW, "sr3200:green:lan1"),
+ AR8327_LED_INFO(PHY1_0, HW, "sr3200:green:lan2"),
+ AR8327_LED_INFO(PHY2_0, HW, "sr3200:green:lan3"),
+ AR8327_LED_INFO(PHY3_0, HW, "sr3200:green:lan4"),
+ AR8327_LED_INFO(PHY4_0, HW, "sr3200:green:wan"),
+};
+
+static const struct ar8327_led_info xd3200_leds_qca833x[] = {
+ AR8327_LED_INFO(PHY1_0, HW, "xd3200:green:lan"),
+ AR8327_LED_INFO(PHY2_0, HW, "xd3200:green:wan"),
+};
+
+/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
+static struct ar8327_led_cfg sr3200_xd3200_qca833x_led_cfg = {
+ .led_ctrl0 = 0xcf37cf37,
+ .led_ctrl1 = 0xcf37cf37,
+ .led_ctrl2 = 0xcf37cf37,
+ .led_ctrl3 = 0x0,
+ .open_drain = true,
+};
+
+static struct ar8327_pad_cfg sr3200_xd3200_qca833x_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data sr3200_xd3200_qca833x_data = {
+ .pad0_cfg = &sr3200_xd3200_qca833x_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &sr3200_xd3200_qca833x_led_cfg,
+};
+
+static struct mdio_board_info sr3200_xd3200_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &sr3200_xd3200_qca833x_data,
+ },
+};
+
+static void __init sr3200_xd3200_common_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(sr3200_xd3200_mdio0_info,
+ ARRAY_SIZE(sr3200_xd3200_mdio0_info));
+
+ /* GMAC0 is connected to QCA8334/QCA8337N switch */
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(mac + 0x1000, NULL);
+
+ ap91_pci_init(mac + 0x5000, NULL);
+
+ ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_SYSTEM, true);
+ ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_WLAN2G, true);
+
+ /* Mute LEDs on boot */
+ gpio_set_value(SR3200_XD3200_GPIO_LED_SYSTEM, 1);
+ gpio_set_value(SR3200_XD3200_GPIO_LED_WLAN2G, 1);
+
+ ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_SYSTEM, 0);
+ ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_WLAN2G, 0);
+
+ ath79_register_gpio_keys_polled(-1, SR3200_XD3200_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(sr3200_xd3200_gpio_keys),
+ sr3200_xd3200_gpio_keys);
+}
+
+static void __init sr3200_setup(void)
+{
+ sr3200_xd3200_qca833x_data.leds = sr3200_leds_qca833x;
+ sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(sr3200_leds_qca833x);
+
+ sr3200_xd3200_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(sr3200_leds_gpio),
+ sr3200_leds_gpio);
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_SR3200, "SR3200", "YunCore SR3200", sr3200_setup);
+
+static void __init xd3200_setup(void)
+{
+ sr3200_xd3200_qca833x_data.leds = xd3200_leds_qca833x;
+ sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(xd3200_leds_qca833x);
+
+ sr3200_xd3200_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(xd3200_leds_gpio),
+ xd3200_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_XD3200, "XD3200", "YunCore XD3200", xd3200_setup);
projects / openwrt / openwrt.git / commitdiff