From fec22f8375b4700b331fe8de5dbc511f44057d7f Mon Sep 17 00:00:00 2001 From: John Audia Date: Thu, 20 Jul 2023 05:51:10 -0400 Subject: [PATCH] kernel: bump 6.1 to 6.1.39 Removed upstreamed: generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[1] generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[2] bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch[3] bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch[4] bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch[5] bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[6] bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[7] mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch[8] qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[9] Manually rebased: bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ab0bd172d6289310a05a0cd15e1432e828d386ae 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=6df680709d901346831ef8f221cc90a42062c526 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=5044e5f2511c9afdf9880d2bb6b9d37dfc345dac 4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=e27948f329f7e02591ed1feb9a7710c2ccf89a83 5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=ad2928e7f3f6120a0bd18aa1056b3b24068027c5 6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=2b55a985727833f37c39911f34096b3fdf2a367d 7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=90d4c487cd658b51212eb65ae804ab11af193672 8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=7e3ee25e8c7c7be1eacdfc6d9f5f0e550a2af241 9. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.39&id=b20854ef6c4955be3310975a72f02d92cb01d6d4 Build system: x86/64 Build-tested: x86/64 Run-tested: x86/64 Co-authored-by: Hauke Mehrtens Co-authored-by: Christian Marangi Signed-off-by: John Audia [ rebase bcm27xx and mediatek patches, refresh commit description ] Signed-off-by: Hauke Mehrtens [ minor fixup to bcm27xx patches, refresh commit description ] Signed-off-by: Christian Marangi --- include/kernel-6.1 | 4 +- ...duce-pre_enable_upstream_first-to-al.patch | 308 ------------------ ...epare_upstream_first-flag-to-drm_pan.patch | 39 +-- ...Set-base-to-0-give-expected-gpio-num.patch | 4 +- ...111-MMC-added-alternative-MMC-driver.patch | 6 +- ...trl-bcm2835-Remove-gpiochip-on-error.patch | 2 +- ...vchiq_arm-Add-36-bit-address-support.patch | 10 +- ...q_arm-Usa-a-DMA-pool-for-small-bulks.patch | 2 +- ...2835-Only-return-non-GPIOs-to-inputs.patch | 4 +- ...ilitek9881c-Add-prepare_upstream_fir.patch | 6 +- .../950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch | 27 -- ...ci_sync-Add-fallback-bd-address-prop.patch | 14 +- ...bcm2835-Workaround-for-edge-IRQ-loss.patch | 4 +- ...r-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch | 36 -- ...-Relicense-Rafa-s-code-to-the-GPL-2..patch | 2 +- ...X-Drop-clock-names-from-the-SPI-node.patch | 32 -- ...BCM5301X-fix-duplex-full-full-duplex.patch | 44 --- ...3-10-UPSTREAM-mm-add-vma_has_recency.patch | 2 +- ...dev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch | 35 -- .../generic/hack-6.1/204-module_strip.patch | 12 +- .../780-usb-net-MeigLink_modem_support.patch | 2 +- .../generic/hack-6.1/902-debloat_proc.patch | 2 +- ...ck-usage-in-jffs2_build_xattr_subsys.patch | 121 ------- ...d-knob-for-filtering-rx-tx-BPDU-pack.patch | 2 +- ...freq-mediatek-Add-support-for-MT7988.patch | 6 +- ...-correct-voltages-for-MT7622-and-MT7.patch | 53 --- ...eset-support-resetting-multiple-bits.patch | 59 ---- ...om-Add-support-for-IPQ8074-Gen3-port.patch | 2 +- ...sable-TRIM-on-Micron-MTFC4GACAJCN-1M.patch | 2 +- ...isable-TRIM-on-Kingston-EMMC04G-M627.patch | 2 +- 30 files changed, 65 insertions(+), 779 deletions(-) delete mode 100644 target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch delete mode 100644 target/linux/bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch delete mode 100644 target/linux/bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch delete mode 100644 target/linux/bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch delete mode 100644 target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch delete mode 100644 target/linux/generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch delete mode 100644 target/linux/mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch delete mode 100644 target/linux/qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch diff --git a/include/kernel-6.1 b/include/kernel-6.1 index f844ef1c29..2efadcefc0 100644 --- a/include/kernel-6.1 +++ b/include/kernel-6.1 @@ -1,2 +1,2 @@ -LINUX_VERSION-6.1 = .38 -LINUX_KERNEL_HASH-6.1.38 = f9a4f91b609f7d332a5f2be01ab86336fa00149fae6bdc19f16fa19f78802d43 \ No newline at end of file +LINUX_VERSION-6.1 = .39 +LINUX_KERNEL_HASH-6.1.39 = 4cddee22fdf657138a06af653492f67cd3a4762c04a34725534bd200d99085b8 \ No newline at end of file diff --git a/target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch b/target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch deleted file mode 100644 index bab4ed9b90..0000000000 --- a/target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch +++ /dev/null @@ -1,308 +0,0 @@ -From 5365030a003a6cb0c336202256341e4bc9d65d52 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Thu, 16 Dec 2021 15:25:35 +0000 -Subject: [PATCH] drm/bridge: Introduce pre_enable_upstream_first to - alter bridge init order - -DSI sink devices typically want the DSI host powered up and configured -before they are powered up. pre_enable is the place this would normally -happen, but they are called in reverse order from panel/connector towards -the encoder, which is the "wrong" order. - -Add a new flag pre_enable_upstream_first that any bridge can set -to swap the order of pre_enable (and post_disable) for that and the -immediately upstream bridge. -Should the immediately upstream bridge also set the -pre_enable_upstream_first flag, the bridge upstream of that will be called -before either of those which requested pre_enable_upstream_first. - -eg: -- Panel -- Bridge 1 -- Bridge 2 pre_enable_upstream_first -- Bridge 3 -- Bridge 4 pre_enable_upstream_first -- Bridge 5 pre_enable_upstream_first -- Bridge 6 -- Encoder -Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3, -Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder. - -Signed-off-by: Dave Stevenson ---- - drivers/gpu/drm/drm_bridge.c | 177 +++++++++++++++++++++++++---------- - include/drm/drm_bridge.h | 8 ++ - 2 files changed, 137 insertions(+), 48 deletions(-) - ---- a/drivers/gpu/drm/drm_bridge.c -+++ b/drivers/gpu/drm/drm_bridge.c -@@ -547,20 +547,15 @@ EXPORT_SYMBOL(drm_bridge_chain_disable); - * encoder chain, starting from the first bridge to the last. These are called - * after completing the encoder's prepare op. - * -+ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that -+ * bridge will be called before the previous one to reverse the @pre_enable -+ * calling direction. -+ * - * Note: the bridge passed should be the one closest to the encoder - */ - void drm_bridge_chain_post_disable(struct drm_bridge *bridge) - { -- struct drm_encoder *encoder; -- -- if (!bridge) -- return; -- -- encoder = bridge->encoder; -- list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) { -- if (bridge->funcs->post_disable) -- bridge->funcs->post_disable(bridge); -- } -+ drm_atomic_bridge_chain_post_disable(bridge, NULL); - } - EXPORT_SYMBOL(drm_bridge_chain_post_disable); - -@@ -602,24 +597,14 @@ EXPORT_SYMBOL(drm_bridge_chain_mode_set) - * chain, starting from the last bridge to the first. These are called - * before calling the encoder's commit op. - * -+ * If a bridge sets @pre_enable_upstream_first, then the @pre_enable for the -+ * previous bridge will be called before @pre_enable of this bridge. -+ * - * Note: the bridge passed should be the one closest to the encoder - */ - void drm_bridge_chain_pre_enable(struct drm_bridge *bridge) - { -- struct drm_encoder *encoder; -- struct drm_bridge *iter; -- -- if (!bridge) -- return; -- -- encoder = bridge->encoder; -- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) { -- if (iter->funcs->pre_enable) -- iter->funcs->pre_enable(iter); -- -- if (iter == bridge) -- break; -- } -+ drm_atomic_bridge_chain_pre_enable(bridge, NULL); - } - EXPORT_SYMBOL(drm_bridge_chain_pre_enable); - -@@ -691,6 +676,25 @@ void drm_atomic_bridge_chain_disable(str - } - EXPORT_SYMBOL(drm_atomic_bridge_chain_disable); - -+static void drm_atomic_bridge_call_post_disable(struct drm_bridge *bridge, -+ struct drm_atomic_state *old_state) -+{ -+ if (old_state && bridge->funcs->atomic_post_disable) { -+ struct drm_bridge_state *old_bridge_state; -+ -+ old_bridge_state = -+ drm_atomic_get_old_bridge_state(old_state, -+ bridge); -+ if (WARN_ON(!old_bridge_state)) -+ return; -+ -+ bridge->funcs->atomic_post_disable(bridge, -+ old_bridge_state); -+ } else if (bridge->funcs->post_disable) { -+ bridge->funcs->post_disable(bridge); -+ } -+} -+ - /** - * drm_atomic_bridge_chain_post_disable - cleans up after disabling all bridges - * in the encoder chain -@@ -701,6 +705,9 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_di - * &drm_bridge_funcs.post_disable) op for all the bridges in the encoder chain, - * starting from the first bridge to the last. These are called after completing - * &drm_encoder_helper_funcs.atomic_disable -+ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that -+ * bridge will be called before the previous one to reverse the @pre_enable -+ * calling direction. - * - * Note: the bridge passed should be the one closest to the encoder - */ -@@ -708,30 +715,75 @@ void drm_atomic_bridge_chain_post_disabl - struct drm_atomic_state *old_state) - { - struct drm_encoder *encoder; -+ struct drm_bridge *next, *limit; - - if (!bridge) - return; - - encoder = bridge->encoder; -+ - list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) { -- if (bridge->funcs->atomic_post_disable) { -- struct drm_bridge_state *old_bridge_state; -+ limit = NULL; - -- old_bridge_state = -- drm_atomic_get_old_bridge_state(old_state, -- bridge); -- if (WARN_ON(!old_bridge_state)) -- return; -+ if (!list_is_last(&bridge->chain_node, &encoder->bridge_chain)) { -+ next = list_next_entry(bridge, chain_node); - -- bridge->funcs->atomic_post_disable(bridge, -- old_bridge_state); -- } else if (bridge->funcs->post_disable) { -- bridge->funcs->post_disable(bridge); -+ if (next->pre_enable_upstream_first) { -+ /* Downstream bridge had requested that upstream -+ * was enabled first, so disabled last -+ */ -+ limit = next; -+ -+ /* Find the next bridge that has NOT requested -+ * upstream to be enabled first / disabled last -+ */ -+ list_for_each_entry_from(next, &encoder->bridge_chain, -+ chain_node) { -+ if (next->pre_enable_upstream_first) { -+ next = list_prev_entry(next, chain_node); -+ limit = next; -+ break; -+ } -+ } -+ -+ /* Call these bridges in reverse order */ -+ list_for_each_entry_from_reverse(next, &encoder->bridge_chain, -+ chain_node) { -+ if (next == bridge) -+ break; -+ -+ drm_atomic_bridge_call_post_disable(next, -+ old_state); -+ } -+ } - } -+ -+ drm_atomic_bridge_call_post_disable(bridge, old_state); -+ -+ if (limit) -+ bridge = limit; - } - } - EXPORT_SYMBOL(drm_atomic_bridge_chain_post_disable); - -+static void drm_atomic_bridge_call_pre_enable(struct drm_bridge *bridge, -+ struct drm_atomic_state *old_state) -+{ -+ if (old_state && bridge->funcs->atomic_pre_enable) { -+ struct drm_bridge_state *old_bridge_state; -+ -+ old_bridge_state = -+ drm_atomic_get_old_bridge_state(old_state, -+ bridge); -+ if (WARN_ON(!old_bridge_state)) -+ return; -+ -+ bridge->funcs->atomic_pre_enable(bridge, old_bridge_state); -+ } else if (bridge->funcs->pre_enable) { -+ bridge->funcs->pre_enable(bridge); -+ } -+} -+ - /** - * drm_atomic_bridge_chain_pre_enable - prepares for enabling all bridges in - * the encoder chain -@@ -743,33 +795,62 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_po - * starting from the last bridge to the first. These are called before calling - * &drm_encoder_helper_funcs.atomic_enable - * -+ * If a bridge sets @pre_enable_upstream_first, then the pre_enable for the -+ * upstream bridge will be called before pre_enable of this bridge. -+ * - * Note: the bridge passed should be the one closest to the encoder - */ - void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge, - struct drm_atomic_state *old_state) - { - struct drm_encoder *encoder; -- struct drm_bridge *iter; -+ struct drm_bridge *iter, *next, *limit; - - if (!bridge) - return; - - encoder = bridge->encoder; -- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) { -- if (iter->funcs->atomic_pre_enable) { -- struct drm_bridge_state *old_bridge_state; - -- old_bridge_state = -- drm_atomic_get_old_bridge_state(old_state, -- iter); -- if (WARN_ON(!old_bridge_state)) -- return; -+ list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) { -+ if (iter->pre_enable_upstream_first) { -+ next = iter; -+ limit = bridge; -+ list_for_each_entry_from_reverse(next, -+ &encoder->bridge_chain, -+ chain_node) { -+ if (next == bridge) -+ break; -+ -+ if (!next->pre_enable_upstream_first) { -+ /* Found first bridge that does NOT -+ * request upstream to be enabled first -+ */ -+ limit = list_prev_entry(next, chain_node); -+ break; -+ } -+ } -+ -+ list_for_each_entry_from(next, &encoder->bridge_chain, chain_node) { -+ /* Call requested upstream bridge pre_enable -+ * in order. -+ */ -+ if (next == iter) -+ /* At the first bridgge to request upstream -+ * bridges called first. -+ */ -+ break; - -- iter->funcs->atomic_pre_enable(iter, old_bridge_state); -- } else if (iter->funcs->pre_enable) { -- iter->funcs->pre_enable(iter); -+ drm_atomic_bridge_call_pre_enable(next, old_state); -+ } - } - -+ drm_atomic_bridge_call_pre_enable(iter, old_state); -+ -+ if (iter->pre_enable_upstream_first) -+ /* Jump all bridges that we have already pre_enabled -+ */ -+ iter = limit; -+ - if (iter == bridge) - break; - } ---- a/include/drm/drm_bridge.h -+++ b/include/drm/drm_bridge.h -@@ -769,6 +769,14 @@ struct drm_bridge { - */ - bool interlace_allowed; - /** -+ * @pre_enable_upstream_first: The bridge requires that the upstream -+ * bridge @pre_enable function is called before its @pre_enable, -+ * and conversely for post_disable. This is most frequently a -+ * requirement for DSI devices which need the host to be initialised -+ * before the peripheral. -+ */ -+ bool pre_enable_upstream_first; -+ /** - * @ddc: Associated I2C adapter for DDC access, if any. - */ - struct i2c_adapter *ddc; diff --git a/target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch b/target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch index 6ca65ab3f3..1e54e61301 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch @@ -1,32 +1,33 @@ -From 9ac3eedd8cda7d5f2429edc0bdba137c35e07157 Mon Sep 17 00:00:00 2001 +From 5ea6b17027810ffbdb5bea7d0a2b1d312dd1021c Mon Sep 17 00:00:00 2001 From: Dave Stevenson -Date: Wed, 23 Feb 2022 15:36:56 +0000 -Subject: [PATCH] drm/panel: Add prepare_upstream_first flag to - drm_panel +Date: Mon, 5 Dec 2022 17:33:27 +0000 +Subject: [PATCH] drm/panel: Add prepare_prev_first flag to drm_panel -Mapping to the drm_bridge flag pre_enable_upstream_first, -add a new flag prepare_upstream_first to drm_panel to allow +Mapping to the drm_bridge flag pre_enable_prev_first, +add a new flag prepare_prev_first to drm_panel to allow the panel driver to request that the upstream bridge should be pre_enabled before the panel prepare. Signed-off-by: Dave Stevenson +Reviewed-by: Dmitry Baryshkov +Link: https://lore.kernel.org/r/20221205173328.1395350-6-dave.stevenson@raspberrypi.com +Signed-off-by: Maxime Ripard --- - drivers/gpu/drm/bridge/panel.c | 3 +++ + drivers/gpu/drm/bridge/panel.c | 2 ++ include/drm/drm_panel.h | 10 ++++++++++ - 2 files changed, 13 insertions(+) + 2 files changed, 12 insertions(+) --- a/drivers/gpu/drm/bridge/panel.c +++ b/drivers/gpu/drm/bridge/panel.c -@@ -258,6 +258,9 @@ struct drm_bridge *drm_panel_bridge_add_ - panel_bridge->bridge.ops = DRM_BRIDGE_OP_MODES; - panel_bridge->bridge.type = connector_type; +@@ -368,6 +368,8 @@ struct drm_bridge *devm_drm_panel_bridge + devres_free(ptr); + } -+ panel_bridge->bridge.pre_enable_upstream_first = -+ panel->prepare_upstream_first; ++ bridge->pre_enable_prev_first = panel->prepare_prev_first; + - drm_bridge_add(&panel_bridge->bridge); - - return &panel_bridge->bridge; + return bridge; + } + EXPORT_SYMBOL(devm_drm_panel_bridge_add_typed); --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -196,6 +196,16 @@ struct drm_panel { @@ -35,14 +36,14 @@ Signed-off-by: Dave Stevenson struct list_head list; + + /** -+ * @prepare_upstream_first: ++ * @prepare_prev_first: + * -+ * The upstream controller should be prepared first, before the prepare ++ * The previous controller should be prepared first, before the prepare + * for the panel is called. This is largely required for DSI panels + * where the DSI host controller should be initialised to LP-11 before + * the panel is powered up. + */ -+ bool prepare_upstream_first; ++ bool prepare_prev_first; }; void drm_panel_init(struct drm_panel *panel, struct device *dev, diff --git a/target/linux/bcm27xx/patches-6.1/950-0104-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch b/target/linux/bcm27xx/patches-6.1/950-0104-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch index b988136486..5ef7bf624b 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0104-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0104-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch @@ -20,7 +20,7 @@ Signed-off-by: Phil Elwell --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -393,7 +393,7 @@ static const struct gpio_chip bcm2835_gp +@@ -391,7 +391,7 @@ static const struct gpio_chip bcm2835_gp .get = bcm2835_gpio_get, .set = bcm2835_gpio_set, .set_config = gpiochip_generic_config, @@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell .ngpio = BCM2835_NUM_GPIOS, .can_sleep = false, .of_gpio_ranges_fallback = bcm2835_of_gpio_ranges_fallback, -@@ -410,7 +410,7 @@ static const struct gpio_chip bcm2711_gp +@@ -408,7 +408,7 @@ static const struct gpio_chip bcm2711_gp .get = bcm2835_gpio_get, .set = bcm2835_gpio_set, .set_config = gpiochip_generic_config, diff --git a/target/linux/bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch b/target/linux/bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch index 0e14805d5b..ace12078da 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch @@ -325,7 +325,7 @@ Signed-off-by: Phil Elwell } --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h -@@ -106,6 +106,14 @@ static const struct mmc_fixup __maybe_un +@@ -129,6 +129,14 @@ static const struct mmc_fixup __maybe_un MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd, MMC_QUIRK_BROKEN_SD_DISCARD), @@ -2007,9 +2007,9 @@ Signed-off-by: Phil Elwell sdhci_dumpregs(host); --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h -@@ -295,6 +295,8 @@ struct mmc_card { - #define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */ +@@ -296,6 +296,8 @@ struct mmc_card { #define MMC_QUIRK_BROKEN_SD_DISCARD (1<<14) /* Disable broken SD discard support */ + #define MMC_QUIRK_BROKEN_SD_CACHE (1<<15) /* Disable broken SD cache support */ +#define MMC_QUIRK_ERASE_BROKEN (1<<31) /* Skip erase */ + diff --git a/target/linux/bcm27xx/patches-6.1/950-0218-pinctrl-bcm2835-Remove-gpiochip-on-error.patch b/target/linux/bcm27xx/patches-6.1/950-0218-pinctrl-bcm2835-Remove-gpiochip-on-error.patch index 1c4dd22402..d44742982c 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0218-pinctrl-bcm2835-Remove-gpiochip-on-error.