John Audia [Wed, 20 Dec 2023 18:32:41 +0000 (13:32 -0500)]
kernel: bump 6.1 to 6.1.69
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69
Removed upstreamed:
generic/backport-6.1/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1]
generic/backport-6.1/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2]
generic/backport-6.1/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3]
generic/backport-6.1/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4]
generic/backport-6.1/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
893597cbabfbc00ee51fd5f73e2028994f49ded6
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
1d82735f4bae954d5ba004994b96baec791f874f
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
4c2ad8e39c62c5288ca31ebf5c30e34f3bd9d044
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
325556d46bfd13a2fa0d304d0625be86821fd683
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
cac1218b32d7b56832dd36f7baf82f123f305a2a
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 20 Dec 2023 18:54:11 +0000 (13:54 -0500)]
kernel: bump 5.15 to 5.15.144
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.144
Removed upstreamed:
generic/backport-5.15/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1]
generic/backport-5.15/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2]
generic/backport-5.15/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3]
generic/backport-5.15/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4]
generic/backport-5.15/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
ca75274b17b890e6f6d2951e364360e25f2846e9
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
07ba21627ebbb2c68c357e8d698166c45078d014
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
aa3cc80e8edaa6098b58eb4a613d765496c2dfca
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
4c117984824b4a852a0e0765e5bdea0f1c7d6309
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
404ce6ee69d384096663e3f6987d915090447835
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Tianling Shen [Mon, 18 Dec 2023 02:54:17 +0000 (10:54 +0800)]
arm-trusted-firmware-sunxi: Update to 2.10
Runtime tested on NanoPi R1S H5 and Orange Pi Zero3.
Changelog: https://trustedfirmware-a.readthedocs.io/en/v2.10/change-log.html
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Felix Fietkau [Tue, 19 Dec 2023 21:35:11 +0000 (22:35 +0100)]
netifd: update to Git HEAD (2023-12-19)
a2d32f0dcf16 Revert "system-linux: set pending to 0 on ifindex found or error for if_get_master"
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Tianling Shen [Mon, 18 Dec 2023 03:12:38 +0000 (11:12 +0800)]
sunxi: mark upstreamed patches as such
Also sort them to start from 001.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 17 Dec 2023 11:49:08 +0000 (19:49 +0800)]
sunxi: remove outdated kernel 5.15 files
We're on 6.1 now, these files can go.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Fri, 15 Dec 2023 10:32:18 +0000 (18:32 +0800)]
linux-firmware: update to
20231211
06fa7dd2 cxgb4: Update firmware to revision 1.27.4.0
fd44bdae amdgpu: DMCUB updates for various AMDGPU asics
7ed62638 Revert "rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225"
42d31f8f rtl_bt: Add firmware v2 file for RTL8852C
0ab353f8 Merge branch 'for-upstream' of http://git.chelsio.net/pub/git/linux-firmware
f2eb058a linux-firmware: Update AMD cpu microcode
980373f5 cirrus: Add CS35L41 firmware for HP G11 models
789aa815 amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2
ae80f1f1 Revert "amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2"
6c089c10 amdgpu: DMCUB updates for various AMDGPU asics
0e048b06 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
5eeda20d amdgpu: DMCUB updates for various AMDGPU asics
81caac98 i915: add GSC 102.0.0.1655 for MTL
ca49c8cf rtw89: 8851b: update fw to v0.29.41.2
ef41ae8f rtw89: 8852b: update fw to v0.29.29.3
a33f8f1a amdgpu: update DMCUB to 0.0.181.0 for various AMDGPU ASICs
97e88a0d linux-firmware: Update AMD SEV firmware
d0172b89 linux-firmware: update firmware for qat_4xxx devices
50da38ee Merge branch 'mtl_gsc_1655' of git://anongit.freedesktop.org/drm/drm-firmware
fc45c425 linux-firmware: Update firmware file for Intel Bluetooth AX201
3892dc01 linux-firmware: Update firmware file for Intel Bluetooth AX200
606a17b1 linux-firmware: Update firmware file for Intel Bluetooth AX210
55545299 linux-firmware: Update firmware file for Intel Bluetooth AX211
904880ad linux-firmware: Update firmware file for Intel Bluetooth AX211
e6c09397 linux-firmware: Update firmware file for Intel Bluetooth AX203
51e9ea58 linux-firmware: Update firmware file for Intel Bluetooth AX203
58773db5 Merge https://github.com/pkshih/linux-firmware
2bad80e7 copy-firmware: Support additional compressor options
db99828b copy-firmware: Introduce 'RawFile' keyword
becc678d Merge tag 'amd-2023-08-18' of https://gitlab.freedesktop.org/drm/firmware
659dfe64 Merge tag 'amd-2023-08-25' of https://gitlab.freedesktop.org/drm/firmware
49f9e347 i915: Update MTL DMC to v2.16
8e1fe1bd Merge branch 'dmc-mtl_2.16' of git://anongit.freedesktop.org/drm/drm-firmware
27fb2f63 check_whence: reformat using python black
c442a500 Add pre-commit hooks and codespell template
5e2367f8 Wire up pre-commit to `make check`
408eb34a Rewrite README in markdown
5ebb5914 Merge branch 'mlimonci/update-ci' into 'main'
792115b2 Add Dockerfile used to build CI image
69e68cde Add gitlab ci for calling pre-commit and ci-fairy
b2f03c84 Add a rule for automatic tagging releases by pipeline schedule
c79933a8 Fix carl9170fw shell scripts for shellcheck errors
8976d8c3 Add shellcheck pre-commit target
1edd2d6f QCA: Update Bluetooth WCN685x 2.1 firmware to 2.1.0-00605
61501389 Merge branch 'mlimonci/enable-pre-commit-ci' into 'main'
6c097314 Merge branch 'mlimonci/shellcheck' into 'main'
3e79f6b8 Create symlinks for all firmware that is duplicate using rdfind
bcc397d6 Add new toplevel 'make dist' target.
