#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-include $(INCLUDE_DIR)/host.mk
DEVICE_VARS += DEVICE_PROFILE IMAGE_SIZE DTB_SIZE
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
endef
+define Build/export-dtb
+ cp $(IMAGE_KERNEL).dtb $@
+endef
+
ifeq ($(SUBTARGET),nand)
define Image/cpiogz
DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k wpad-mini
DEVICE_PROFILE := MR24
DEVICE_DTS := MR24
- BLOCKSIZE := 64512
+ BLOCKSIZE := 63k
IMAGES := sysupgrade.tar
DTB_SIZE := 64512
KERNEL_SIZE := 1984k
MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | \
MerakiNAND
IMAGE/sysupgrade.tar := sysupgrade-tar
+ UBINIZE_OPTS := -E 5
endef
TARGET_DEVICES += mr24
+define Device/mx60
+ DEVICE_TITLE := Cisco Meraki MX60
+ DEVICE_PACKAGES := kmod-spi-gpio swconfig kmod-usb-ledtrig-usbport \
+ kmod-usb-dwc2 kmod-usb-storage block-mount
+ DEVICE_PROFILE := MX60
+ DEVICE_DTS := MX60
+ BLOCKSIZE := 63k
+ IMAGES := sysupgrade.tar
+ DTB_SIZE := 64512
+ # The kernel size will need to match the offset defined in mkmerakifw.c,
+ # otherwise the final image will fail to boot. This is set within the
+ # MX60 kernel header definition which is found at
+ # ./tools/firmware-utils/src/mkmerakifw.c, line 103~
+ KERNEL_SIZE := 2984k
+ IMAGE_SIZE := 1021m
+ KERNEL := kernel-bin | gzip | uImage gzip | MerakiAdd-dtb | MerakiNAND
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | gzip | uImage gzip | \
+ check-size $$(KERNEL_SIZE) | \
+ MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | \
+ MerakiNAND
+ IMAGE/sysupgrade.tar := sysupgrade-tar
+ UBINIZE_OPTS := -E 5
+endef
+TARGET_DEVICES += mx60
+
+define Device/mx60w
+$(Device/mx60)
+ DEVICE_TITLE := Cisco Meraki MX60W
+ DEVICE_PACKAGES += kmod-ath9k wpad-mini
+endef
+TARGET_DEVICES += mx60w
+
define Build/create-uImage-dtb
# flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
@mv $@.new $@
endef
-define Build/append-fakerootfs
- rm -rf $@.fakerootsquashfs $@.fakefs
-
- # append a fake/empty rootfs to fool netgear's uboot
- # CHECK_DNI_FIRMWARE_ROOTFS_INTEGRITY in do_chk_dniimg()
- dd if=/dev/zero of=$@.fakerd bs=16 count=1 conv=sync
-
- -$(STAGING_DIR_HOST)/bin/mkimage \
- -A $(LINUX_KARCH) -O linux -T filesystem -C none \
- -a 0x00000000 -e 0x00000000 \
- -n '$(DEVICE_PROFILE) fakerootfs' \
- -d $@.fakerd $@.fakefs
-
- cat $@.fakefs >> $@
- rm -rf $@.fakerootsquashfs $@.fakefs
-endef
-
define Build/wndr4700-specialImage
rm -rf $@.fakerd $@.new
define Device/WNDR4700
DEVICE_TITLE := Netgear Centria N900 WNDR4700/WNDR4720
DEVICE_PACKAGES := badblocks block-mount e2fsprogs \
- kmod-ath9k kmod-dm kmod-fs-ext4 kmod-fs-vfat kmod-ledtrig-usbdev \
+ kmod-ath9k kmod-dm kmod-fs-ext4 kmod-fs-vfat kmod-usb-ledtrig-usbport \
kmod-md-mod kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-iso8859-15 \
kmod-nls-utf8 kmod-usb3 kmod-usb-dwc2 kmod-usb-storage \
partx-utils swconfig wpad-mini
DEVICE_DTS := wndr4700
PAGESIZE := 2048
SUBPAGESIZE := 512
- BLOCKSIZE := 131072
+ BLOCKSIZE := 128k
DTB_SIZE := 131008
- IMAGE_SIZE:=25559040
- IMAGES := factory.img sysupgrade.tar
+ IMAGE_SIZE := 24960k
+ IMAGES := factory.img sysupgrade.tar kernel.dtb
KERNEL_SIZE := 1920k
- KERNEL := dtb | kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | append-fakerootfs
+ KERNEL := dtb | kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | \
+ append-uImage-fakeroot-hdr
KERNEL_INITRAMFS := kernel-bin | gzip | dtb | wndr4700-specialImage gzip
IMAGE/factory.img := create-uImage-dtb | append-kernel | pad-to 2M | append-ubi | \
netgear-dni | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.tar := sysupgrade-tar
+ IMAGE/kernel.dtb := export-dtb | uImage none
NETGEAR_BOARD_ID := WNDR4700
NETGEAR_HW_ID := 29763875+128+256
+ UBINIZE_OPTS := -E 5
endef
TARGET_DEVICES += WNDR4700
define Build/hdd-img
./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS)
- $(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz)
-endef
-
-define Build/uRamdisk
- $(STAGING_DIR_HOST)/bin/mkimage \
- -A powerpc -T ramdisk -C gzip \
- -n "$(DEVICE_NAME) rootfs" \
- -d $@ $@.new
- mv $@.new $@
-endef
-
-define Build/recovery-tar
- sh ./mbl_gen_recovery_tar.sh \
- --profile $(DEVICE_PROFILE) \
- --dtb $(IMAGE_KERNEL).dtb \
- --dtbname $(DEVICE_DTB) \
- --kernel $(IMAGE_KERNEL) \
- --rootfs $@ \
- $@
-endef
-
-define Build/export-dtb
- cp $(IMAGE_KERNEL).dtb $@
endef
define Device/MyBookLiveDefault
IMAGE_SIZE := 48m
- BLOCKSIZE := 1024
+ BLOCKSIZE := 1k
DTB_SIZE := 16384
KERNEL := kernel-bin | dtb | gzip | uImage gzip
+ KERNEL_INITRAMFS := kernel-bin | dtb | gzip | uImage gzip
BOOT_SIZE := 8
- IMAGES := rootfs.img recovery.tar kernel.dtb
+ IMAGES := rootfs.img kernel.dtb
DEVICE_DTB := apollo3g.dtb
FILESYSTEMS := ext4
IMAGE/kernel.dtb := export-dtb
IMAGE/rootfs.img := boot-script | boot-img | hdd-img
- IMAGE/recovery.tar := append-rootfs | gzip | uRamdisk | recovery-tar
endef
define Device/MyBookLiveSingle
define Device/MyBookLiveDuo
$(Device/MyBookLiveDefault)
DEVICE_TITLE := Western Digital My Book Live Duo
- DEVICE_PACKAGES := kmod-usb-dwc2 kmod-ledtrig-usbdev kmod-usb-storage kmod-fs-vfat wpad-mini
+ DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini
DEVICE_DTS := apollo3g-duo
DEVICE_PROFILE := ap2nc
endef
projects / openwrt / staging / yousong.git / blobdiff