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0218-pinctrl-bcm2835-Remove-gpiochip-on-error.patch @@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -1357,7 +1357,7 @@ static int bcm2835_pinctrl_probe(struct +@@ -1355,7 +1355,7 @@ static int bcm2835_pinctrl_probe(struct girq->default_type = IRQ_TYPE_NONE; girq->handler = handle_level_irq; diff --git a/target/linux/bcm27xx/patches-6.1/950-0328-staging-vchiq_arm-Add-36-bit-address-support.patch b/target/linux/bcm27xx/patches-6.1/950-0328-staging-vchiq_arm-Add-36-bit-address-support.patch index 5ecd2d357d..a9e9991d1a 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0328-staging-vchiq_arm-Add-36-bit-address-support.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0328-staging-vchiq_arm-Add-36-bit-address-support.patch @@ -158,14 +158,14 @@ Signed-off-by: Phil Elwell pagelistinfo->scatterlist_mapped = 0; @@ -468,6 +515,7 @@ free_pagelist(struct vchiq_instance *ins - int vchiq_platform_init(struct platform_device *pdev, struct vchiq_state *state) + static int vchiq_platform_init(struct platform_device *pdev, struct vchiq_state *state) { struct device *dev = &pdev->dev; + struct device *dma_dev = NULL; struct vchiq_drvdata *drvdata = platform_get_drvdata(pdev); struct rpi_firmware *fw = drvdata->fw; struct vchiq_slot_zero *vchiq_slot_zero; -@@ -489,6 +537,24 @@ int vchiq_platform_init(struct platform_ +@@ -489,6 +537,24 @@ static int vchiq_platform_init(struct pl g_cache_line_size = drvdata->cache_line_size; g_fragments_size = 2 * g_cache_line_size; @@ -190,7 +190,7 @@ Signed-off-by: Phil Elwell /* Allocate space for the channels in coherent memory */ slot_mem_size = PAGE_ALIGN(TOTAL_SLOTS * VCHIQ_SLOT_SIZE); frag_mem_size = PAGE_ALIGN(g_fragments_size * MAX_FRAGMENTS); -@@ -501,13 +567,14 @@ int vchiq_platform_init(struct platform_ +@@ -501,13 +567,14 @@ static int vchiq_platform_init(struct pl } WARN_ON(((unsigned long)slot_mem & (PAGE_SIZE - 1)) != 0); @@ -206,7 +206,7 @@ Signed-off-by: Phil Elwell vchiq_slot_zero->platform_data[VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX] = MAX_FRAGMENTS; -@@ -541,7 +608,6 @@ int vchiq_platform_init(struct platform_ +@@ -541,7 +608,6 @@ static int vchiq_platform_init(struct pl } /* Send the base address of the slots to VideoCore */ @@ -214,7 +214,7 @@ Signed-off-by: Phil Elwell err = rpi_firmware_property(fw, RPI_FIRMWARE_VCHIQ_INIT, &channelbase, sizeof(channelbase)); if (err || channelbase) { -@@ -549,6 +615,8 @@ int vchiq_platform_init(struct platform_ +@@ -549,6 +615,8 @@ static int vchiq_platform_init(struct pl return err ? : -ENXIO; } diff --git a/target/linux/bcm27xx/patches-6.1/950-0330-staging-vchiq_arm-Usa-a-DMA-pool-for-small-bulks.patch b/target/linux/bcm27xx/patches-6.1/950-0330-staging-vchiq_arm-Usa-a-DMA-pool-for-small-bulks.patch index b4f99d04ca..0f0f247480 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0330-staging-vchiq_arm-Usa-a-DMA-pool-for-small-bulks.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0330-staging-vchiq_arm-Usa-a-DMA-pool-for-small-bulks.patch @@ -102,7 +102,7 @@ Signed-off-by: Oliver Gjoneski pagelistinfo->dma_dir = (type == PAGELIST_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; pagelistinfo->num_pages = num_pages; -@@ -616,6 +634,13 @@ int vchiq_platform_init(struct platform_ +@@ -616,6 +634,13 @@ static int vchiq_platform_init(struct pl } g_dma_dev = dma_dev ?: dev; diff --git a/target/linux/bcm27xx/patches-6.1/950-0402-pinctrl-bcm2835-Only-return-non-GPIOs-to-inputs.patch b/target/linux/bcm27xx/patches-6.1/950-0402-pinctrl-bcm2835-Only-return-non-GPIOs-to-inputs.patch index 449406193a..bd199b76e2 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0402-pinctrl-bcm2835-Only-return-non-GPIOs-to-inputs.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0402-pinctrl-bcm2835-Only-return-non-GPIOs-to-inputs.patch @@ -13,7 +13,7 @@ Signed-off-by: Phil Elwell --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -928,9 +928,12 @@ static int bcm2835_pmx_free(struct pinct +@@ -926,9 +926,12 @@ static int bcm2835_pmx_free(struct pinct unsigned offset) { struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); @@ -28,7 +28,7 @@ Signed-off-by: Phil Elwell return 0; } -@@ -972,10 +975,7 @@ static void bcm2835_pmx_gpio_disable_fre +@@ -970,10 +973,7 @@ static void bcm2835_pmx_gpio_disable_fre struct pinctrl_gpio_range *range, unsigned offset) { diff --git a/target/linux/bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch b/target/linux/bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch index 53373f6b5c..ce66c7d2ee 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0404-drm-panel-panel-ilitek9881c-Add-prepare_upstream_fir.patch @@ -2,12 +2,12 @@ From 942d55434af46aebe8f5508995807253a6b235b3 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Thu, 31 Mar 2022 12:05:04 +0100 Subject: [PATCH] drm/panel: panel-ilitek9881c: Add - prepare_upstream_first flag + prepare_prev_first flag The panel sends MIPI DCS commands during prepare and is expecting the bus to remain in LP-11 state in-between. -Set the prepare_upstream_first flag so that the upstream DSI host +Set the prepare_prev_first flag so that the upstream DSI host is prepared / pre_enabled first, and therefore the bus is in a defined state. @@ -22,7 +22,7 @@ Signed-off-by: Dave Stevenson ctx->dsi = dsi; ctx->desc = of_device_get_match_data(&dsi->dev); -+ ctx->panel.prepare_upstream_first = true; ++ ctx->panel.prepare_prev_first = true; drm_panel_init(&ctx->panel, &dsi->dev, &ili9881c_funcs, DRM_MODE_CONNECTOR_DSI); diff --git a/target/linux/bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch b/target/linux/bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch deleted file mode 100644 index 1758d3e162..0000000000 --- a/target/linux/bcm27xx/patches-6.1/950-0439-nvmem-Use-NVMEM_DEVID_AUTO.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 10fcafcad54e1d055b6b67881a5b52b95dbd2da3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 7 Oct 2022 10:38:31 +0100 -Subject: [PATCH] nvmem: Use NVMEM_DEVID_AUTO - -It is reasonable to declare multiple nvmem blocks. Unless a unique 'id' -is passed in for each block there may be name clashes. - -Avoid this by using the magic token NVMEM_DEVID_AUTO. - -Fixes: 5a3fa75a4d9cb ("nvmem: Add driver to expose reserved memory as nvmem") - -Signed-off-by: Phil Elwell ---- - drivers/nvmem/rmem.