f12059b7 Capture artifacts from `make dist` to save at release time.
d5c485f9 Only run ci-fairy on merge requests
bb4f6589 Merge branch 'mlimonci/skip-ci-fairy-for-main' into 'main'
c57a9388 Merge https://github.com/tjiang1234/btfw-wcn6855-605
80de4d8a check_whence: Recognize RawFile keyword
c6ce6ac0 WHENCE: amd-ucode: Use new RawFile keyword
e805619f WHENCE: Don't compress qcom json files
7d8f2d95 Merge branch 'RawFile' into 'main'
a0142c57 ath10k/WCN3990: move wlanmdsp to qcom/sdm845
fe85b0c7 Merge branch 'qcom' into 'main'
20d250e3 Merge branch 'mlimonci/make-dist' into 'main'
9f3ec3a8 qcom: add GPU firmware for QCM2290 / QRB2210
a32c8568 qcom: add firmware for QCM2290 platforms
89659cb9 qcom: add firmware for QRB4210 platforms
106ff9f9 qcom: add venus firmware files for v6.0
74cc8ca8 qcom: add firmware for the onboard WiFi on qcm2290 / qrb4210
1346f922 qcom: sm8250: update DSP firmware
adeabfda qcom: Update vpu-1.0 firmware
bb3d5bc9 qcom: sm8250: add RB5 sensors DSP firmware
7d94e0fa linux-firmware: add link to sc8280xp audioreach firmware
ad03b851 Merge branch 'rb12-fw-v2' into 'main'
28935de4 Merge branch 'rb5-update' of https://github.com/lumag/linux-firmware into rb5-update
473be1c4 Merge branch 'rb5-update' into 'main'
60458657 Merge branch 'sc8280xp-audio-fw-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/srini/linux-firmware into sc8280xp-audio-fw-fixes
cb926295 Merge branch 'sc8280xp-audio-fw-fixes' into 'main'
c801b3b8 Turn off textwidth check
dfa11466 Merge branch 'main' into 'main'
2bbca647 amdgpu: update DMCUB to 0.0.183.0 for various AMDGPU ASICs
a5dbe400 i915: update MTL HuC to version 8.5.4
3a9bcf45 Merge branch 'main' into 'main'
d252e92d linux-firmware: amd-ucode: Add note on fam19h warnings
3a07aa51 Merge branch 'amd-ucode' into 'main'
3786ca8f Merge branch 'mtl_huc_8.5.4' of git://anongit.freedesktop.org/drm/drm-firmware into mtl_huc
919300d1 Merge branch 'mtl_huc' into 'main'
f48da6da Run merge request pipelines for pre-commit.
3672ccab Merge branch 'mlimonci/fix-merge-requests-ci' into 'main'
08532e36 iwlwifi: update cc/Qu/QuZ firmwares for core81-65 release
765492b8 iwlwifi: add new FWs from core81-65 release
29b47c59 Merge branch 'main' into 'main'
addc3392 rtl_bt: Update RTL8851B BT USB firmware to 0x048A_D230
1ed8d8bf linux-firmware: Update FW files for MRVL PCIE 8997 chipsets
7d1f06ab Merge branch 'rtl_bt' into 'main'
74830f66 Merge branch 'mrvl' into 'main'
328beacb amd_pmf: Add initial PMF TA for Smart PC Solution Builder
8b855f37 Merge branch 'main' into 'main'
a6744df8 iwlwifi: add FWs for new GL and MA device types with multiple RF modules
1c285c0a amdgpu: update aldebaran firmware from 5.7 branch
f9366fa1 amdgpu: update GC 11.0.3 firmware from 5.7 branch
b21bd580 amdgpu: update PSP 13.0.10 firmware from 5.7 branch
5a99cd50 amdgpu: update SMU 13.0.10 firmware from 5.7 branch
abe39de3 amdgpu: update raven2 firmware from 5.7 branch
7f027004 amdgpu: update navi10 firmware from 5.7 branch
c25d0ef6 amdgpu: update yellow carp firmware from 5.7 branch
aa67101a amdgpu: update GC 11.0.2 firmware from 5.7 branch
22ca16ee amdgpu: update PSP 13.0.7 firmware from 5.7 branch
a3b30e39 amdgpu: update SDMA 6.0.2 firmware from 5.7 branch
971fe4bd amdgpu: update SMU 13.0.7 firmware from 5.7 branch
fd688e37 amdgpu: update VCN 4.0.4 firmware from 5.7 branch
17a48ca2 amdgpu: update navi12 firmware from 5.7 branch
d850220b amdgpu: update renoir firmware from 5.7 branch
fcf92700 amdgpu: update navi14 firmware from 5.7 branch
a34604d3 amdgpu: update GC 11.0.1 firmware from 5.7 branch
7b785ce1 amdgpu: update PSP 13.0.4 firmware from 5.7 branch
ab618fa5 amdgpu: update SDMA 6.0.1 firmware from 5.7 branch
4ee8dc91 amdgpu: update GC 11.0.4 firmware from 5.7 branch
c09f4219 amdgpu: update PSP 13.0.11 firmware from 5.7 branch
b828f43c amdgpu: update sienna cichlid firmware from 5.7 branch
f8f3d52e amdgpu: update green sardine firmware from 5.7 branch
7d8a4a06 amdgpu: update vangogh firmware from 5.7 branch
e6a3c06e amdgpu: update navy flounder firmware from 5.7 branch
5e40e6c2 amdgpu: update picasso firmware from 5.7 branch
51637156 amdgpu: update dimgrey cavefish firmware from 5.7 branch
08e23f2c amdgpu: update vega10 firmware from 5.7 branch
050fe578 amdgpu: update vega12 firmware from 5.7 branch
ee81c65c amdgpu: update beige goby firmware from 5.7 branch
0923446e amdgpu: update vega20 firmware from 5.7 branch
c321aeee amdgpu: update GC 11.0.0 firmware from 5.7 branch
7baff8dd amdgpu: update PSP 13.0.0 firmware from 5.7 branch
9973966a amdgpu: update SDMA 6.0.0 firmware from 5.7 branch
af3d18b3 amdgpu: update SMU 13.0.0 firmware from 5.7 branch
b65ac01b amdgpu: update VCN 4.0.0 firmware from 5.7 branch
a92f8f21 amdgpu: update GC 10.3.6 firmware from 5.7 branch
fc627e98 amdgpu: update PSP 13.0.5 firmware from 5.7 branch
