uqmi: print radio interfaces in serving system command

[project/uqmi.git] / qmi-enums-wda.h

diff --git a/qmi-enums-wda.h b/qmi-enums-wda.h
deleted file mode 100644 (file)
index d44994b..0000000
--- a/qmi-enums-wda.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
-/*
- * libqmi-glib -- GLib/GIO based library to control QMI devices
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the
- * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301 USA.
- *
- * Copyright (C) 2014-2017 Aleksander Morgado <aleksander@aleksander.es>
- */
-
-#ifndef _LIBQMI_GLIB_QMI_ENUMS_WDA_H_
-#define _LIBQMI_GLIB_QMI_ENUMS_WDA_H_
-
-/**
- * SECTION: qmi-enums-wda
- *
- * This section defines enumerations and flags used in the WDA service
- * interface.
- */
-
-/**
- * QmiWdaLinkLayerProtocol:
- * @QMI_WDA_LINK_LAYER_PROTOCOL_UNKNOWN: Unknown.
- * @QMI_WDA_LINK_LAYER_PROTOCOL_802_3: 802.3 ethernet mode.
- * @QMI_WDA_LINK_LAYER_PROTOCOL_RAW_IP: Raw IP mode.
- *
- * Link layer protocol.
- *
- * Since: 1.10
- */
-typedef enum { /*< since=1.10 >*/
-    QMI_WDA_LINK_LAYER_PROTOCOL_UNKNOWN = 0x00,
-    QMI_WDA_LINK_LAYER_PROTOCOL_802_3   = 0x01,
-    QMI_WDA_LINK_LAYER_PROTOCOL_RAW_IP  = 0x02,
-} QmiWdaLinkLayerProtocol;
-
-/**
- * QmiWdaDataAggregationProtocol:
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_DISABLED: Disabled.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_TLP: TLP enabled.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_QC_NCM: QC NCM enabled.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_MBIM: MBIM enabled.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_RNDIS: RNDIS enabled.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAP: QMAP enabled.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV2: QMAPV2 enabled. Since: 1.30.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV3: QMAPV3 enabled. Since: 1.30.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV4: QMAPV4 enabled. Since: 1.30.
- * @QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV5: QMAPV5 enabled. Since: 1.28.
- *
- * Data aggregation protocol in uplink or downlink.
- *
- * Since: 1.10
- */
-typedef enum { /*< since=1.10 >*/
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_DISABLED = 0x00,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_TLP      = 0x01,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_QC_NCM   = 0x02,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_MBIM     = 0x03,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_RNDIS    = 0x04,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAP     = 0x05,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV2   = 0x06,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV3   = 0x07,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV4   = 0x08,
-    QMI_WDA_DATA_AGGREGATION_PROTOCOL_QMAPV5   = 0x09,
-} QmiWdaDataAggregationProtocol;
-
-#endif /* _LIBQMI_GLIB_QMI_ENUMS_WDA_H_ */