X-Git-Url: http://git.openwrt.org/?p=project%2Fuqmi.git;a=blobdiff_plain;f=commands-wds.h;h=de025d78669e5ccc9e214dffa2d7bf2b2d47ab78;hp=3076bae2d94b55bcc245c1e045ca7716be8c6b12;hb=HEAD;hpb=423a7e9c9448a247e121a9e79f9ac1a1e8bb5e56

diff --git a/commands-wds.h b/commands-wds.h
deleted file mode 100644
index 3076bae..0000000
--- a/commands-wds.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * uqmi -- tiny QMI support implementation
- *
- * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the
- * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301 USA.
- */
-
-#define __uqmi_wds_commands \
-	__uqmi_command(wds_start_network, start-network, no, QMI_SERVICE_WDS), \
-	__uqmi_command(wds_set_apn, apn, required, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_set_auth, auth-type, required, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_set_username, username, required, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_set_password, password, required, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_set_ip_family_pref, ip-family, required, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_set_autoconnect, autoconnect, no, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_stop_network, stop-network, required, QMI_SERVICE_WDS), \
-	__uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS), \
-	__uqmi_command(wds_set_ip_family, set-ip-family, required, QMI_SERVICE_WDS), \
-	__uqmi_command(wds_set_autoconnect_setting, set-autoconnect, required, QMI_SERVICE_WDS), \
-	__uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS), \
-	__uqmi_command(wds_get_current_settings, get-current-settings, no, QMI_SERVICE_WDS) \
-
-
-#define wds_helptext \
-		"  --start-network:                  Start network connection (use with options below)\n" \
-		"    --apn <apn>:                    Use APN\n" \
-		"    --auth-type pap|chap|both|none: Use network authentication type\n" \
-		"    --username <name>:              Use network username\n" \
-		"    --password <password>:          Use network password\n" \
-		"    --ip-family <family>:           Use ip-family for the connection (ipv4, ipv6, unspecified)\n" \
-		"    --autoconnect:                  Enable automatic connect/reconnect\n" \
-		"  --stop-network <pdh>:             Stop network connection (use with option below)\n" \
-		"    --autoconnect:                  Disable automatic connect/reconnect\n" \
-		"  --get-data-status:                Get current data access status\n" \
-		"  --set-ip-family <val>:            Set ip-family (ipv4, ipv6, unspecified)\n" \
-		"  --set-autoconnect <val>:          Set automatic connect/reconnect (disabled, enabled, paused)\n" \
-		"  --get-current-settings:           Get current connection settings\n" \
-