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/nvmem/rmem.c -+++ b/drivers/nvmem/rmem.c -@@ -71,6 +71,7 @@ static int rmem_probe(struct platform_de - config.dev = dev; - config.priv = priv; - config.name = "rmem"; -+ config.id = NVMEM_DEVID_AUTO; - config.size = mem->size; - config.reg_read = rmem_read; - diff --git a/target/linux/bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch b/target/linux/bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch index 6fd82ce011..fd84781729 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0699-Bluetooth-hci_sync-Add-fallback-bd-address-prop.patch @@ -31,11 +31,11 @@ Signed-off-by: Phil Elwell @@ -4568,7 +4569,9 @@ static int hci_dev_setup_sync(struct hci if (!ret) { - if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) { -- if (!bacmp(&hdev->public_addr, BDADDR_ANY)) -+ if (!bacmp(&hdev->public_addr, BDADDR_ANY) && -+ (invalid_bdaddr || -+ !fwnode_property_present(fwnode, "fallback-bd-address"))) - hci_dev_get_bd_addr_from_property(hdev); + if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks) && +- !bacmp(&hdev->public_addr, BDADDR_ANY)) ++ !bacmp(&hdev->public_addr, BDADDR_ANY) && ++ (invalid_bdaddr || ++ !fwnode_property_present(fwnode, "fallback-bd-address"))) + hci_dev_get_bd_addr_from_property(hdev); - if (bacmp(&hdev->public_addr, BDADDR_ANY) && + if ((invalid_bdaddr || diff --git a/target/linux/bcm27xx/patches-6.1/950-0704-pinctrl-bcm2835-Workaround-for-edge-IRQ-loss.patch b/target/linux/bcm27xx/patches-6.1/950-0704-pinctrl-bcm2835-Workaround-for-edge-IRQ-loss.patch index 65345f480e..16028b897c 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0704-pinctrl-bcm2835-Workaround-for-edge-IRQ-loss.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0704-pinctrl-bcm2835-Workaround-for-edge-IRQ-loss.patch @@ -19,7 +19,7 @@ Signed-off-by: Phil Elwell --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -422,15 +422,32 @@ static void bcm2835_gpio_irq_handle_bank +@@ -420,15 +420,32 @@ static void bcm2835_gpio_irq_handle_bank unsigned long events; unsigned offset; unsigned gpio; @@ -52,7 +52,7 @@ Signed-off-by: Phil Elwell } static void bcm2835_gpio_irq_handler(struct irq_desc *desc) -@@ -670,11 +687,7 @@ static int bcm2835_gpio_irq_set_type(str +@@ -668,11 +685,7 @@ static int bcm2835_gpio_irq_set_type(str static void bcm2835_gpio_irq_ack(struct irq_data *data) { diff --git a/target/linux/bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch b/target/linux/bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch deleted file mode 100644 index ff56aacc7c..0000000000 --- a/target/linux/bcm4908/patches-6.1/040-mtd-parsers-refer-to-ARCH_BCMBCA-instead-of-ARCH_BCM.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 085679b15b5af65f9610f619afde41da0f966194 Mon Sep 17 00:00:00 2001 -From: Lukas Bulwahn -Date: Wed, 16 Nov 2022 13:49:32 +0100 -Subject: [PATCH] mtd: parsers: refer to ARCH_BCMBCA instead of ARCH_BCM4908 - -Commit dd5c672d7ca9 ("arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA") -removes config ARCH_BCM4908 as config ARCH_BCMBCA has the same intent. - -Probably due to concurrent development, commit 002181f5b150 ("mtd: parsers: -add Broadcom's U-Boot parser") introduces 'Broadcom's U-Boot partition -parser' that depends on ARCH_BCM4908, but this use was not visible during -the config refactoring from the commit above. Hence, these two changes -create a reference to a non-existing config symbol. - -Adjust the MTD_BRCM_U_BOOT definition to refer to ARCH_BCMBCA instead of -ARCH_BCM4908 to remove the reference to the non-existing config symbol -ARCH_BCM4908. - -Signed-off-by: Lukas Bulwahn -Signed-off-by: Miquel Raynal -Link: https://lore.kernel.org/linux-mtd/20221116124932.4748-1-lukas.bulwahn@gmail.com ---- - drivers/mtd/parsers/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/parsers/Kconfig -+++ b/drivers/mtd/parsers/Kconfig -@@ -22,7 +22,7 @@ config MTD_BCM63XX_PARTS - - config MTD_BRCM_U_BOOT - tristate "Broadcom's U-Boot partition parser" -- depends on ARCH_BCM4908 || COMPILE_TEST -+ depends on ARCH_BCMBCA || COMPILE_TEST - help - Broadcom uses a custom way of storing U-Boot environment variables. - They are placed inside U-Boot partition itself at unspecified offset. diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch index 43a9d0aa1b..4744e6d5b1 100644 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch +++ b/target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch @@ -460,7 +460,7 @@ Signed-off-by: Florian Fainelli }; }; -@@ -558,24 +390,4 @@ +@@ -557,24 +389,4 @@ }; }; }; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch deleted file mode 100644 index 4065db8366..0000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch +++ /dev/null @@ -1,32 +0,0 @@ -From d3c8e2c5757153bbfad70019ec1decbca86f3def Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 3 May 2023 14:28:30 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Drop "clock-names" from the SPI node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -There is no such property in the SPI controller binding documentation. -Also Linux driver doesn't look for it. - -This fixes: -arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: spi@18029200: Unevaluated properties are not allowed ('clock-names' was unexpected) - From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230503122830.3200-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm5301x.dtsi | 1 - - 1 file changed, 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -335,7 +335,6 @@ - "spi_lr_session_done", - "spi_lr_overread"; - clocks = <&iprocmed>; -- clock-names = "iprocmed"; - num-cs = <2>; - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch b/target/linux/bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch deleted file mode 100644 index 805dcf54eb..0000000000 --- a/target/linux/bcm53xx/patches-6.1/031-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch +++ /dev/null @@ -1,44 +0,0 @@ -From fd274b733bfdde3ca72f0fa2a37f032f3a8c402c Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 8 Jun 2023 17:36:29 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: fix duplex-full => full-duplex - -this typo was found by the dtbs_check -| ports:port@5:fixed-link: 'oneOf' conditional failed, -| {'speed': [[1000]], 'duplex-full': True} is not of type 'array' -| 'duplex-full' does not match any of