mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION))' -d $@ $@.new
+ -n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION))' -d $@ $@.new
mv $@.new $@
endef
define Build/netgear-dni
$(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(NETGEAR_BOARD_ID) -v LEDE.$(REVISION) \
+ -B $(NETGEAR_BOARD_ID) -v OpenWrt.$(REVISION) \
$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
-r "$(1)" \
-i $@ -o $@.new
rm -f $@.fakeroot
$(STAGING_DIR_HOST)/bin/mkimage \
-A $(LINUX_KARCH) -O linux -T filesystem -C none \
- -n '$(call toupper,$(LINUX_KARCH)) LEDE fakeroot' \
+ -n '$(call toupper,$(LINUX_KARCH)) OpenWrt fakeroot' \
-s \
$@.fakeroot
cat $@.fakeroot >> $@
define Image/BuildKernel/MkuImage
mkimage -A $(ARCH) -O linux -T kernel -C $(1) -a $(2) -e $(3) \
- -n '$(call toupper,$(ARCH)) LEDE Linux-$(LINUX_VERSION)' -d $(4) $(5)
+ -n '$(call toupper,$(ARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $(4) $(5)
endef
define Image/BuildKernel/MkFIT
PKG_RELEASE:=1
# Layerscape ARMv8 platforms use 64-bit u-boot to support both 32-bit and 64-bit
-# kernel/rootfs. Since LEDE could only provide 32-bit toolchain for 32-bit targets,
+# kernel/rootfs. Since OpenWrt could only provide 32-bit toolchain for 32-bit targets,
# 64-bit u-boot images git tree is provided here whose source code actually is
# uboot-layerscape's source code.
PKG_SOURCE_PROTO:=git
my $version = "0.1";
my %arg = (
o => 'bcm963xx_fs_kernel',
- b => 'LEDE',
+ b => 'OpenWrt',
c => '6348',
s => 64,
f => 0xbfc00000,
$SELF malta le64
$SELF malta be-glibc
$SELF armvirt 32 \\
- --kernel bin/targets/armvirt/32/lede-armvirt-32-zImage \\
- --rootfs bin/targets/armvirt/32/lede-armvirt-32-root.ext4
+ --kernel bin/targets/armvirt/32/openwrt-armvirt-32-zImage \\
+ --rootfs bin/targets/armvirt/32/openwrt-armvirt-32-root.ext4
EOF
}
32)
qemu_exe="qemu-system-arm"
cpu="cortex-a15"
- [ -n "$kernel" ] || kernel="$o_bindir/lede-$o_target-${o_subtarget%-*}-zImage-initramfs"
+ [ -n "$kernel" ] || kernel="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-zImage-initramfs"
;;
64)
qemu_exe="qemu-system-aarch64"
cpu="cortex-a57"
- [ -n "$kernel" ] || kernel="$o_bindir/lede-$o_target-${o_subtarget%-*}-Image-initramfs"
+ [ -n "$kernel" ] || kernel="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-Image-initramfs"
;;
*)
__errmsg "target $o_target: unknown subtarget $o_subtarget"
[ "$(echo "$o_subtarget" | grep -o '^..')" = "le" ] && isel="el"
qemu_exe="qemu-system-mips$is64$isel"
- [ -n "$kernel" ] || kernel="$o_bindir/lede-malta-${o_subtarget%-*}-vmlinux-initramfs.elf"
+ [ -n "$kernel" ] || kernel="$o_bindir/openwrt-malta-${o_subtarget%-*}-vmlinux-initramfs.elf"
# NOTE: order of wan, lan -device arguments matters as it will affect which
# one will be actually used as the wan, lan network interface inside the
local qemu_exe
[ -n "$rootfs" ] || {
- rootfs="$o_bindir/lede-$o_target-${o_subtarget%-*}-combined-ext4.img"
+ rootfs="$o_bindir/openwrt-$o_target-${o_subtarget%-*}-combined-ext4.img"
if [ ! -f "$rootfs" -a -s "$rootfs.gz" ]; then
gunzip "$rootfs.gz"
fi
config IB
- bool "Build the LEDE Image Builder"
+ bool "Build the OpenWrt Image Builder"
depends on !EXTERNAL_TOOLCHAIN
default BUILDBOT
help
# flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
-O linux -T kernel -C none \
- -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' \
+ -n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' \
-d $(IMAGE_KERNEL).dtb $@.new
@mv $@.new $@
endef
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
-m $(BOARDNAME) -s $(DAP_SIGNATURE) \
- -v LEDE -B $(REVISION)
+ -v OpenWrt -B $(REVISION)
mv $@.imghdr $@
endef
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+ -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
@mv $@.new $@
endef
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
+ edimax_fw_header -m $(5) -v "$(shell echo -n OpenWrt$(REVISION) | cut -c -13)" \
-n "uImage" \
-i $(KDIR_TMP)/vmlinux-$(2).uImage \
-o $(KDIR_TMP)/$(2)-uImage; \
- edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
+ edimax_fw_header -m $(5) -v "$(shell echo -n OpenWrt$(REVISION) | cut -c -13)" \
-n "rootfs" \
