ralink: add support for netis WF-2881
authorJohn Crispin <john@openwrt.org>
Tue, 24 Nov 2015 18:29:26 +0000 (18:29 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 24 Nov 2015 18:29:26 +0000 (18:29 +0000)
commit8c1f5141ceee722cdd282f909390b73455968cfd
treef37042f2bd325756225021795d066c6e1e228e64
parent4223e47c19ca38c37b123884dca55630c77ed791
ralink: add support for netis WF-2881

netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

this device only works on top of UBI.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade

Tested and not working
* failsafe

Signed-off-by: YounJae Rho <luxflow@live.com>
SVN-Revision: 47619
target/linux/ramips/Makefile
target/linux/ramips/base-files/etc/board.d/01_leds
target/linux/ramips/base-files/etc/board.d/02_network
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/base-files/lib/upgrade/platform.sh
target/linux/ramips/dts/WF-2881.dts [new file with mode: 0644]
target/linux/ramips/image/Makefile
target/linux/ramips/mt7621/config-3.18
target/linux/ramips/mt7621/profiles/netis.mk [new file with mode: 0644]