target/linux/lantiq/dts/ARV4518PWR01.dtsi

   1 #include "danube.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200";
   8         };
   9
  10         aliases {
  11                 led-boot = &power;
  12                 led-failsafe = &power;
  13                 led-running = &power;
  14
  15                 led-dsl = &dsl;
  16                 led-internet = &online;
  17                 led-usb = &usb;
  18                 led-wifi = &wifi;
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         sram@1F000000 {
  26                 vmmc@107000 {
  27                         status = "okay";
  28                         gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
  29                 };
  30         };
  31
  32         fpi@10000000 {
  33                 localbus@0 {
  34                         nor-boot@0 {
  35                                 compatible = "lantiq,nor";
  36                                 bank-width = <2>;
  37                                 reg = <0 0x0 0x2000000>;
  38                                 #address-cells = <1>;
  39                                 #size-cells = <1>;
  40
  41                                 partitions {
  42                                         compatible = "fixed-partitions";
  43                                         #address-cells = <1>;
  44                                         #size-cells = <1>;
  45
  46                                         partition@0 {
  47                                                 label = "uboot";
  48                                                 reg = <0x00000 0x10000>; /* 64 KB */
  49                                                 read-only;
  50                                         };
  51
  52                                         partition@10000 {
  53                                                 label = "uboot_env";
  54                                                 reg = <0x10000 0x10000>; /* 64 KB */
  55                                                 read-only;
  56                                         };
  57
  58                                         partition@20000 {
  59                                                 label = "firmware";
  60                                                 reg = <0x20000 0x3d0000>;
  61                                         };
  62
  63                                         boardconfig: partition@400000 {
  64                                                 label = "boardconfig";
  65                                                 reg = <0x3f0000 0x10000>;
  66                                                 read-only;
  67                                         };
  68                                 };
  69                         };
  70
  71                         gpiomm: gpiomm@4000000 {
  72                                 compatible = "lantiq,gpio-mm";
  73                                 reg = <1 0x0 0x10 >;
  74                                 #address-cells = <1>;
  75                                 #size-cells = <1>;
  76                                 #gpio-cells = <2>;
  77                                 gpio-controller;
  78                                 lantiq,shadow = <0x0>;
  79                         };
  80
  81                         ath5k_eep {
  82                                 compatible = "ath5k,eeprom";
  83                                 ath,eep-flash = <&boardconfig 0x400>;
  84                                 ath,mac-offset = <0x16>;
  85                                 ath,mac-increment = <1>;
  86                                 ath,eep-swap;
  87                         };
  88                 };
  89
  90                 gpio: pinmux@E100B10 {
  91                         pinctrl-names = "default";
  92                         pinctrl-0 = <&state_default>;
  93
  94                         state_default: pinmux {
  95                                 ebu {
  96                                         lantiq,groups = "ebu cs1";
  97                                         lantiq,function = "ebu";
  98                                 };
  99                                 pci_in {
 100                                         lantiq,groups = "req1", "req2";
 101                                         lantiq,function = "pci";
 102                                         lantiq,open-drain = <1>;
 103                                         lantiq,pull = <2>;
 104                                         lantiq,output = <0>;
 105                                 };
 106                                 pci_out {
 107                                         lantiq,groups = "gnt1", "gnt2";
 108                                         lantiq,function = "pci";
 109                                         lantiq,pull = <0>;
 110                                         lantiq,output = <1>;
 111                                 };
 112                         };
 113                 };
 114
 115                 etop@E180000 {
 116                         phy-mode = "mii";
 117                         mtd-mac-address = <&boardconfig 0x16>;
 118                 };
 119
 120                 ifxhcd@E101000 {
 121                         status = "okay";
 122                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
 123                 };
 124
 125                 pci@E105400 {
 126                         status = "okay";
 127                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 128                         req-mask = <0xf>;
 129                 };
 130         };
 131
 132         gpio-keys-polled {
 133                 compatible = "gpio-keys-polled";
 134                 #address-cells = <1>;
 135                 #size-cells = <0>;
 136                 poll-interval = <100>;
 137
 138                 rfkill {
 139                         label = "rfkill";
 140                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 141                         linux,code = <KEY_RFKILL>;
 142                 };
 143                 reset {
 144                         label = "reset";
 145                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
 146                         linux,code = <KEY_RESTART>;
 147                 };
 148         };
 149
 150         gpio-leds {
 151                 compatible = "gpio-leds";
 152                 power: power {
 153                         label = "power";
 154                         gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
 155                         default-state = "keep";
 156                 };
 157                 dsl: dsl {
 158                         label = "dsl";
 159                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 160                 };
 161                 online: online {
 162                         label = "online";
 163                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 164                 };
 165                 wifi: wifi {
 166                         label = "wifi";
 167                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 168                 };
 169                 wps {
 170                         label = "wps";
 171                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 172                 };
 173                 dsl2 {
 174                         label = "dsl2";
 175                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 176                 };
 177                 usb: usb {
 178                         label = "usb";
 179                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 180                 };
 181                 voice {
 182                         label = "voice";
 183                         gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
 184                 };
 185                 fxs1 {
 186                         label = "fxs1";
 187                         gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
 188                 };
 189                 fxs2 {
 190                         label = "fxs2";
 191                         gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
 192                 };
 193                 fxo {
 194                         label = "fxo";
 195                         gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
 196                 };
 197         };
 198 };