f5b7964e amdgpu: update SDMA 5.2.6 firmware from 5.7 branch
5837f76c amdgpu: update DCN 3.1.6 firmware from 5.7 branch
35d98aaf amdgpu: update GC 10.3.7 firmware from 5.7 branch
8ba97109 amdgpu: update PSP 13.0.8 firmware from 5.7 branch
75e5b634 amdgpu: update SDMA 5.2.7 firmware from 5.7 branch
95ec6f69 amdgpu: update raven firmware from 5.7 branch
18b60f44 i915: Update MTL DMC to v2.17
cef80743 Add new Makefile target to build a deb and rpm package
ce33c671 Build debian and fedora images
312b5d8a Merge branch 'iwlwifi-fw-2023-09-27' into 'main'
957828e1 linux-firmware: Update firmware file for Intel Bluetooth 9260
717c1a5d linux-firmware: Update firmware file for Intel Bluetooth 9560
a3e18aff linux-firmware: Update firmware file for Intel Bluetooth AX210
3fed6fb8 linux-firmware: Update firmware file for Intel Bluetooth AX211
3ce0e06b linux-firmware: Update firmware file for Intel Bluetooth AX211
8c1e8c66 linux-firmware: Update firmware file for Intel Bluetooth AX201
bbf94191 linux-firmware: Update firmware file for Intel Bluetooth AX201
ab0c0a78 linux-firmware: Add firmware file for Intel Bluetooth AX211
2316c3d0 Merge branch 'intel-bt-
20231004' into 'main'
58b8d3f3 Merge branch 'dmc-mtl_2.17' of git://anongit.freedesktop.org/drm/drm-firmware into dmc-mtl
8e57de05 Merge branch 'dmc-mtl' into 'main'
5105ff4b Merge branch 'mlimonci/upstream-packaging' into 'main'
389575a8 WHENCE: add symlink for BananaPi M64
7727f7e3 Merge branch 'patch-
1696561325' into 'main'
92e24e04 iwlwifi: add a missing FW from core80-39 release
44a9510c i915: Add GuC v70.13.1 for DG2, TGL, ADL-P and MTL
1be48f85 Merge branch 'pr-24-
1697222431' into 'main'
4d619071 Add a script for a robot to open up pull requests
0da49b90 linux-firmware: add Amlogic bluetooth firmware
63e8aa40 Merge branch 'main' into 'main'
a3bcbbf2 amdgpu: update SMU 13.0.0 firmware
8ff933de Merge branch 'robot/pr-0-
1697570762' into 'main'
f893135f Merge branch 'robot/pr-0-
1697658135' into 'main'
ecaeef5d Add support for sending emails while processing a PR/patch
29e9aa86 Merge branch 'mlimonci/robot' into 'main'
06afd7f9 linux-firmware: Update AMD cpu microcode
1115cf5c Merge branch 'robot/patch-0-
1697735493' into 'main'
6ed75465 Fix the robot email script
d983107a Merge branch 'mlimonci/fix-email' into 'main'
7bfa5f4d Catch unicode decode errors
3de241ed rtl_nic: update firmware of RTL8156B
39d55392 Use `git am` instead of `b4 shazam`
ad84593d Merge branch 'robot/patch-23-
1698074268' into 'main'
5f560c1e Merge branch 'mlimonci/unicode' into 'main'
4ee01756 Merge branch 'mlimonci/use-am' into 'main'
b22703ca Disable deb and rpm CI other than at release
80703e05 Merge branch 'mlimonci/less-ci' into 'main'
37761e2b Intel Bluetooth: Update firmware file for Intel Bluetooth BE200
dd6368d9 Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX211
fabc67bf Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX201
581a25e6 Intel Bluetooth: Update firmware file for Intel Bluetooth AX203
bc0b7dfa Intel Bluetooth: Update firmware file for Intel Bluetooth AX203
2ceaa29d Merge branch 'core80' into 'main'
dcec764d Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX101
1962446e Intel Bluetooth: Update firmware file for Intel Bluetooth AX210
4c092813 Intel Bluetooth: Update firmware file for Intel Bluetooth AX211
59aaeac9 Intel Bluetooth: Update firmware file for Intel Bluetooth AX211
2b304bfe Merge branch 'main' into 'main'
02df6e4f rtw89: 8851b: update fw to v0.29.41.3
7a916315 rtw89: 8852b: update fw to v0.29.29.4
2afd1423 rtw89: 8852b: update fw to v0.29.29.5
1ba9408e linux-firmware: ixp4xx: Add the IXP4xx firmware
411938ad Merge branch 'mlimonci/rtw89' into 'main'
185e84b8 Merge branch 'ixp4xx' into 'main'
724c77e5 qca: add bluetooth firmware for WCN3988
19342f15 Merge branch 'apbtfw' into 'main'
65a89b16 amdgpu: DMCUB updates for various AMDGPU ASICs
df98199f Merge tag 'amd-2023-11-03'
9a3bf241 Merge branch 'main' into 'main'
9a170370 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210
cdecf243 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211
be41333c Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211
34600f06 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203
8563348b Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203
ed34505f Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211
92faee69 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203
19c3c023 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101
a5a6dded Intel Bluetooth: Update firmware file for Intel Bluetooth BE200
2340796d Merge branch 'main' into 'main'
f4a3c72e nvidia: add GSP-RM version 535.113.01 firmware images
16b92b8d Merge branch 'mlimonci/nvidia-gsp-rm-535' into 'main'
cc8a7d10 Fix classification of some pull requests
4c55675d Fix symlink creation for some files
195eae59 Add checks for destination directory being specified
