ramips: add support for Afoundry EW-1200

[openwrt/staging/yousong.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 2d8d8edc29d4a027220b56e18537e2390c87e491..c67f3d58b3ba3f614630e2432acc8c050f35d65d 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -72,12 +72,16 @@ ramips_setup_interfaces()
        3g-6200n|\
        ac1200pro|\
        ai-br100|\
+       d240|\
        db-wrt01|\
        dir-300-b7|\
        dir-320-b1|\
        dir-610-a1|\
        dir-615-h1|\
+       ew1200|\
        firewrt|\
+       hc5661a|\
+       hc5962|\
        hlk-rm04|\
        mac1200rv2|\
        miwifi-mini|\
@@ -193,6 +197,7 @@ ramips_setup_interfaces()
        pbr-d1|\
        wli-tx4-ag300n|\
        wmr-300|\
+       wn3000rpv3|\
        wrh-300cr)
                ucidef_set_interface_lan "eth0"
                ;;
@@ -212,7 +217,7 @@ ramips_setup_interfaces()
                ;;
        kn_rc|\
        kn_rf)
-               ucidef_add_switch "switch" \
+               ucidef_add_switch "switch0" \
                        "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
                ;;
        kng_rc)
@@ -235,11 +240,8 @@ ramips_setup_interfaces()
                        "0:lan" "4:lan" "6t@eth0"
                ;;
        newifi-d1)
-               ucidef_set_interface_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
-                       "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6t@eth0" "7t@eth0"
-               ucidef_add_switch "switch1" \
-                       "4:lan" "6t@eth0" "7t@eth0"
+               "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
                ;;
        rt-n56u)
                ucidef_add_switch "switch0" \
@@ -262,6 +264,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
                ;;
+       wcr-1166ds)
+               ucidef_add_switch "switch0" \
+                       "3:lan" "4:wan" "6@eth0"
+               ;;
        wcr-150gn)
                ucidef_add_switch "switch0" \
                        "0:lan" "6t@eth0"
@@ -340,13 +346,17 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
-       hc5*61)
+       hc5*61|\
+       hc5661a|\
+       hc5962)
                lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       kn_rc|\
+       kn_rf|\
        kng_rc)
-               wan_mac=$(mtd_get_mac_binary factory 28)
+               wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
        linkits7688 | \
        linkits7688d)
@@ -357,6 +367,10 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory_info 13)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       miwifi-mini)
+               wan_mac=$(cat /sys/class/net/eth0/address)
+               lan_mac=$(macaddr_setbit_la "$wan_mac")
+               ;;
        m3|\
        m4|\
        x5|\
@@ -403,6 +417,12 @@ ramips_setup_macs()
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 5)
                ;;
+       wcr-1166ds|\
+       wsr-1166)
+               local index="$(find_mtd_index "board_data")"
+               wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+               lan_mac=$wan_mac
+               ;;
        wcr-150gn)
                wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
@@ -420,11 +440,6 @@ ramips_setup_macs()
        wlr-6000)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
                ;;
-       wsr-1166)
-               local index="$(find_mtd_index "board_data")"
-               wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
-               lan_mac=$wan_mac
-               ;;
        *)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)