-i $(KDIR)/root.$(1) \
-o $(KDIR_TMP)/$(2)-rootfs; \
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+ -n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
@mv $@.new $@
endef
Run with qemu-system-arm
# boot with initramfs embedded in
- qemu-system-arm -nographic -M virt -m 64 -kernel lede-armvirt-32-zImage-initramfs
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage-initramfs
# boot with accel=kvm
qemu-system-arm -nographic -M virt,accel=kvm -cpu host -m 64 -kernel
- lede-armvirt-32-zImage-initramfs
+ openwrt-armvirt-32-zImage-initramfs
# boot with a separate rootfs
- qemu-system-arm -nographic -M virt -m 64 -kernel lede-armvirt-32-zImage \
- -drive file=lede-armvirt-32-root.ext4,format=raw,if=virtio -append 'root=/dev/vda rootwait'
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage \
+ -drive file=openwrt-armvirt-32-root.ext4,format=raw,if=virtio -append 'root=/dev/vda rootwait'
# boot with local dir as rootfs
- qemu-system-arm -nographic -M virt -m 64 -kernel lede-armvirt-32-zImage \
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-zImage \
-fsdev local,id=rootdev,path=root-armvirt/,security_model=none \
-device virtio-9p-pci,fsdev=rootdev,mount_tag=/dev/root \
-append 'rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p'
Run with kvmtool
# start a named machine
- lkvm run -k lede-armvirt-32-zImage -i lede-armvirt-32-rootfs.cpio --name armvirt0
+ lkvm run -k openwrt-armvirt-32-zImage -i openwrt-armvirt-32-rootfs.cpio --name armvirt0
# start with virtio-9p rootfs
- lkvm run -k lede-armvirt-32-zImage -d root-armvirt/
+ lkvm run -k openwrt-armvirt-32-zImage -d root-armvirt/
# stop "armvirt0"
lkvm stop --name armvirt0
The multi-platform ARMv8 target can be used with QEMU:
qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic \
- -kernel lede-armvirt-64-Image-initramfs \
+ -kernel openwrt-armvirt-64-Image-initramfs \
DEVICE_DTS := nb4-ser-r0
CFE_BOARD_ID := 96358VW
CFE_CHIP_ID := 6358
- CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
+ CFE_EXTRAS += --rsa-signature "OpenWrt-$(firstword $(subst -,$(space),$(REVISION)))"
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
DEVICE_DTS := nb4-fxc-r1
CFE_BOARD_ID := 96358VW
CFE_CHIP_ID := 6358
- CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
+ CFE_EXTRAS += --rsa-signature "OpenWrt-$(firstword $(subst -,$(space),$(REVISION)))"
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
DEVICE_DTS := nb6-ser-r0
CFE_BOARD_ID := NB6-SER-r0
CFE_CHIP_ID := 6362
- CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
+ CFE_EXTRAS += --rsa-signature "OpenWrt-$(firstword $(subst -,$(space),$(REVISION)))"
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
define Build/fullimage
mkimage -A mips -O linux -C lzma -T filesystem -a 0x00 \
- -e 0x00 -n 'LEDE RootFS' \
+ -e 0x00 -n 'OpenWrt RootFS' \
-d $(IMAGE_ROOTFS) $(IMAGE_ROOTFS).new
cat $(IMAGE_KERNEL) $(IMAGE_ROOTFS).new > $@.tmp
define Image/Build/MkuImage
mkimage -A arm -O linux -T kernel -a $(LOADADDR) -C none -e $(LOADADDR) \
- -n 'ARM LEDE Linux-$(LINUX_VERSION)' -d $(1) $(2);
+ -n 'ARM OpenWrt Linux-$(LINUX_VERSION)' -d $(1) $(2);
endef
define Image/Build/DTB
# generate bootargs for rootfs on MMC
if test "${devtype}" = "mmc"; then
- setexpr lede_rootpart ${distro_bootpart} + 1
- setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${lede_rootpart} rootfstype=auto rootwait
+ setexpr openwrt_rootpart ${distro_bootpart} + 1
+ setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${openwrt_rootpart} rootfstype=auto rootwait
fi
# here one could add logic for other rootfs device types such as scsi and usb
# generate bootargs for rootfs on MMC
if test "${devtype}" = "mmc"; then
- setexpr lede_rootpart ${distro_bootpart} + 1
- setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${lede_rootpart} rootfstype=auto rootwait
+ setexpr openwrt_rootpart ${distro_bootpart} + 1
+ setenv bootargs ${bootargs} root=/dev/mmcblk${devnum}p${openwrt_rootpart} rootfstype=auto rootwait
fi
# here one could add logic for other rootfs device types such as scsi and usb
-LEDE inside a user mode linux. Why would we even want this many ask?