cf8315de Ensure rdfind is installed
b79f31cf Merge branch 'mlimonci/fix-symlinks' into 'main'
1ee89a11 Merge branch 'mlimonci/robot-fix' into 'main'
c57c8384 amdgpu: DMCUB updates for various AMDGPU ASICs
1737b581 Merge tag 'amd-2023-11-10' into amd-2023-11-10
74158e7a Merge branch 'amd-2023-11-10' into 'main'
bf5150dd Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210
80a378a2 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211
b021ad7c Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211
bfc7dbe7 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203
4eb64f9b Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203
c7c5ca39 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX101
80907d76 Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX101
8b5a4168 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211
5e40b6aa Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203
307a4e50 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101
6910095b linux-firmware: add firmware for mt7988 internal 2.5G ethernet phy
bd4df953 Merge branch 'main' into 'main'
398b4605 Merge branch 'robot/patch-0-
1699862686' into 'main'
1f8f61d5 Process pull requets directly from mbox
05ac293b Add extra debugging output when processing pull requests
d011ba69 Add a workaround for gitlab.freedesktop.org pull requests
b72eeb60 Merge branch 'mlimonci/robot-pr-improvements' into 'main'
978dff67 linux-firmware: Add firmware for Cirrus CS35L41 on 2024 ASUS Zenbook Laptops
4f498d09 linux-firmware: Add firmware for Cirrus CS35L41 on HP G11 Laptops
4fc5801e iwlwifi: update cc/Qu/QuZ firmwares for core83-55 release
a07fd0b9 iwlwifi: add new FWs from core83-55 release
124b6639 Merge branch 'robot/pr-0-
1700068965' into 'main'
9009038b Enable deb and rpm builds on tags
f27dec61 iwlwifi: fix for the new FWs from core83-55 release
58ec4325 Merge branch 'mlimonci/release-packages' into 'main'
8228c222 Try both utf-8 and windows-1252 for decoding email
b486a13b Merge branch 'robot/pr-17-
1700153404' into 'main'
6723a8d9 Merge branch 'robot/pr-5-
1700153542' into 'main'
bfd5f0b9 Make email replies more resilient
45109014 i915: Update MTL DMC to v2.19
f81145a0 Merge branch 'robot/pr-0-
1700234575' into 'main'
7124ce30 Merge branch 'mlimonci/encoding' into 'main'
c03db704 amdgpu: update DMCUB firmware to 0.0.193.0 for DCN31 and DCN314
ba1aa06f Intel Bluetooth: Update firmware file for Intel Bluetooth BE200
a41fa7c5 mediatek: Sync shared memory structure changes
c3ce13b3 Merge branch 'main' into 'main'
9552083a Merge branch 'robot/pr-0-
1700470117' into 'main'
0c211dbe Merge branch 'amd-staging' into 'main'
5e9fdab5 mediatek: Remove an unused packed library
bef5a36d Merge branch 'robot/patch-1-
1700555775' into 'main'
47582844 ice: update ice DDP package to 1.3.35.0
0628ba79 ice: update ice DDP comms package to 1.3.45.0
ad0bbae4 Merge branch 'robot/patch-1-
1700674626' into 'main'
a5539dc1 Merge branch 'robot/patch-2-
1700674629' into 'main'
9afbbf25 powervr: add firmware for Imagination Technologies AXE-1-16M GPU
fad38ab8 Merge branch 'powervr-2023-11-23' into 'main'
ea682fba qcom: update Venus firmware file for v6.0
18f56bf3 qcom: update qcm2290/qrb4210 WiFi firmware file
0bba2c99 qcom: update qcm2290 firmware
6cfedcbb qcom: update qrb4210 firmware
87427f23 amdgpu: update DMCUB firmware to 0.0.194.0 for DCN321 and DCN32
f6d61ded Merge branch 'robot/pr-0-
1700887115' into 'main'
c6823ce2 Makefile, copy-firmware: Use portable "command -v" to detect installed programs
9fdcf639 Merge branch 'robot/patch-0-
1701018572' into 'main'
0a18a729 linux-firmware: update firmware for MT7921 WiFi device
6b91b2ef linux-firmware: update firmware for MT7922 WiFi device
cc44f3b8 Merge branch 'mt7921-wifi' into 'main'
1366b827 linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
5955de2f Merge branch 'mt7922-wifi' into 'main'
1180974e linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
351f0c67 Merge branch 'mt7921-bt' into 'main'
f440b984 ice: update ice DDP wireless_edge package to 1.3.13.0
adbdc241 Merge branch 'mt7922-bt' into 'main'
f8c611e7 Merge branch 'ice-edge' into 'main'
4124f8f9 Make rdfind optional
4fab4e51 Merge branch 'rdfind-opt' into 'main'
98eed92e rtl_bt: Update RTL8852A BT USB firmware to 0xDFC8_145F
5aadb590 Merge branch 'robot/patch-0-
1701175489' into 'main'
d9f6088f Add a COPYOPTS variable
aae60524 Merge branch 'make-opts' into 'main'
37db2a09 s5p-mfc: Add MFC v12 Firmware
034e24b8 Merge branch 's5p-mfc-v12' into 'main'
ddc99b3d linux-firmware: add firmware for en8811h 2.5G ethernet phy
dbf82492 cxgb4: Update firmware to revision 1.27.5.0
129e07d9 Merge branch 'robot/pr-0-
1701358064' into 'main'
f63dd70d Merge branch 'robot/patch-0-
1701352637' into 'main'
b9d971b9 Merge branch 'rb12-update' into 'main'
bfc33c1e linux-firmware: Update AMD cpu microcode
