From d48cc5e0449fec6f7717e85a68f06a61abd7b0ae Mon Sep 17 00:00:00 2001 From: Wang JiaWei Date: Sat, 25 Feb 2017 07:19:15 +0800 Subject: [PATCH] ramips: add support for HiWiFi HC5661A HC5661A is almost the same as HC5661 but MT7628AN is used instead of MT7620A. - MT7628AN - 128 MiB DDR2 RAM (W971GG6KB-25) - 16 MiB SPI NOR flash (W25Q128) - SD slot (not work yet) - 1+4 x 100M Ethernet - 802.11 b/g/n Wi-Fi - 3 x LED - 1 x button - UART pad on PCB (JP1: TX, RX, GND, 3.3V) The factory flash layout seems different from HC5661. "hwf_config" is renamed to "oem" and its size changes to 0x20000. It is modified accordingly in the dts file. 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "hw_panic" 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000160000 : "kernel" 0x000000160000-0x000000fc0000 : "rootfs" 0x000000bb0000-0x000000fc0000 : "rootfs_data" 0x000000fc0000-0x000000fe0000 : "oem" 0x000000fe0000-0x000000ff0000 : "bdinfo" 0x000000ff0000-0x000001000000 : "backup" 0x000000050000-0x000000fc0000 : "firmware" To install LEDE, enabled the "developer mode", which will *void your warranty* and open the SSH server at port 1022. sysupgrade -n -F lede-ramips-mt7628-hc5661a-squashfs-sysupgrade.bin SD slot: - Tried to add modules kmod-sdhci kmod-sdhci-mt7620, and corresponding dts block. - It will block WAN + 3xLAN ports, only one LAN works. - I'm not sure why, everything else works fine. Signed-off-by: Wang JiaWei --- .../ramips/base-files/etc/board.d/01_leds | 3 +- .../ramips/base-files/etc/board.d/02_network | 4 +- target/linux/ramips/base-files/etc/diag.sh | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/HC5661A.dts | 123 ++++++++++++++++++ target/linux/ramips/image/mt7628.mk | 7 + 7 files changed, 140 insertions(+), 2 deletions(-) create mode 100644 target/linux/ramips/dts/HC5661A.dts diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 4e6eeb26ba..be3306d308 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -181,7 +181,8 @@ gl-mt300n|\ gl-mt750) set_wifi_led "$board:wlan" ;; -hc5661) +hc5661|\ +hc5661a) ucidef_set_led_default "system" "system" "$board:blue:system" "1" ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2" set_wifi_led "$board:blue:wlan2g" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index e8d360eca5..507eb8a062 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -79,6 +79,7 @@ ramips_setup_interfaces() dir-610-a1|\ dir-615-h1|\ firewrt|\ + hc5661a|\ hlk-rm04|\ mac1200rv2|\ miwifi-mini|\ @@ -343,7 +344,8 @@ ramips_setup_macs() e1700) wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; - hc5*61) + hc5*61|\ + hc5661a) lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "` [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 744ff3c2e6..a1297e26f5 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -140,6 +140,7 @@ get_status_led() { status_led="$board:orange:status" ;; hc5*61|\ + hc5661a|\ jhr-n805r|\ jhr-n926r|\ mlw221|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3072531901..5800aacd82 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -217,6 +217,9 @@ ramips_board_detect() { *"HC5661") name="hc5661" ;; + *"HC5661A") + name="hc5661a" + ;; *"HC5761") name="hc5761" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index acdfdaf84e..06931c8b16 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -62,6 +62,7 @@ platform_check_image() { gl-mt300n|\ gl-mt750|\ hc5*61|\ + hc5661a|\ hg255d|\ hlk-rm04|\ hpm|\ diff --git a/target/linux/ramips/dts/HC5661A.dts b/target/linux/ramips/dts/HC5661A.dts new file mode 100644 index 0000000000..f462606f7b --- /dev/null +++ b/target/linux/ramips/dts/HC5661A.dts @@ -0,0 +1,123 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "HC5661A", "mediatek,mt7628an-soc"; + model = "HiWiFi HC5661A"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + system { + label = "hc5661a:blue:system"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + internet { + label = "hc5661a:blue:internet"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + }; + wlan2g { + label = "hc5661a:blue:wlan2g"; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "refclk", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "hw_panic"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf70000>; + }; + + partition@fc0000 { + label = "oem"; + reg = <0xfc0000 0x20000>; + read-only; + }; + + bdinfo: partition@fe0000 { + label = "bdinfo"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "backup"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + status = "okay"; +}; diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk index 0304921f41..6292d45562 100644 --- a/target/linux/ramips/image/mt7628.mk +++ b/target/linux/ramips/image/mt7628.mk @@ -11,6 +11,13 @@ define Device/mt7628 endef TARGET_DEVICES += mt7628 +define Device/hc5661a + DTS := HC5661A + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := HiWiFi HC5661A +endef +TARGET_DEVICES += hc5661a + define Device/miwifi-nano DTS := MIWIFI-NANO IMAGE_SIZE := $(ralink_default_fw_size_16M) -- 2.30.2