the regexes: 'pinctrl-[0-]..." - -this should have been full-duplex; - -Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") -Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") -Signed-off-by: Christian Lamparter -Link: https://lore.kernel.org/r/50522f45566951a9eabd22820647924cc6b4a264.1686238550.git.chunkeey@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 +- - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts -@@ -121,7 +121,7 @@ - - fixed-link { - speed = <1000>; -- duplex-full; -+ full-duplex; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -182,7 +182,7 @@ - - fixed-link { - speed = <1000>; -- duplex-full; -+ full-duplex; - }; - }; - }; diff --git a/target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch b/target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch index 6907862905..8fd5564d00 100644 --- a/target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch +++ b/target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch @@ -87,7 +87,7 @@ Signed-off-by: T.J. Mercier mark_page_accessed(page); } rss[mm_counter(page)]--; -@@ -5182,8 +5181,8 @@ static inline void mm_account_fault(stru +@@ -5189,8 +5188,8 @@ static inline void mm_account_fault(stru #ifdef CONFIG_LRU_GEN static void lru_gen_enter_fault(struct vm_area_struct *vma) { diff --git a/target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch b/target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch deleted file mode 100644 index 3385023168..0000000000 --- a/target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch +++ /dev/null @@ -1,35 +0,0 @@ -From cee4bd16c3195a701be683f7da9e88c6e11acb73 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 19 Apr 2023 23:07:39 +0200 -Subject: [PATCH 1/5] leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on - dev rename - -Dev can be renamed also while up for supported device. We currently -wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME -event. - -Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and -correctly set the NETDEV_LED_MODE_LINKUP bit. - -Fixes: 5f820ed52371 ("leds: trigger: netdev: fix handling on interface rename") -Cc: stable@vger.kernel.org # v5.5+ -Signed-off-by: Christian Marangi -Reviewed-by: Andrew Lunn -Signed-off-by: Lee Jones -Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com ---- - drivers/leds/trigger/ledtrig-netdev.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/leds/trigger/ledtrig-netdev.c -+++ b/drivers/leds/trigger/ledtrig-netdev.c -@@ -318,6 +318,9 @@ static int netdev_trig_notify(struct not - clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); - switch (evt) { - case NETDEV_CHANGENAME: -+ if (netif_carrier_ok(dev)) -+ set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); -+ fallthrough; - case NETDEV_REGISTER: - if (trigger_data->net_dev) - dev_put(trigger_data->net_dev); diff --git a/target/linux/generic/hack-6.1/204-module_strip.patch b/target/linux/generic/hack-6.1/204-module_strip.patch index f0949d32fd..71ee62ece8 100644 --- a/target/linux/generic/hack-6.1/204-module_strip.patch +++ b/target/linux/generic/hack-6.1/204-module_strip.patch @@ -141,7 +141,7 @@ Signed-off-by: Felix Fietkau --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c -@@ -1817,7 +1817,9 @@ static void read_symbols(const char *mod +@@ -1781,7 +1781,9 @@ static void read_symbols(const char *mod symname = remove_dot(info.strtab + sym->st_name); handle_symbol(mod, &info, sym, symname); @@ -151,7 +151,7 @@ Signed-off-by: Felix Fietkau } for (sym = info.symtab_start; sym < info.symtab_stop; sym++) { -@@ -1980,8 +1982,10 @@ static void add_header(struct buffer *b, +@@ -1944,8 +1946,10 @@ static void add_header(struct buffer *b, buf_printf(b, "BUILD_SALT;\n"); buf_printf(b, "BUILD_LTO_INFO;\n"); buf_printf(b, "\n"); @@ -162,7 +162,7 @@ Signed-off-by: Felix Fietkau buf_printf(b, "\n"); buf_printf(b, "__visible struct module __this_module\n"); buf_printf(b, "__section(\".gnu.linkonce.this_module\") = {\n"); -@@ -1995,8 +1999,10 @@ static void add_header(struct buffer *b, +@@ -1959,8 +1963,10 @@ static void add_header(struct buffer *b, buf_printf(b, "\t.arch = MODULE_ARCH_INIT,\n"); buf_printf(b, "};\n"); @@ -173,7 +173,7 @@ Signed-off-by: Felix Fietkau buf_printf(b, "\n" -@@ -2004,8 +2010,10 @@ static void add_header(struct buffer *b, +@@ -1968,8 +1974,10 @@ static void add_header(struct buffer *b, "MODULE_INFO(retpoline, \"Y\");\n" "#endif\n"); @@ -184,7 +184,7 @@ Signed-off-by: Felix Fietkau if (strstarts(mod->name, "tools/testing")) buf_printf(b, "\nMODULE_INFO(test, \"Y\");\n"); -@@ -2101,11 +2109,13 @@ static void add_depends(struct buffer *b +@@ -2065,11 +2073,13 @@ static void add_depends(struct buffer *b static void add_srcversion(struct buffer *b, struct module *mod) { @@ -198,7 +198,7 @@ Signed-off-by: Felix Fietkau } static void write_buf(struct buffer *b, const char *fname) -@@ -2191,7 +2201,9 @@ static void write_mod_c_file(struct modu +@@ -2155,7 +2165,9 @@ static void write_mod_c_file(struct modu add_exported_symbols(&buf, mod); add_versions(&buf, mod); add_depends(&buf, mod); diff --git a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch b/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch index 7257f7010b..64241c4801 100644 --- a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch +++ b/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch @@ -29,7 +29,7 @@ Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support #define QUECTEL_VENDOR_ID 0x2c7c /* These Quectel products use Quectel's vendor ID */ -@@ -1173,6 +1175,11 @@ static const struct usb_device_id option +@@ -1177,6 +1179,11 @@ static const struct usb_device_id option .