c004dbee Merge branch 'robot/patch-0-
1701808157' into 'main'
23feb609 wfx: fix broken firmware
1505c948 wfx: update to firmware 3.17
f2e52a1c Merge branch 'wfx' into 'main'
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
John Audia [Wed, 13 Dec 2023 20:54:50 +0000 (15:54 -0500)]
kernel: bump 5.15 to 5.15.143
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.143
Removed upstreamed:
generic/backport-5.15/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1]
Manually rebased:
mediatek/patches-5.15/100-dts-update-mt7622-rfb1.patch
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.143&id=
00beca907a7be61da935bb687f9601420fc5f8a8
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 13 Dec 2023 19:52:38 +0000 (14:52 -0500)]
kernel: bump 6.1 to 6.1.68
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68
Removed upstreamed:
generic/backport-6.1/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1]
Manually rebased:
mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.68&id=
3759e735562a31e44fee825498f05c06e64b25a8
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Felix Fietkau [Tue, 19 Dec 2023 09:53:41 +0000 (10:53 +0100)]
toolchain/gdb: add pthread to CFLAGS/LDFLAGS for zstd
Works around a build issue when building on a host with an older glibc,
where it would fail to detect ELF support in libbfd
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Mon, 18 Dec 2023 21:22:12 +0000 (21:22 +0000)]
mvebu: fix RTC of IEI-World Puzzle M90x devices
The Puzzle devices come with an I2C-connected Epson RX8130 RTC.
Disable the (dysfunctional) RTC units of the SoC and add driver
kmod-rtc-ds1307 to support the Epson RX8130 instead.
Tested-by: Thomas Huehn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 18 Dec 2023 17:54:55 +0000 (18:54 +0100)]
mt76: update to Git HEAD (2023-12-18)
bebd9cffc2ae wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Mon, 18 Dec 2023 00:43:49 +0000 (01:43 +0100)]
tools/cmake: update to 3.28.1
Release Notes:
https://www.kitware.com/cmake-3-28-1-available-for-download/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Felix Fietkau [Mon, 18 Dec 2023 10:48:59 +0000 (11:48 +0100)]
netifd: update to Git HEAD (2023-12-18)
730b4656e6b1 netifd: fix undefined va_list value which can cause crashes
c59457f69709 device: Log error message if device initialization failed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 12 Nov 2023 21:20:41 +0000 (22:20 +0100)]
toolchain/gdb: export ZSTD_CFLAGS/LIBS to fix build on non-linux systems
Avoids picking up libs and header files from musl
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Sun, 17 Dec 2023 21:35:13 +0000 (22:35 +0100)]
kernel: backport NVMEM changes queued for v6.8
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sun, 17 Dec 2023 20:23:44 +0000 (21:23 +0100)]
kernel: backport upstream brcm_nvram fix for NAND controller
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Sander Vanheule [Sun, 17 Dec 2023 18:36:24 +0000 (19:36 +0100)]
firmware-utils: update to git HEAD
Adds two changes improving compatibility with supported TP-Link devices.
5e14973d2199 tplink-safeloader: add Archer A6 v2 (RU)
d87b6c4b6423 tplink-safeloader: bump EAP615-Wall compat_level
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Sander Vanheule [Sun, 17 Dec 2023 16:42:28 +0000 (17:42 +0100)]
tools: firmware-utils: update to git HEAD
Adds two changes improving compatibility with supported TP-Link devices.
5e14973d2199 tplink-safeloader: add Archer A6 v2 (RU)
d87b6c4b6423 tplink-safeloader: bump EAP615-Wall compat_level
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Christian Marangi [Sun, 17 Dec 2023 16:35:18 +0000 (17:35 +0100)]
netifd: update to Git HEAD (2023-12-17)
66a7652176a7 system-linux: set pending to 0 on ifindex found or error for if_get_master
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Thibaut VARÈNE [Mon, 11 Dec 2023 14:23:03 +0000 (15:23 +0100)]
dnsmasq: invert logic for "localuse"
Prior to this commit, "localuse" (which enables local resolving through
dnsmsasq) was off by "default". That default was in turn overridden when
"noresolv" was unset (which itself is the default for "noresolv") *and*
"resolvfile" was "/tmp/resolv.conf.d/resolv.conf.auto" (also the default
for this parameter).
In other words, the "default" unset value for "localuse" would only be
ever used in specific *non-default* configurations.
However, the problem with that logic is that a user who wants to ignore
their ISP-provided resolvers by setting "noresolv" to true ends up with
a device that will *only use* said resolvers for local DNS queries,
serving clients' queries via dnsmasq (which now ignores the ISP
resolvers). This can lead to confusion and break random setups as the
DNS lookup performed on clients behalf can differ in their replies from
DNS lookups performed locally on the router.
