ar71xx: add support for COMFAST CF-E355AC
authorEnrique Giraldo <enrique.giraldo@galgus.net>
Thu, 29 Jun 2017 10:03:03 +0000 (12:03 +0200)
committerPiotr Dymacz <pepe2k@gmail.com>
Sun, 10 Sep 2017 20:15:03 +0000 (22:15 +0200)
commitfefdb1e0b9e0cc22ab93e6fcf51dc9e917565d26
tree5ba243a989b80029c3a93ccae602262568a66d15
parent90d8c0f0a2f4c902348a2f514ba33f2c9c34e005
ar71xx: add support for COMFAST CF-E355AC

COMFAST CF-E355AC is a ceiling mount AP with PoE support, based on
Qualcomm/Atheros QCA9531 + QCA9882.

Short specification:

- 2x 10/100 Mbps Ethernet, with PoE support
- 64MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, 802.11b/g/n
- 2T2R 5 GHz, 802.11ac/n/a
- built-in 4x 3 dBi antennas
- output power (max): 500 mW (27 dBm)
- 1x RGB LED, 1x button
- built-in watchdog chipset

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Enrique Giraldo <enrique.giraldo@galgus.net>
[whitespace fixes, ac radio caldata offset fix]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
12 files changed:
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/generic.mk
target/linux/ar71xx/mikrotik/config-default
target/linux/ar71xx/nand/config-default