package/boot/uboot-oxnas/files/include/configs/ox820.h

   1 #ifndef __CONFIG_H
   2 #define __CONFIG_H
   3
   4 /* High Level Configuration Options */
   5 #define CONFIG_ARM1136
   6 #define CONFIG_OX820
   7 #define CONFIG_SYS_GENERIC_BOARD
   8 #define CONFIG_BOARD_EARLY_INIT_F
   9
  10 #include <asm/arch/cpu.h>       /* get chip and board defs */
  11
  12 /* make cmd_ide.c quiet when compile */
  13 #define __io
  14
  15 /*#define CONFIG_ARCH_CPU_INIT*/
  16 /*#define CONFIG_DISPLAY_CPUINFO*/
  17 /*#define CONFIG_DISPLAY_BOARDINFO*/
  18 /*#define CONFIG_BOARD_EARLY_INIT_F*/
  19 /*#define CONFIG_SKIP_LOWLEVEL_INIT*/
  20
  21 /* mem */
  22 #define CONFIG_SYS_SDRAM_BASE           0x60000000
  23 #define CONFIG_NR_DRAM_BANKS            1
  24 #define CONFIG_MIN_SDRAM_SIZE           (128 * 1024 * 1024)     /* 128 MB */
  25 #define CONFIG_MAX_SDRAM_SIZE           (512 * 1024 * 1024)     /* 512 MB */
  26 #define CONFIG_SRAM_BASE                0x50000000
  27 #define CONFIG_SRAM_SIZE                (64 * 1024)
  28
  29 /* need do dma so better keep dcache off */
  30 #define CONFIG_SYS_DCACHE_OFF
  31
  32 /* clock */
  33 #define CONFIG_PLLA_FREQ_MHZ            800
  34 #define CONFIG_RPSCLK                   6250000
  35 #define CONFIG_SYS_HZ                   1000
  36 #define CONFIG_SYS_CLK_FREQ             CONFIG_RPSCLK
  37 #define CONFIG_SYS_TIMERBASE            TIMER1_BASE
  38 #define CONFIG_TIMER_PRESCALE           TIMER_PRESCALE_16
  39
  40 /* serial */
  41 #define CONFIG_SYS_NS16550
  42 #define CONFIG_SYS_NS16550_SERIAL
  43 #define CONFIG_SYS_NS16550_CLK          CONFIG_RPSCLK
  44 #define CONFIG_SYS_NS16550_REG_SIZE     1
  45 #define CONFIG_BAUDRATE                 115200
  46 #define CONFIG_SYS_NS16550_COM1         UART_1_BASE
  47 #define CONFIG_CONS_INDEX               1
  48
  49 /* ide */
  50 #define CONFIG_SYS_ATA_BASE_ADDR        0
  51 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  52 #define CONFIG_SYS_ATA_REG_OFFSET       0
  53 #define CONFIG_SYS_ATA_ALT_OFFSET       0
  54 #define CONFIG_IDE_PLX
  55 #define CONFIG_SYS_IDE_MAXDEVICE        2
  56 #define CONFIG_SYS_IDE_MAXBUS           1
  57 #define CONFIG_IDE_PREINIT
  58 #define CONFIG_LBA48
  59
  60 /* nand */
  61 #define CONFIG_NAND
  62 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  63 #define CONFIG_SYS_NAND_BASE            STATIC_CS0_BASE
  64 #define NAND_CLE_ADDR_PIN               19
  65 #define NAND_ALE_ADDR_PIN               18
  66 #define MTDPARTS_DEFAULT                "mtdparts=41000000.nand:" \
  67                                                 "14m(boot)," \
  68                                                 "-(ubi)"
  69 #define MTDIDS_DEFAULT                  "nand0=41000000.nand"
  70 #define UBIPART_DEFAULT                 "ubi"
  71
  72 /* net */
  73 #define CONFIG_DESIGNWARE_ETH
  74 #define CONFIG_DW_ALTDESCRIPTOR
  75 #define CONFIG_MII
  76 #define CONFIG_CMD_MII
  77 #define CONFIG_PHYLIB
  78 #define CONFIG_PHY_REALTEK
  79 #define CONFIG_PHY_ICPLUS
  80
  81 /* spl */
  82 #ifdef CONFIG_SPL_BUILD
  83 #define USE_DL_PREFIX   /* rename malloc free etc, so we can override them */
  84 #endif
  85
  86 #if defined(CONFIG_BOOT_FROM_NAND) || defined(CONFIG_BOOT_FROM_SATA)
  87 #define CONFIG_SPL
  88 #define CONFIG_SPL_FRAMEWORK
  89 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  90 #define CONFIG_SPL_SERIAL_SUPPORT