Furthermore, "localuse" is not configurable through Luci, contrary to
the other two involved settings, adding further confusion for the end
user.
To work around this situation, the logic that sets "localuse" is
inverted: "localuse" now defaults to on by default, and IFF "noresolv"
is unset (default) AND "resolvfile" is changed from default THEN
"localuse" gets turned back off, allowing for more sensible behaviour.
"localuse" value set in config/dhcp still overrides the logic in all
cases, as it did already.
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Christian Marangi [Fri, 15 Dec 2023 15:02:19 +0000 (16:02 +0100)]
generic: 6.1: fix list_count_nodes backport patch
Commit
25746a3fa2da ("drm/i915: fix up merge with usb-next branch") was
internally applied to the 5.15 patch but wasn0t applied to the backport
for kernel 6.1. Apply the same treatement also there to fix compilation
warning.
Fixes: a14240d384af ("kernel: backport list_count_nodes()")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Furong Xu [Wed, 13 Dec 2023 05:43:43 +0000 (13:43 +0800)]
rockchip: make SMP affinity of RTL8152 on XHCI more robust
XHCI bus numbers are assigned dynamically, it may varies among boards,
match the device irq name with regexp, drop the hardcoded name.
Signed-off-by: Furong Xu <xfr@outlook.com>
Pawel Dembicki [Fri, 8 Dec 2023 08:32:41 +0000 (09:32 +0100)]
kirkwood: backport fix Ctera C200 V1 ubi part name to 6.1
From the original Patch:
|In
749237967a12 downstream dts was replaced with upstream accepted
|patch. But in upstream version last partition was called "rootfs"
|instead "ubi". OpenWrt require "ubi" label for ubi rootfs.
|This patch restore proper label.
|
|Fixes:
749237967a12 ("kirkwood: Replace dtses with upstream accepted")
|
|Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(patch updated to include 6.1, dropped label properties)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Rafał Miłecki [Fri, 15 Dec 2023 10:43:08 +0000 (11:43 +0100)]
kernel: backport list_count_nodes()
It's needed by various stuff we backport. That includes NVMEM changes
queued for v6.8.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Chukun Pan [Sat, 3 Jun 2023 15:20:13 +0000 (23:20 +0800)]
ipq807x: add support for ZTE MF269
Hardware specifications:
SoC: Qualcomm IPQ8071A
RAM: 512MB of DDR3
Flash1: Eon EN25S64 8MB
Flash2: MX30UF2G18AC 256MB
Ethernet: 2x 2.5G RJ45 port
Phone: 1x RJ11 port (SPI)
USB: 1x Type-C 2.0 port
WiFi1: QCN5024 2.4GHz
WiFi2: QCN5054 5GHz
Button: Reset, WPS
Flash instructions:
1. Connect the router via serial port (115200 8N1 1.8V)
2. Download the initramfs image, rename it to initramfs.bin,
and host it with the tftp server.
3. Interrupt U-Boot and run these commands:
tftpboot initramfs.bin
bootm
4. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Raylynn Knight [Fri, 1 Dec 2023 05:17:07 +0000 (00:17 -0500)]
realtek: Clean up and standardize realtek-poe support
This patch cleans up and standardizes realtek-poe support for realtek
based switches that have supported PoE ports.
The power output of switches supported by realtek-poe package can be
configured in the 02_network ucidef_set_poe() function. This was missed
when some PoE capable switches supported by realtek-poe were added.
The realtek-poe package at one point replaced a lua-rs232 based script
and some devices were not updated to use the realtek-poe package.
Consistently add realtek-poe package to DEVICE_PACKAGES for switches
with supported PoE.
Signed-off-by: Raylynn Knight <rayknight@me.com>
Dirk Buchwalder [Fri, 24 Nov 2023 14:56:39 +0000 (15:56 +0100)]
ipq807x: fix edgecore EAP102 lan/wan
We have a report in the forum, that lan/wan is non-functional
on the EAP102 (https://forum.openwrt.org/t/edgecore-eap102/178449)
Fixing that by swapping label and phy-handle of the dp-nodes and
updating the lan/wan bmp.
Note: the original commiter of the device support seems absent for a
long time in the forum and on the OpenWrt github group.
Tested-by: Antonio Della Selva <antonio.dellaselva@uniurb.it>
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Chukun Pan [Fri, 25 Aug 2023 15:10:35 +0000 (23:10 +0800)]
ipq807x: add Arcadyan AW1000 support
Hardware specification:
SoC: Qualcomm IPQ8072A
Flash: Toshiba NAND 1GiB
RAM: 1 GiB of DDR3 466 MHz
Ethernet: 4x 1Gbps + 1x 2.5Gbps
WiFi1: QCN5024 2.4GHz ax 4x4
WiFi2: QCN5054 5GHz ax 4x4
Button: WiFi, WPS, Reset
Modem: RG500Q-EA
USB: 1 x USB 3.0
Power: DC 12V 4A
Flash instructions:
1. Download the initramfs image, rename it to
initramfs.bin, and host it with tftp server.
2. Interrupt U-Boot and run these commands:
tftpboot initramfs.bin
bootm
3. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Chukun Pan [Sun, 29 Oct 2023 15:26:06 +0000 (23:26 +0800)]
qualcommax: cleanup whitespace and sort-order
Replace blanks with tabs, also sort base-files alphabetically.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Chukun Pan [Fri, 20 Oct 2023 15:30:21 +0000 (23:30 +0800)]
kernel: add support for Toshiba TH58NYG3S0HBAI4
Correct oob size from 128 to 256 for Toshiba TH58NYG3S0HBAI4 flash.