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, diff --git a/target/linux/generic/hack-6.1/902-debloat_proc.patch b/target/linux/generic/hack-6.1/902-debloat_proc.patch index 5722ac97b1..b035f04ba2 100644 --- a/target/linux/generic/hack-6.1/902-debloat_proc.patch +++ b/target/linux/generic/hack-6.1/902-debloat_proc.patch @@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau --- a/net/core/sock.c +++ b/net/core/sock.c -@@ -4082,6 +4082,8 @@ static __net_initdata struct pernet_oper +@@ -4093,6 +4093,8 @@ static __net_initdata struct pernet_oper static int __init proto_init(void) { diff --git a/target/linux/generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch b/target/linux/generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch deleted file mode 100644 index e5a86dd29f..0000000000 --- a/target/linux/generic/pending-6.1/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch +++ /dev/null @@ -1,121 +0,0 @@ -From eee53f6eb7561f516b9c4bac829ce31c48096130 Mon Sep 17 00:00:00 2001 -From: Fabian Frederick -Date: Tue, 9 May 2017 22:30:03 +0200 -Subject: [PATCH] jffs2: reduce stack usage in jffs2_build_xattr_subsystem() - -Use kcalloc() for allocation/flush of 128 pointers table to -reduce stack usage. - -Function now returns -ENOMEM or 0 on success. - -stackusage -Before: -./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 1208 -dynamic,bounded - -After: -./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 192 -dynamic,bounded - -Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled - -Tested with an MTD mount point and some user set/getfattr. - -Many current target on OpenWRT also suffer from a compilation warning -(that become an error with CONFIG_WERROR) with the following output: - -fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem': -fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] - 887 | } - | ^ - -Using dynamic allocation fix this compilation warning. - -Fixes: c9f700f840bd ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion") -Reported-by: Tim Gardner -Reported-by: kernel test robot -Reported-by: Ron Economos -Reported-by: Nathan Chancellor -Reviewed-by: Nick Desaulniers -Signed-off-by: Fabian Frederick -Signed-off-by: Christian Marangi -Cc: stable@vger.kernel.org ---- - fs/jffs2/build.c | 5 ++++- - fs/jffs2/xattr.c | 13 +++++++++---- - fs/jffs2/xattr.h | 4 ++-- - 3 files changed, 15 insertions(+), 7 deletions(-) - ---- a/fs/jffs2/build.c -+++ b/fs/jffs2/build.c -@@ -211,7 +211,10 @@ static int jffs2_build_filesystem(struct - ic->scan_dents = NULL; - cond_resched(); - } -- jffs2_build_xattr_subsystem(c); -+ ret = jffs2_build_xattr_subsystem(c); -+ if (ret) -+ goto exit; -+ - c->flags &= ~JFFS2_SB_FLAG_BUILDING; - - dbg_fsbuild("FS build complete\n"); ---- a/fs/jffs2/xattr.c -+++ b/fs/jffs2/xattr.c -@@ -772,10 +772,10 @@ void jffs2_clear_xattr_subsystem(struct - } - - #define XREF_TMPHASH_SIZE (128) --void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c) -+int jffs2_build_xattr_subsystem(struct jffs2_sb_info *c) - { - struct jffs2_xattr_ref *ref, *_ref; -- struct jffs2_xattr_ref *xref_tmphash[XREF_TMPHASH_SIZE]; -+ struct jffs2_xattr_ref **xref_tmphash; - struct jffs2_xattr_datum *xd, *_xd; - struct jffs2_inode_cache *ic; - struct jffs2_raw_node_ref *raw; -@@ -784,9 +784,12 @@ void jffs2_build_xattr_subsystem(struct - - BUG_ON(!(c->flags & JFFS2_SB_FLAG_BUILDING)); - -+ xref_tmphash = kcalloc(XREF_TMPHASH_SIZE, -+ sizeof(struct jffs2_xattr_ref *), GFP_KERNEL); -+ if (!xref_tmphash) -+ return -ENOMEM; -+ - /* Phase.1 : Merge same xref */ -- for (i=0; i < XREF_TMPHASH_SIZE; i++) -- xref_tmphash[i] = NULL; - for (ref=c->xref_temp; ref; ref=_ref) { - struct jffs2_xattr_ref *tmp; - -@@ -884,6 +887,8 @@ void jffs2_build_xattr_subsystem(struct - "%u of xref (%u dead, %u orphan) found.\n", - xdatum_count, xdatum_unchecked_count, xdatum_orphan_count, - xref_count, xref_dead_count, xref_orphan_count); -+ kfree(xref_tmphash); -+ return 0; - } - - struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c, ---- a/fs/jffs2/xattr.h -+++ b/fs/jffs2/xattr.h -@@ -71,7 +71,7 @@ static inline int is_xattr_ref_dead(stru - #ifdef CONFIG_JFFS2_FS_XATTR - - extern void jffs2_init_xattr_subsystem(struct jffs2_sb_info *c); --extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c); -+extern int jffs2_build_xattr_subsystem(struct jffs2_sb_info *c); - extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c); - - extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c, -@@ -103,7 +103,7 @@ extern ssize_t jffs2_listxattr(struct de - #else - - #define jffs2_init_xattr_subsystem(c) --#define jffs2_build_xattr_subsystem(c) -+#define jffs2_build_xattr_subsystem(c) (0) - #define jffs2_clear_xattr_subsystem(c) - - #define jffs2_xattr_do_crccheck_inode(c, ic) diff --git a/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch b/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch index 7eb3d8653f..4c09ed6b50 100644 --- a/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch +++ b/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch @@ -161,7 +161,7 @@ Signed-off-by: Felix Fietkau struct rtnl_link { rtnl_doit_func doit; -@@ -4817,7 +4817,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu +@@ -4823,7 +4823,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu brport_nla_put_flag(skb, flags, mask, IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) || brport_nla_put_flag(skb, flags, mask, diff --git a/target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch b/target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch index 6acd3d607f..49cd62d0ae 100644 --- a/target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch +++ b/target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch @@ -15,7 +15,7 @@ Signed-off-by: Sam Shih --- a/drivers/cpufreq/mediatek-cpufreq.c +++ b/drivers/cpufreq/mediatek-cpufreq.c -@@ -702,6 +702,15 @@ static const struct mtk_cpufreq_platform +@@ -709,6 +709,15 @@ static const struct mtk_cpufreq_platform .ccifreq_supported = false, }; @@ -31,10 +31,10 @@ Signed-off-by: Sam Shih static const struct mtk_cpufreq_platform_data mt8183_platform_data = { .min_volt_shift = 100000, .max_volt_shift = 200000, -@@ -735,6 +744,7 @@ static const struct of_device_id mtk_cpu +@@ -742,6 +751,7 @@ static const struct of_device_id mtk_cpu { .compatible = "mediatek,mt2712", .data = &mt2701_platform_data }, { .compatible = "mediatek,mt7622", .data = &mt7622_platform_data }, - { .compatible = "mediatek,mt7623", .data = &mt7622_platform_data }, + { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data }, + { .compatible = "mediatek,mt7988", .data = &mt7988_platform_data }, { .compatible = "mediatek,mt8167", .data = &mt8516_platform_data }, { .compatible = "mediatek,mt817x", .data = &mt2701_platform_data }, diff --git a/target/linux/mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch b/target/linux/mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch deleted file mode 100644 index 6ab05b897c..0000000000 --- a/target/linux/mediatek/patches-6.1/351-cpufreq-mediatek-correct-voltages-for-MT7622-and-MT7.patch +++ /dev/null @@ -1,53 +0,0 @@ -From e7697814c142c99f470c3458d49e41b25a575f23 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 26 May 2023 10:31:40 +0100 -Subject: [PATCH] cpufreq: mediatek: correct voltages for MT7622 and MT7623 - -The MT6380 regulator typically used together with MT7622 does not -support the current maximum processor and SRAM voltage in the cpufreq -driver (1360000uV). -For MT7622 limit processor and SRAM supply voltages to 1350000uV to -avoid having the tracking algorithm request unsupported voltages from -the regulator. - -On MT7623 there is no separate SRAM supply and the maximum voltage used -is 1300000uV. Create dedicated platform data for MT7623 to cover that -case as well. - -Fixes: 0883426fd07e3 ("cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623") -Suggested-by: Jia-wei Chang -Signed-off-by: Daniel Golle ---- - drivers/cpufreq/mediatek-cpufreq.c | 13 ++++++++++--- - 1 file changed, 10 insertions(+), 3 deletions(-) - ---- a/drivers/cpufreq/mediatek-cpufreq.c -+++ b/drivers/cpufreq/mediatek-cpufreq.c -@@ -696,9 +696,16 @@ static const struct mtk_cpufreq_platform - static const struct mtk_cpufreq_platform_data mt7622_platform_data = { - .min_volt_shift = 100000, - .max_volt_shift = 200000, -- .proc_max_volt = 1360000, -+ .proc_max_volt = 1350000, - .sram_min_volt = 0, -- .sram_max_volt = 1360000, -+ .sram_max_volt = 1350000, -+ .ccifreq_supported = false, -+}; -+ -+static const struct mtk_cpufreq_platform_data mt7623_platform_data = { -+ .min_volt_shift = 100000, -+ .max_volt_shift = 200000, -+ .proc_max_volt = 1300000, - .ccifreq_supported = false, - }; - -@@ -743,7 +750,7 @@ static const struct of_device_id mtk_cpu - { .compatible = "mediatek,mt2701", .data = &mt2701_platform_data }, - { .compatible = "mediatek,mt2712", .data = &mt2701_platform_data }, - { .compatible = "mediatek,mt7622", .data = &mt7622_platform_data }, -- { .compatible = "mediatek,mt7623", .data = &mt7622_platform_data }, -+ { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data }, - { .compatible = "mediatek,mt7988", .data = &mt7988_platform_data }, - { .compatible = "mediatek,mt8167", .data = &mt8516_platform_data }, - { .compatible = "mediatek,mt817x", .data = &mt2701_platform_data }, diff --git a/target/linux/qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch b/target/linux/qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch deleted file mode 100644 index e0725a6612..0000000000 --- a/target/linux/qualcommax/patches-6.1/0008-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 813ba3e427671ba3ff35c825087b03f0ad91cf02 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 7 Nov 2022 14:28:59 +0100 -Subject: [PATCH] clk: qcom: reset: support resetting multiple bits - -This patch adds the support for giving the complete bitmask -in reset structure and reset operation will use this bitmask -for all reset operations. - -Currently, reset structure only takes a single bit for each reset -and then calculates the bitmask by using the BIT() macro. - -However, this is not sufficient anymore for newer SoC-s like IPQ8074, -IPQ6018 and more, since their networking resets require multiple bits -to be asserted in order to properly reset the HW block completely. - -So, in order to allow asserting multiple bits add "bitmask" field to -qcom_reset_map, and then use that bitmask value if its populated in the -driver, if its not populated, then we just default to existing behaviour -and calculate the bitmask on the fly. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com ---- - drivers/clk/qcom/reset.c | 4 ++-- - drivers/clk/qcom/reset.h | 1 + - 2 files changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/clk/qcom/reset.c -+++ b/drivers/clk/qcom/reset.c -@@ -30,7 +30,7 @@ qcom_reset_assert(struct reset_controlle - - rst = to_qcom_reset_controller(rcdev); - map = &rst->reset_map[id]; -- mask = BIT(map->bit); -+ mask = map->bitmask ? map->bitmask : BIT(map->bit); - - return regmap_update_bits(rst->regmap, map->reg, mask, mask); - } -@@ -44,7 +44,7 @@ qcom_reset_deassert(struct reset_control - - rst = to_qcom_reset_controller(rcdev); - map = &rst->reset_map[id]; -- mask = BIT(map->bit); -+ mask = map->bitmask ? map->bitmask : BIT(map->bit); - - return regmap_update_bits(rst->regmap, map->reg, mask, 0); - } ---- a/drivers/clk/qcom/reset.h -+++ b/drivers/clk/qcom/reset.h -@@ -12,6 +12,7 @@ struct qcom_reset_map { - unsigned int reg; - u8 bit; - u8 udelay; -+ u32 bitmask; - }; - - struct regmap; diff --git a/target/linux/qualcommax/patches-6.1/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/qualcommax/patches-6.1/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch index 60caee46ca..3d5c2182e9 100644 --- a/target/linux/qualcommax/patches-6.1/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch +++ b/target/linux/qualcommax/patches-6.1/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch @@ -16,7 +16,7 @@ Signed-off-by: Bjorn Helgaas --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -1745,6 +1745,7 @@ static const struct of_device_id qcom_pc +@@ -1762,6 +1762,7 @@ static const struct of_device_id qcom_pc { .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 }, { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, diff --git a/target/linux/qualcommax/patches-6.1/0132-mmc-core-disable-TRIM-on-Micron-MTFC4GACAJCN-1M.patch b/target/linux/qualcommax/patches-6.1/0132-mmc-core-disable-TRIM-on-Micron-MTFC4GACAJCN-1M.patch index 8c2e59eeb4..0da71f1b09 100644 --- a/target/linux/qualcommax/patches-6.1/0132-mmc-core-disable-TRIM-on-Micron-MTFC4GACAJCN-1M.patch +++ b/target/linux/qualcommax/patches-6.1/0132-mmc-core-disable-TRIM-on-Micron-MTFC4GACAJCN-1M.patch @@ -20,7 +20,7 @@ Signed-off-by: Robert Marko --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h -@@ -101,6 +101,13 @@ static const struct mmc_fixup __maybe_un +@@ -124,6 +124,13 @@ static const struct mmc_fixup __maybe_un MMC_QUIRK_TRIM_BROKEN), /* diff --git a/target/linux/qualcommax/patches-6.1/0133-mmc-core-disable-TRIM-on-Kingston-EMMC04G-M627.patch b/target/linux/qualcommax/patches-6.1/0133-mmc-core-disable-TRIM-on-Kingston-EMMC04G-M627.patch index ac7af52a74..cc6f29e38e 100644 --- a/target/linux/qualcommax/patches-6.1/0133-mmc-core-disable-TRIM-on-Kingston-EMMC04G-M627.patch +++ b/target/linux/qualcommax/patches-6.1/0133-mmc-core-disable-TRIM-on-Kingston-EMMC04G-M627.patch @@ -22,7 +22,7 @@ Signed-off-by: Robert Marko --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h -@@ -108,6 +108,13 @@ static const struct mmc_fixup __maybe_un +@@ -131,6 +131,13 @@ static const struct mmc_fixup __maybe_un MMC_QUIRK_TRIM_BROKEN), /* -- 2.30.2