  91 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  92 #define CONFIG_SPL_TEXT_BASE                    0x50000000
  93 #define CONFIG_SPL_STACK                        (CONFIG_SRAM_BASE + (48 * 1024))
  94 #define CONFIG_SPL_DISPLAY_PRINT
  95 #define CONFIG_SPL_BSS_DRAM_START                       0x65000000
  96 #define CONFIG_SPL_BSS_DRAM_SIZE                        0x01000000
  97 #define CONFIG_SPL_MALLOC_START                         0x66000000
  98 #endif
  99
 100 #if defined(CONFIG_BOOT_FROM_NAND)
 101 #define CONFIG_SPL_NAND_SUPPORT
 102 #define BOOT_DEVICE_TYPE                        "NAND"
 103 #define BOOT_DEVICE_NAND                        0xfeedbacc
 104 #define CONFIG_SPL_BOOT_DEVICE                  BOOT_DEVICE_NAND
 105 #define CONFIG_SPL_NAND_SIMPLE
 106 #define CONFIG_SPL_NAND_ECC
 107 #define CONFIG_SPL_NAND_SOFTECC
 108 #define CONFIG_SYS_NAND_ECCSIZE                 512
 109 #define CONFIG_SYS_NAND_ECCBYTES                6
 110 #define CONFIG_SYS_NAND_ECCPOS                  {40, 41, 42, 43, 44, 45, 46, 47, \
 111                                                 48, 49, 50, 51, 52, 53, 54, 55, \
 112                                                 56, 57, 58, 59, 60, 61, 62, 63}
 113 #define CONFIG_SYS_NAND_PAGE_SIZE               2048
 114 #define CONFIG_SYS_NAND_OOBSIZE                 64
 115 #define CONFIG_SYS_NAND_BLOCK_SIZE              (128 * 1024)
 116 #define CONFIG_SYS_NAND_BAD_BLOCK_POS           0
 117 /* pages per erase block */
 118 #define CONFIG_SYS_NAND_PAGE_COUNT              (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE)
 119 /* nand spl use 1 erase block, and use bit to byte encode for reliability */
 120 #define CONFIG_SPL_MAX_SIZE                     (128 * 1024 / 8)
 121 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x00040000
 122 /* spl kernel load is not enabled */
 123 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS         0x00200000
 124 #define CONFIG_CMD_SPL_NAND_OFS                 0
 125 #define CONFIG_CMD_SPL_WRITE_SIZE               1024
 126 #define CONFIG_SYS_SPL_ARGS_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x100)
 127 /* CONFIG_BOOT_FROM_NAND end */
 128
 129 #elif defined(CONFIG_BOOT_FROM_SATA)
 130 #define CONFIG_SPL_BLOCK_SUPPORT
 131 #define BOOT_DEVICE_TYPE                                "SATA"
 132 #define BOOT_DEVICE_BLOCK                               860202
 133 #define CONFIG_SPL_BOOT_DEVICE                          BOOT_DEVICE_BLOCK
 134 #define CONFIG_SPL_MAX_SIZE                             (36 * 1024)
 135 #define CONFIG_SPL_LIBDISK_SUPPORT
 136 #define CONFIG_SPL_BLOCKDEV_INTERFACE                   "ide"
 137 #define CONFIG_SPL_BLOCKDEV_ID                          0
 138
 139 #ifdef CONFIG_BOOT_FROM_FAT /* u-boot in fat partition */
 140
 141 #define CONFIG_SPL_FAT_SUPPORT
 142
 143 #define CONFIG_BLOCKDEV_FAT_BOOT_PARTITION              1 /* first partition */
 144 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME                "u-boot.img" /* u-boot file name */
 145 /* enable U-Boot Falcon Mode */
 146 #define CONFIG_CMD_SPL
 147 #define CONFIG_SPL_OS_BOOT
 148 #define CONFIG_SPL_FAT_LOAD_ARGS_NAME                   "bootargs.bin" /* boot parameters */
 149 #define CONFIG_SPL_FAT_LOAD_KERNEL_NAME                 "falcon.img" /* kernel */