Since it is not ONFI compliant NAND, the model name cannot be read
from anywhere, add a static NAND ID entry to correct this.
However, the NAND ID of this flash is inconsistent with the datasheet.
The actual NAND ID is only 4 ID bytes, the last ID byte is missing.[1]
Maybe this flash is counterfeit, or maybe it's another problem.
Another Toshiba flash had the same problem before. Refer to commit
a83dc6b ("kernel: move Toshiba-TC58NVG0S3H patch to ipq40xx"), put
the patch into qualcommax target to avoid affecting other devices.
The patch is verified on Arcadyan AW1000.
[1] Datasheet available at (the ID table is on page 50):
https://europe.kioxia.com/content/dam/kioxia/newidr/productinfo/datasheet/201910/DST_TH58NYG3S0HBAI4-TDE_EN_31565.pdf
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Wed, 13 Dec 2023 16:03:13 +0000 (17:03 +0100)]
package: kernel: detach of-mdio dependency from stmmac-core
Detach of-mdio dependency from stmmac-core kmod to fix support for
x86_64 target. This target doesn't use OpenFirmware infrastructure and
stmmac-core for the dwmac-intel driver doesn't depends on it.
Add kmod-of-mdio to any other user of stmmac-core as it's not inherit
from stmmac-core anymore.
Fixes: #14209
Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Wed, 13 Dec 2023 16:00:17 +0000 (17:00 +0100)]
package: kernel: move pcs-xpcs from armsr to generic
Move pcs-xpcs kmod from armsr modules.mk to generic modules package.
Also add additional dependency to x86_64 as stmmac-core it's now used
by x86_64 target and depends on this package.
Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rafał Miłecki [Wed, 13 Dec 2023 07:52:59 +0000 (08:52 +0100)]
uboot-envtools: bump PKG_RELEASE
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 12 Dec 2023 23:02:12 +0000 (00:02 +0100)]
uboot-envtools: fix reading NVMEM device's compatible value
Fixes: fea4ffdef28f ("uboot-envtools: update to 2023.04")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Philip Prindeville [Mon, 11 Dec 2023 06:35:57 +0000 (23:35 -0700)]
base-files: ipcalc.sh: Add tests for unroutable, etc
See RFC-1918, RFC-3927, and RFC-1122.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sat, 11 Nov 2023 19:37:20 +0000 (12:37 -0700)]
base-files: ipcalc.sh: Add netmask2prefix function
Also add is_contiguous to check if it's a valid netmask.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sat, 4 Nov 2023 03:11:49 +0000 (21:11 -0600)]
base-files: ipcalc.sh: Add prefix-to-netmask conversion
Seems like it might be used in other places, so factor it into the
library.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Tue, 24 Oct 2023 06:16:25 +0000 (00:16 -0600)]
base-files: ipcalc.sh: Add some commentary, etc.
Explain some of the more obscure logic, or where we deviate from
what the original awk code did. Also, give a count of the usable
addresses on the subnet.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sun, 22 Oct 2023 19:32:06 +0000 (13:32 -0600)]
base-files: ipcalc.sh: Add support for decimal output
This is useful if you later need to perform numeric range-checking
on addresses, i.e. to see if an address falls inside a CIDR range,
etc. and what interface it corresponds to.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sun, 22 Oct 2023 19:27:50 +0000 (13:27 -0600)]
base-files: ipcalc.sh: Rewrite in pure shell
Also add better error checking on input.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Furong Xu [Tue, 12 Dec 2023 08:12:12 +0000 (16:12 +0800)]
rockchip: fix eth1 irq affinity
NanoPi R2S and some other RK3328 boards use RTL8152 as eth1,
which is connected to xhci-hcd:usb1 but not xhci-hcd:usb3
|:~# cat /proc/interrupts
| CPU0 CPU1 CPU2 CPU3
| 11: 53449 171813 129595 87823 GICv2 30 Level arch_timer
| 18: 0 0 0 0 GICv2 94 Level rockchip_usb2phy
| 19: 0 0 0 0 GICv2 32 Level
ff1f0000.dma-controller
| 20: 0 0 0 0 GICv2 33 Level
ff1f0000.dma-controller
| 21: 4 0 0 0 GICv2 89 Level ttyS2
| 22: 0 0 0 0 GICv2 43 Level
ff350800.iommu
| 23: 0 0 0 0 GICv2 106 Level
ff360480.iommu
| 24: 0
1417932 0 0 GICv2 56 Level eth0
| 25: 334 0 0
4422194 GICv2 99 Level xhci-hcd:usb1
| 26: 0 0 0 0 GICv2 48 Level ehci_hcd:usb3
| 27: 0 0 0 0 GICv2 49 Level ohci_hcd:usb2
| 28: 3285 0 0 0 GICv2 69 Level
ff160000.i2c
| 29: 0 0 0 0 rockchip_gpio_irq 24 Level rk805
| 30: 0 0 0 0 rk805 0 Edge rk805_pwrkey_fall
| 35: 0 0 0 0 rk805 5 Edge RTC alarm
| 37: 0 0 0 0 rk805 7 Edge rk805_pwrkey_rise
| 38: 0 0 0 0 GICv2 90 Level rockchip_thermal
| 39: 0 0 0 0 GICv2 72 Edge
ff1a0000.watchdog
| 40: 2601 0 0 0 GICv2 44 Level dw-mci
| 41: 0 0 0 0 rockchip_gpio_irq 0 Edge keys
|IPI0: 1559 1208 893 1131 Rescheduling interrupts
|[...]
