--- /dev/null
+From 1b47b98acce2db0da632d056821420b33205b8b2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 19 Apr 2016 08:56:46 +0200
+Subject: [PATCH] ARM: BCM5301X: Add DT entry for SPI controller and NOR flash
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Controller is present on every BCM4708* board but only few devices have
+serial flash attached so mark it as disabled by default.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -59,3 +59,7 @@
+ &uart0 {
+ status = "okay";
+ };
++
++&spi_nor {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -122,3 +122,7 @@
+ &uart0 {
+ status = "okay";
+ };
++
++&spi_nor {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -225,6 +225,20 @@
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
++
++ spi@29000 {
++ reg = <0x00029000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ spi_nor: spi-nor@0 {
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ spi-max-frequency = <20000000>;
++ linux,part-probe = "ofpart", "bcm47xxpart";
++ status = "disabled";
++ };
++ };
+ };
+
+ lcpll0: lcpll0@1800c100 {
--- /dev/null
+From 5f79985dcfec73d7a09ed99c40c28b64552518fe Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 27 Apr 2016 09:05:03 +0200
+Subject: [PATCH] ARM: BCM5301X: Enable SPI-NOR on dual flash devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and
+NOR flash") enabled SPI-NOR device on routers using serial flash only.
+However there are also devices with two flash memories:
+1) Small SPI attached flash used mostly for booting
+2) Bigger NAND used mostly for storing firmware
+On such devices we still need SPI-NOR e.g. to access NVRAM data.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++++
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++++
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++++
+ 5 files changed, 20 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -147,3 +147,7 @@
+ &usb3 {
+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
++
++&spi_nor {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -90,3 +90,7 @@
+ &usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
++
++&spi_nor {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -82,3 +82,7 @@
+ };
+ };
+ };
++
++&spi_nor {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -131,3 +131,7 @@
+ &usb2 {
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ };
++
++&spi_nor {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -113,3 +113,7 @@
+ &usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ };
++
++&spi_nor {
++ status = "okay";
++};
+++ /dev/null
-From 1b47b98acce2db0da632d056821420b33205b8b2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 19 Apr 2016 08:56:46 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT entry for SPI controller and NOR flash
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Controller is present on every BCM4708* board but only few devices have
-serial flash attached so mark it as disabled by default.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -59,3 +59,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -122,3 +122,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -225,6 +225,20 @@
- #address-cells = <1>;
- #size-cells = <1>;
- };
-+
-+ spi@29000 {
-+ reg = <0x00029000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ spi_nor: spi-nor@0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <20000000>;
-+ linux,part-probe = "ofpart", "bcm47xxpart";
-+ status = "disabled";
-+ };
-+ };
- };
-
- lcpll0: lcpll0@1800c100 {
--- /dev/null
+From 59f0ce1a3ebb9288fc8c1400aa503e923621161e Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 23 May 2016 16:38:00 -0700
+Subject: [PATCH 1/3] ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
+
+Add the Switch Register Access Block which is a special piece of
+hardware allowing us to perform indirect read/writes towards the
+integrated BCM5301X Ethernet switch.
+
+We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi
+bus node to get proper binding between the BCMA instantiated core and
+the Device Tree nodes. We will need that to be able to reference
+Ethernet Device Tree nodes in a future patch adding the switch ports
+layout.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 27 +++++++++++++++++++++++++++
+ 1 file changed, 27 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -239,6 +239,22 @@
+ status = "disabled";
+ };
+ };
++
++ gmac0: ethernet@24000 {
++ reg = <0x24000 0x800>;
++ };
++
++ gmac1: ethernet@25000 {
++ reg = <0x25000 0x800>;
++ };
++
++ gmac2: ethernet@26000 {
++ reg = <0x26000 0x800>;
++ };
++
++ gmac3: ethernet@27000 {
++ reg = <0x27000 0x800>;
++ };
+ };
+
+ lcpll0: lcpll0@1800c100 {
+@@ -260,6 +276,17 @@
+ "sata2";
+ };
+
++ srab: srab@18007000 {
++ compatible = "brcm,bcm5301x-srab";
++ reg = <0x18007000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ status = "disabled";
++
++ /* ports are defined in board DTS */
++ };
++
+ nand: nand@18028000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
--- /dev/null
+From 2cd0c0202f138fa95b3fbb027e87b191ad0b1884 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Tue, 24 May 2016 11:41:58 -0700
+Subject: [PATCH 2/3] ARM: dts: BCM5301X: Add SRAB interrupts
+
+Add interrupt mapping for the Switch Register Access Block. Only 12
+interrupts are usable at the moment even though up to 32 are dedicated
+to the SRAB.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -153,6 +153,21 @@
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
++ /* Switch Register Access Block */
++ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
++
+ /* PCIe Controller 0 */
+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
--- /dev/null
+From 2df1808dc0e2b5358e13beb95192b15200017776 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Wed, 25 May 2016 16:55:35 -0700
+Subject: [PATCH 3/3] ARM: dts: BCM5310x: Enable switch ports on SmartRG
+ SR400AC
+
+Define the port mapping for the SmartRG SR400ACE device.
+
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 40 +++++++++++++++++++++++++++
+ 1 file changed, 40 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -126,3 +126,43 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&srab {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan4";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan3";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan2";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan1";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ };
++ };
++};
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 27 Apr 2016 08:58:01 +0200
-Subject: [PATCH] ARM: BCM5301X: Enable SPI-NOR on dual flash devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and
-NOR flash") enabled SPI-NOR device on routers using serial flash only.
-However there are also devices with two flash memories:
-1) Small SPI attached flash used mostly for booting
-2) Bigger NAND used mostly for storing firmware
-On such devices we still need SPI-NOR e.g. to access NVRAM data.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -147,3 +147,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -90,3 +90,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -82,3 +82,7 @@
- };
- };
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -131,3 +131,7 @@
- &usb2 {
- vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -113,3 +113,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
projects / openwrt / openwrt.git / commitdiff