+OpenWrt inside a user mode linux. Why would we even want this many ask?
There are potentially a lot of reasons, one obvious one to me, it allows
folks to 'kick the tires' without actually flashing up any hardware. It's
In your bin directory you will find a kernel and an ext4 root file system
when it's finished. Just run it like this:-
-bin/targets/uml/generic/lede-uml-vmlinux ubd0=bin/targets/uml/generic/lede-uml-ext4.img
+bin/targets/uml/generic/lede-uml-vmlinux
+ubd0=bin/targets/uml/generic/openwrt-uml-ext4.img
The uml will start, and eventually the serial console of the uml will be at your
console prompt. If you would like it in xterms, substitute con=xterm and con0=xterm.
set timeout="@TIMEOUT@"
set root='(cd)'
-menuentry "LEDE" {
+menuentry "OpenWrt" {
linux /boot/vmlinuz @CMDLINE@ noinitrd
}
set timeout="@TIMEOUT@"
set root='(@ROOT@)'
-menuentry "LEDE" {
+menuentry "OpenWrt" {
linux /boot/vmlinuz @CMDLINE@ noinitrd
}
-menuentry "LEDE (failsafe)" {
+menuentry "OpenWrt (failsafe)" {
linux /boot/vmlinuz failsafe=true @CMDLINE@ noinitrd
}
config SDK
- bool "Build the LEDE SDK"
+ bool "Build the OpenWrt SDK"
depends on !EXTERNAL_TOOLCHAIN
default BUILDBOT
help
This is essentially a stripped-down version of the buildroot
with a precompiled toolchain. It can be used to develop and
- test packages for LEDE before including them in the buildroot
+ test packages for OpenWrt before including them in the buildroot
-This is the LEDE SDK. It contains a stripped-down version of
+This is the OpenWrt SDK. It contains a stripped-down version of
the buildroot. You can use it to test/develop packages without
having to compile your own toolchain or any of the libraries
-included with LEDE.
+included with OpenWrt.
To use it, just put your buildroot-compatible package directory
(including its dependencies) in the subdir 'package/' and run
config MAKE_TOOLCHAIN
- bool "Package the LEDE-based Toolchain"
+ bool "Package the OpenWrt-based Toolchain"
depends on !EXTERNAL_TOOLCHAIN
help
Package the created toolchain as a tarball under the bin/ directory as
- LEDE-Toolchain-$(BOARD)-for-$(ARCH)$(ARCH_SUFFIX)-gcc-$(GCCV)$(DIR_SUFFIX).
+ OpenWrt-Toolchain-$(BOARD)-for-$(ARCH)$(ARCH_SUFFIX)-gcc-$(GCCV)$(DIR_SUFFIX).
For example, a toolchain for the MIPS architecture might be named
- LEDE-Toolchain-malta-for-mipsel_mips32-gcc-4.8-linaro_uClibc-0.9.33.2.tar.bz2.
+ OpenWrt-Toolchain-malta-for-mipsel_mips32-gcc-4.8-linaro_uClibc-0.9.33.2.tar.bz2.
projects / openwrt / openwrt.git / commitdiff