iw: enable MESH ID in scan output
authorMatthias Schiffer <mschiffer@universe-factory.net>
Sat, 25 Mar 2017 12:43:29 +0000 (13:43 +0100)
committerMatthias Schiffer <mschiffer@universe-factory.net>
Sat, 25 Mar 2017 13:55:10 +0000 (14:55 +0100)
Make scan output useful for 802.11s meshes. The common print_ssid function
is used, so this doesn't add any additional code.

Based-on-patch-by: Jan-Tarek Butt <tarek@ring0.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
package/network/utils/iw/patches/200-reduce_size.patch

index 98836783df9b3b458fcb3dcd130c39cbd3744e7f..3f92982a4ad4df1d286c012943f7d4b2ca2c6494 100644 (file)
        printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3);
        printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]);
        printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2);
-@@ -1380,6 +1381,13 @@ static void print_ie(const struct ie_pri
+@@ -1380,6 +1381,14 @@ static void print_ie(const struct ie_pri
  
  static const struct ie_print ieprinters[] = {
        [0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
 +      [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
 +      [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), },
 +      [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), },
++      [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
 +      [191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), },
 +      [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), },
 +#if 0
        [1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
        [3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), },
        [5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), },
-@@ -1389,14 +1397,8 @@ static const struct ie_print ieprinters[
+@@ -1389,21 +1398,15 @@ static const struct ie_print ieprinters[
        [32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), },
        [35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), },
        [42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), },
 -      [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
        [50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
        [113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), },
-       [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
-@@ -1404,6 +1406,7 @@ static const struct ie_print ieprinters[
+-      [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
+       [127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), },
        [107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
        [108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), },
        [111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), },