 150 #define CONFIG_SYS_SPL_ARGS_ADDR                        (CONFIG_SYS_SDRAM_BASE + 0x100)
 151
 152 #elif CONFIG_BOOT_FROM_EXT4
 153
 154 #define CONFIG_SPL_EXT4_SUPPORT
 155 #define CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION             1 /* first partition */
 156 #define CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME               "/boot/u-boot.img" /* u-boot file name */
 157 /* enable U-Boot Falcon Mode */
 158 #define CONFIG_CMD_SPL
 159 #define CONFIG_SPL_OS_BOOT
 160 #define CONFIG_SPL_EXT4_LOAD_ARGS_NAME                  "/boot/bootargs.bin" /* boot parameters */
 161 #define CONFIG_SPL_EXT4_LOAD_KERNEL_NAME                "/boot/falcon.img" /* kernel */
 162 #define CONFIG_SYS_SPL_ARGS_ADDR                        (CONFIG_SYS_SDRAM_BASE + 0x100)
 163
 164 #else /* u-boot in raw sectors */
 165
 166 #define CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR         1024
 167 /* spl kernel load is not enabled */
 168 #define CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR         4096
 169 #define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR           0
 170 #define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS          (1024 / 512)
 171 #define CONFIG_SYS_SPL_ARGS_ADDR                        (CONFIG_SYS_SDRAM_BASE + 0x100)
 172
 173 #endif /* CONFIG_BOOT_FROM_FAT */
 174 /* CONFIG_BOOT_FROM_SATA end */
 175
 176 #else
 177 /* generic, no spl support */
 178 #endif
 179
 180 /* boot */
 181 #define CONFIG_IDENT_STRING             " for OXNAS"
 182 #define CONFIG_MACH_TYPE                MACH_TYPE_OXNAS
 183 #ifndef CONFIG_SPL_BUILD
 184 /* Enable devicetree support */
 185 #define CONFIG_OF_LIBFDT
 186 #endif
 187 #define CONFIG_SETUP_MEMORY_TAGS
 188 #define CONFIG_CMDLINE_TAG
 189 #define CONFIG_INITRD_TAG
 190 #define CONFIG_BOOTDELAY                1
 191 #define CONFIG_ZERO_BOOTDELAY_CHECK
 192 #define CONFIG_DEFAULT_CONSOLE_PARM     "console=ttyS0,115200n8 earlyprintk=serial"
 193 /* Boot Argument Buffer Size */
 194 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 195 /* memtest works on */
 196 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE)
 197 #define CONFIG_SYS_AUTOLOAD             "no"
 198
 199 #define CONFIG_DEFAULT_CONSOLE          CONFIG_DEFAULT_CONSOLE_PARM "\0"
 200 #define CONFIG_BOOTARGS                 CONFIG_DEFAULT_CONSOLE_PARM
 201 #define CONFIG_BOOTCOMMAND              "run nandboot"
 202 #define CONFIG_BOOT_RETRY_TIME          -1
 203 #define CONFIG_RESET_TO_RETRY           60
 204
 205 #define CONFIG_NETCONSOLE
 206 #define CONFIG_IPADDR                   192.168.50.100
 207 #define CONFIG_SERVERIP                 192.168.50.59
 208
 209 /* A sane default configuration...
 210  * When booting without a valid environment in ubi, first to loading and booting
 211  * the kernel image directly above U-Boot, maybe both were loaded there by
 212  * another bootloader.
 213  * Also use that same offset (0x90000) to load the rescue image later on (by
 214  * adding it onto the flash address where U-Boot is supposed to be stored by
 215  * the legacy loader, 0x440000, resulting in offset 0x4d0000 on the flash).
 216  * When coming up with a valid environment in ubi, first try to load the
 217  * kernel from a ubi volume kernel, if that fails, fallback to the rescue
 218  * image stored in boot partition. As a last resort try booting via
 219  * DHCP/TFTP.
