--- /dev/null
+From 092ccf0415c720a1e9458a46fe75f77574027a55 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Tue, 18 Jul 2017 12:37:37 -0700
+Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board
+ support
+
+Adds support for the Broadcom reference board BCM947189ACDMBR which
+features the following:
+
+* 128MB of DRAM
+* External MoCA support through a Broadcom BCM6802 chip
+* 1x external Gigabit PHY through the external BCM6802
+* 1x USB 2.0 port
+* 1x PCIE slot
+* Few configurable buttons and LEDs
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 3 +-
+ arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
+ 2 files changed, 99 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -93,7 +93,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm953012hr.dtb \
+ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
+- bcm47189-tenda-ac9.dtb
++ bcm47189-tenda-ac9.dtb \
++ bcm947189acdbmr.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ bcm963138dvt.dtb
+ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
+@@ -0,0 +1,97 @@
++/*
++ * Copyright (C) 2017 Broadcom
++ * Author: Florian Fainelli <f.fainelli@gmail.com>
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
++ model = "Broadcom BCM947189ACDBMR";
++
++ chosen {
++ bootargs = "console=ttyS0,115200 earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ wps {
++ label = "bcm53xx:blue:wps";
++ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
++ };
++
++ 5ghz {
++ label = "bcm53xx:blue:5ghz";
++ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
++ };
++
++ 2ghz {
++ label = "bcm53xx:blue:2ghz";
++ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
++ };
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ spi {
++ compatible = "spi-gpio";
++ num-chipselects = <1>;
++ gpio-sck = <&chipcommon 21 0>;
++ gpio-miso = <&chipcommon 22 0>;
++ gpio-mosi = <&chipcommon 23 0>;
++ cs-gpios = <&chipcommon 24 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ /* External BCM6802 MoCA chip is connected */
++ };
++};
++
++&pcie0 {
++ ranges = <0x00000000 0 0 0 0 0x00100000>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ bridge@0,0,0 {
++ reg = <0x0000 0 0 0 0>;
++ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ wifi@0,1,0 {
++ reg = <0x0000 0 0 0 0>;
++ ranges = <0x00000000 0 0 0 0x00100000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ };
++ };
++};
++
++&usb2 {
++ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
++};
--- /dev/null
+From 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 17 Aug 2017 11:05:14 +0200
+Subject: [PATCH] ARM: BCM53573: Specify ports for USB LED for Tenda AC9
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
+leds: document new trigger-sources property") to specify USB ports. Such an
+information can be used by operating system to setup LEDs behavior.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 2 ++
+ arch/arm/boot/dts/bcm53573.dtsi | 4 ++++
+ 2 files changed, 6 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+@@ -26,6 +26,8 @@
+ usb {
+ label = "bcm53xx:blue:usb";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>;
++ linux,default-trigger = "usbport";
+ };
+
+ wps {
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -138,10 +138,12 @@
+
+ ehci_port1: port@1 {
+ reg = <1>;
++ #trigger-source-cells = <0>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
++ #trigger-source-cells = <0>;
+ };
+ };
+
+@@ -158,10 +160,12 @@
+
+ ohci_port1: port@1 {
+ reg = <1>;
++ #trigger-source-cells = <0>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
++ #trigger-source-cells = <0>;
+ };
+ };
+ };
--- /dev/null
+From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 6 Oct 2017 10:52:35 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul
+ XWR-1200
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This info can be used by operating system to setup LED behavior.
+
+Reported-by: Dan Haab <dhaab@luxul.com>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -57,7 +57,8 @@
+ usb {
+ label = "bcm53xx:green:usb";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+- linux,default-trigger = "none";
++ trigger-sources = <&ohci_port2>, <&ehci_port2>;
++ linux,default-trigger = "usbport";
+ };
+
+ status {
--- /dev/null
+From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:22 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
+board design.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-tplink-archer-c9-v1.dtb \
+ bcm47094-dlink-dir-885l.dtb \
+ bcm47094-linksys-panamera.dtb \
++ bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-netgear-r8500.dtb \
+ bcm94708.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (C) 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
++ model = "Luxul XBR-4500 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "timer";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++ status = "okay";
++};
--- /dev/null
+From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:23 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
+board design.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-tplink-archer-c9-v1.dtb \
+ bcm47094-dlink-dir-885l.dtb \
+ bcm47094-linksys-panamera.dtb \
++ bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-netgear-r8500.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (C) 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
++ model = "Luxul ABR-4500 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++ status = "okay";
++};
--- /dev/null
+From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:59 -0600
+Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
+used for 2.4 GHz.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++
+ 2 files changed, 88 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm953012hr.dtb \
+ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
++ bcm47189-luxul-xap-810.dtb \
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -0,0 +1,87 @@
++/*
++ * Copyright 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
++ model = "Luxul XAP-810 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ 5ghz {
++ label = "bcm53xx:blue:5ghz";
++ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++
++ system {
++ label = "bcm53xx:green:system";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "timer";
++ };
++ };
++
++ pcie0_leds {
++ compatible = "gpio-leds";
++
++ 2ghz {
++ label = "bcm53xx:blue:2ghz";
++ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&pcie0 {
++ ranges = <0x00000000 0 0 0 0 0x00100000>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ bridge@0,0,0 {
++ reg = <0x0000 0 0 0 0>;
++ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ wifi@0,1,0 {
++ reg = <0x0000 0 0 0 0>;
++ ranges = <0x00000000 0 0 0 0x00100000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ pcie0_chipcommon: chipcommon@0 {
++ reg = <0 0x1000>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++ };
++ };
++};
--- /dev/null
+From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:47:00 -0600
+Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
+chipset used for 2.4 GHz.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++
+ 2 files changed, 51 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm953012hr.dtb \
+ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
++ bcm47189-luxul-xap-1440.dtb \
+ bcm47189-luxul-xap-810.dtb \
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -0,0 +1,50 @@
++/*
++ * Copyright 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
++ model = "Luxul XAP-1440 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ wlan {
++ label = "bcm53xx:blue:wlan";
++ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ system {
++ label = "bcm53xx:green:system";
++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
+ bootargs = "console=ttyS0,115200 earlycon";
};
+ memory {
+--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -14,7 +14,7 @@
+ model = "Luxul ABR-4500 V1";
+
+ chosen {
+- bootargs = "earlycon";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -14,7 +14,7 @@
+ model = "Luxul XBR-4500 V1";
+
+ chosen {
+- bootargs = "earlycon";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -13,7 +13,7 @@
+ model = "Luxul XAP-1440 V1";
+
+ chosen {
+- bootargs = "earlycon";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -13,7 +13,7 @@
+ model = "Luxul XAP-810 V1";
+
+ chosen {
+- bootargs = "earlycon";
++ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
memory {
projects / openwrt / openwrt.git / commitdiff