uqmi: print radio interfaces in serving system command

[project/uqmi.git] / commands-dms.h

diff --git a/commands-dms.h b/commands-dms.h
deleted file mode 100644 (file)
index ccafbb1..0000000
--- a/commands-dms.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * uqmi -- tiny QMI support implementation
- *
- * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the
- * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301 USA.
- */
-
-#define __uqmi_dms_commands                                                                                            \
-       __uqmi_command(dms_get_capabilities, get-capabilities, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_get_pin_status, get-pin-status, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_verify_pin1, verify-pin1, required, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_verify_pin2, verify-pin2, required, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_set_pin1_protection, set-pin1-protection, required, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_set_pin2_protection, set-pin2-protection, required, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_set_pin, pin, required, CMD_TYPE_OPTION), \
-       __uqmi_command(dms_change_pin1, change-pin1, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_change_pin2, change-pin2, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_unblock_pin1, unblock-pin1, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_unblock_pin2, unblock-pin2, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_set_puk, puk, required, CMD_TYPE_OPTION), \
-       __uqmi_command(dms_set_new_pin, new-pin, required, CMD_TYPE_OPTION), \
-       __uqmi_command(dms_get_iccid, get-iccid, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_get_imsi, get-imsi, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_get_imei, get-imei, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_get_msisdn, get-msisdn, no, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_set_operating_mode, set-device-operating-mode, required, QMI_SERVICE_DMS), \
-       __uqmi_command(dms_reset, reset-dms, no, QMI_SERVICE_DMS) \
-
-#define dms_helptext \
-               "  --get-capabilities:               List device capabilities\n" \
-               "  --get-pin-status:                 Get PIN verification status\n" \
-               "  --verify-pin1 <pin>:              Verify PIN1\n" \
-               "  --verify-pin2 <pin>:              Verify PIN2\n" \
-               "  --set-pin1-protection <state>:    Set PIN1 protection state (disabled, enabled)\n" \
-               "    --pin <pin>:                    PIN1 needed to change state\n" \
-               "  --set-pin2-protection <state>:    Set PIN2 protection state (disabled, enabled)\n" \
-               "    --pin <pin2>:                   PIN2 needed to change state\n" \
-               "  --change-pin1:                    Change PIN1\n" \
-               "    --pin <old pin>:                Current PIN1\n" \
-               "    --new-pin <new pin>:            New pin\n" \
-               "  --change-pin2:                    Change PIN2\n" \
-               "    --pin <old pin>:                Current PIN2\n" \
-               "    --new-pin <new pin>:            New pin\n" \
-               "  --unblock-pin1:                   Unblock PIN1\n" \
-               "    --puk <puk>:                    PUK needed to unblock\n" \
-               "    --new-pin <new pin>:            New pin\n" \
-               "  --unblock-pin2:                   Unblock PIN2\n" \
-               "    --puk <puk>:                    PUK needed to unblock\n" \
-               "    --new-pin <new pin>:            New pin\n" \
-               "  --get-iccid:                      Get the ICCID\n" \
-               "  --get-imsi:                       Get International Mobile Subscriber ID\n" \
-               "  --get-imei:                       Get International Mobile Equipment ID\n" \
-               "  --get-msisdn:                     Get the MSISDN (telephone number)\n" \
-               "  --reset-dms:                      Reset the DMS service\n" \
-               "  --set-device-operating-mode <m>   Set the device operating mode\n" \
-               "                                    (modes: online, low_power, factory_test, offline\n" \
-               "                                     reset, shutting_down, persistent_low_power,\n" \
-               "                                     mode_only_low_power)\n" \
-