 220  * In case there is no valid environment, first probe for a uimage in ram left
 221  * behind by the first bootloader on a tftp boot.
 222  * If that fails, switch to normal boot order and save environment.
 223  * The loader is supposed to be written to flash at offset 0x440000 and loaded to
 224  * RAM at 0x64000000
 225  */
 226 #define CONFIG_EXTRA_ENV_SETTINGS       \
 227         "load_kernel_ubi=ubi readvol 0x62000000 kernel;\0" \
 228         "load_kernel_rescue=nand read 0x62000000 0x4e0000 0x400000;\0" \
 229         "load_kernel_dhcp=dhcp 0x62000000 oxnas-rescue.bin;\0" \
 230         "boot_kernel=bootm 0x62000000;\0" \
 231         "boot_ubi=run load_kernel_ubi && run boot_kernel;\0" \
 232         "boot_rescue=run load_kernel_rescue && run boot_kernel;\0" \
 233         "boot_dhcp=run load_kernel_dhcp && run boot_kernel;\0" \
 234         "normalboot=run boot_ubi; run boot_rescue; run boot_dhcp;\0" \
 235         "firstboot=bootm 0x640a0000; setenv bootcmd run normalboot; " \
 236         "setenv firstboot; saveenv; run bootcmd; \0" \
 237         "bootcmd=run firstboot; \0" \
 238         "console=" CONFIG_DEFAULT_CONSOLE \
 239         "bootargs=" CONFIG_BOOTARGS "\0" \
 240         "mtdids=" MTDIDS_DEFAULT "\0" \
 241         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 242
 243 /* env */
 244 #if defined(CONFIG_BOOT_FROM_NAND)
 245 #define CONFIG_ENV_IS_IN_NAND
 246 #define CONFIG_ENV_OFFSET               0x000C0000
 247 #define CONFIG_ENV_SIZE                 0x00020000
 248 #define CONFIG_ENV_OFFSET_REDUND        0x00100000
 249 #define CONFIG_ENV_SIZE_REDUND          0x00020000
 250 #define CONFIG_ENV_RANGE                (CONFIG_ENV_SIZE * 2)
 251 /* CONFIG_BOOT_FROM_NAND end */
 252
 253 #elif defined(CONFIG_BOOT_FROM_SATA)
 254 #ifdef CONFIG_BOOT_FROM_EXT4
 255 #define CONFIG_ENV_IS_IN_EXT4
 256 #define CONFIG_START_IDE
 257 #define EXT4_ENV_INTERFACE              "ide"
 258 #define EXT4_ENV_DEVICE                 0
 259 #define EXT4_ENV_PART                   1
 260 #define EXT4_ENV_FILE                   "/boot/u-boot.env"
 261 #define CONFIG_ENV_SIZE                 (16 * 1024)
 262 #else
 263 #define CONFIG_ENV_IS_IN_FAT
 264 #define CONFIG_START_IDE
 265 #define FAT_ENV_INTERFACE               "ide"
 266 #define FAT_ENV_DEVICE                  0
 267 #define FAT_ENV_PART                    1
 268 #define FAT_ENV_FILE                    "u-boot.env"
 269 #define CONFIG_ENV_SIZE                 (16 * 1024)
 270 #endif
 271 /* CONFIG_BOOT_FROM_SATA end */
 272 #elif defined(CONFIG_BOOT_FROM_SATA)
 273
 274 #else
 275 /* generic */
 276 #define CONFIG_ENV_IS_IN_UBI            1
 277 #define CONFIG_ENV_UBI_PART             UBIPART_DEFAULT
 278 #define CONFIG_ENV_UBI_VOLUME           "ubootenv"
 279 #define CONFIG_ENV_UBI_VOLUME_REDUND    "ubootenv2"
 280 #define CONFIG_ENV_SIZE                 (16 * 1024)
 281 #endif
 282
 283 /* allow to overwrite serial and ethaddr */
 284 #define CONFIG_ENV_OVERWRITE
 285
 286 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 287 #define CONFIG_SYS_TEXT_BASE            0x64000000
 288 #define CONFIG_SYS_INIT_SP_ADDR         0x65000000
 289 /* Size of malloc() pool */
 290 #define CONFIG_SYS_MALLOC_LEN           (1 * 1024 * 1024)
 291
 292 /* Miscellaneous configurable options */
 293 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 294 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser    */
 295 #define CONFIG_SYS_PROMPT               "OX820 # "
 296 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size*/
 297 #define CONFIG_SYS_PBSIZE               1024    /* Print Buffer Size */
 298 #define CONFIG_SYS_MAXARGS              32      /* max number of command args */
 299 #define CONFIG_CMDLINE_EDITING
 300 #define CONFIG_AUTO_COMPLETE
 301
 302 /* usb */
 303 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 304 #define CONFIG_USB_EHCI
 305 #define CONFIG_EHCI_IS_TDI
 306 /* #define CONFIG_USB_EHCI_TXFIFO_THRESH        0x3F */
 307 #define CONFIG_USB_PLLB_CLK
 308 #define CONFIG_USB_EHCI_OXNAS
 309 #ifndef CONFIG_SPL_BUILD
 310 #define CONFIG_USB_STORAGE
 311 #endif
 312 #define CONFIG_CMD_USB
 313
 314 /* cmds */
 315 #define CONFIG_SYS_NO_FLASH
 316 #include <config_cmd_default.h>
 317
 318 #define CONFIG_CMD_SAVEENV
 319 #define CONFIG_CMD_ASKENV
 320 #define CONFIG_CMD_GREPENV
 321 #define CONFIG_CMD_ENV_FLAGS
 322
 323 #define CONFIG_CMD_NET
 324 #define CONFIG_CMD_DHCP
 325 #define CONFIG_CMD_NFS
 326 #define CONFIG_CMD_PING
 327 #define CONFIG_CMD_PXE
 328
 329 #define CONFIG_CMD_NAND
 330 #define CONFIG_CMD_MTDPARTS
 331 #define CONFIG_CMD_UBI
 332 #define CONFIG_CMD_UBIFS
 333
 334 #define CONFIG_CMD_IDE
 335 #define CONFIG_CMD_FAT
 336 #define CONFIG_FAT_WRITE
 337 #define CONFIG_CMD_EXT2
 338 #define CONFIG_CMD_EXT4
 339 #ifndef CONFIG_SPL_BUILD
 340 #define CONFIG_CMD_EXT4_WRITE
 341 #endif
 342
 343 #define CONFIG_CMD_ZIP
 344 #define CONFIG_CMD_UNZIP
 345 #define CONFIG_CMD_TIME
 346 #define CONFIG_CMD_SETEXPR
 347 #define CONFIG_CMD_MD5SUM
 348 #define CONFIG_CMD_HASH
 349 #define CONFIG_CMD_INI
 350 #define CONFIG_CMD_GETTIME
 351 #define CONFIG_CMD_BOOTMENU
 352 #define CONFIG_CMD_ELF
 353
 354 #define CONFIG_DOS_PARTITION
 355 #define CONFIG_EFI_PARTITION
 356
 357 /* for CONFIG_CMD_MTDPARTS */
 358 #define CONFIG_MTD_DEVICE
 359 /* for CONFIG_CMD_UBI */
 360 #define CONFIG_MTD_PARTITIONS
 361 /* for CONFIG_CMD_UBI */
 362 #define CONFIG_RBTREE
 363
 364 /* optional, for CONFIG_CMD_BOOTM & required by CONFIG_CMD_UBIFS */
 365 #define CONFIG_LZO
 366 #define CONFIG_LZMA
 367 #define CONFIG_BZIP2
 368
 369 /* for CONFIG_CMD_ZIP */
 370 #define CONFIG_GZIP_COMPRESSED
 371 /* for CONFIG_CMD_MD5SUM */
 372 #define CONFIG_MD5
 373 #define CONFIG_MD5SUM_VERIFY
 374 /* enable CONFIG_CMD_HASH's verification feature */
 375 #define CONFIG_HASH_VERIFY
 376 #define CONFIG_REGEX
 377 /* for CONFIG_CMD_BOOTMENU & CONFIG_CMD_PXE */
 378 #define CONFIG_MENU
 379
 380 /* for new FIT uImage format generated in OpenWrt */
 381 #define CONFIG_FIT
 382
 383 #endif  /* __CONFIG_H */