Fix 40-net-smp-affinity to match the correct device irq name.
Signed-off-by: Furong Xu <xfr@outlook.com>
Eric J. Anderson [Mon, 4 Dec 2023 21:41:47 +0000 (22:41 +0100)]
ath79: make boot-leds service executable
This service was unfunctional due to not having its executable bit
set.
Fixes #13500.
Signed-off-by: Eric J. Anderson <eric.j.ason256@gmail.com>
Lech Perczak [Wed, 15 Nov 2023 00:53:49 +0000 (01:53 +0100)]
imx: enable CONFIG_CPU_FREQ_THERMAL
Without that, imx_thermal fails to initialize on deferred probe, because
it fails to register cpufreq cooling device.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Wed, 15 Nov 2023 02:03:26 +0000 (03:03 +0100)]
imx: imx7d-pico-pi: add CPU supply nodes to device tree
Attach sw1a as "cpu-supply" to both CPUs in order to cpufreq driver to
prove successfully.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Wed, 15 Nov 2023 02:22:56 +0000 (03:22 +0100)]
imx: enable CONFIG_REGULATOR_PFUZE100 globally
PFUZE100 series of PMICs are used on boards supported by both
subtargets. Enable this for whole i.MX target.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Florian Eckert [Tue, 31 Oct 2023 07:14:21 +0000 (08:14 +0100)]
tools: add ledumon and ledhwbmon packages
ledumon:
This program creates a new userspace LED class device and monitors it.
For this it es using the kmod-leds-uled.ko kernel module.
ledhwbmon:
This program monitors LED brightness level changes having its origin
in hardware/firmware, i.e. outside of kernel control.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Pawel Dembicki [Tue, 14 Nov 2023 10:18:36 +0000 (11:18 +0100)]
kirkwood: add 6.1 kernel as testing
It allow to test 6.1 kernel in Kirkwood.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 10:17:13 +0000 (11:17 +0100)]
kirkwood: 6.1: refresh kernel config
Done by 'make kernel_oldconfig'.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 10:16:40 +0000 (11:16 +0100)]
kirkwood: kernel: refresh 6.1 patches
Kernel patches copied from 5.15 need to be refreshed.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 08:09:58 +0000 (09:09 +0100)]
kirkwood: copy config 5.15 to 6.1
Config was just copied.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 08:09:11 +0000 (09:09 +0100)]
kirkwood: copy patches 5.15 to 6.1
Simple copy 5.15 patches.
Upstreamed patch dropped:
001-5.18-Add-Ctera-C-200-V1-board.patch
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(kirkwoor -> kirkwood in subject)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Pawel Dembicki [Fri, 8 Dec 2023 08:32:41 +0000 (09:32 +0100)]
kirkwood: fix Ctera C200 V1 ubi part name
In
749237967a12 downstream dts was replaced with upstream accepted
patch. But in upstream version last partition was called "rootfs"
instead "ubi". OpenWrt require "ubi" label for ubi rootfs.
This patch restore proper label.
Fixes: 749237967a12 ("kirkwood: Replace dtses with upstream accepted")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Christian Svensson [Mon, 20 Nov 2023 20:35:26 +0000 (21:35 +0100)]
octeon: upgrade to 6.1 kernel
The kernel patches apply with only minor changes. The only other notable
change is that octeon-usb has moved from staging and had its config
macro renamed from CONFIG_OCTEON_USB to CONFIG_USB_OCTEON_HCD.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Nick Hainke [Mon, 11 Dec 2023 15:48:47 +0000 (16:48 +0100)]
ethtool: update to 6.6
Release Notes:
https://lore.kernel.org/netdev/
20231123220625.q427zyjaogdmlf6d@lion.mk-sys.cz/T/
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Mon, 11 Dec 2023 11:22:35 +0000 (06:22 -0500)]
kernel: bump 6.1 to 6.1.67
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.67
NO patches affected.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Fri, 8 Dec 2023 12:08:03 +0000 (07:08 -0500)]
kernel: bump 6.1 to 6.1.66
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.66
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Rafał Miłecki [Tue, 12 Dec 2023 11:02:31 +0000 (12:02 +0100)]
kernel: backport upstream nvmem fix for "fixed-layout"
It replaces a pretty much identical downstream patch.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Christian Marangi [Tue, 12 Dec 2023 00:25:01 +0000 (01:25 +0100)]
ipq806x: drop useless uci-defaults compat version script
Drop useless uci-defaults compat version script as it's not needed
anymore and should have been dropped on DSA conversion.
The script was needed for Linksys EA7500 and EA8500 for the kernel space
migration. We now handle compat version setting in board.d scripts.
Having this script with actually the wrong value (2.0) cause upgrade
problem and conflicts with board.d script.
Fixes: 337e36e0ef98 ("ipq806x: convert each device to DSA implementation")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 12 Dec 2023 00:18:08 +0000 (01:18 +0100)]
netifd: update to Git HEAD (2023-12-12)
8f2806a37fe1 system-linux: set master early on apply settings
e3fc2b0026a5 system-linux: skip refreshing MAC on master change if custom MAC
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Nick Hainke [Mon, 11 Dec 2023 15:18:58 +0000 (16:18 +0100)]
tools/cmake: update to 3.28.0
Release Notes:
- https://www.kitware.com/cmake-3-28-0-available-for-download/
Refresh patches:
- 120-curl-fix-libressl-linking.patch
- 130-bootstrap_parallel_make_flag.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Daniel Golle [Sun, 10 Dec 2023 23:09:00 +0000 (23:09 +0000)]
mediatek: bananapi-r3: add overlay for ReSpeaker 2-mic hat
Add DT overlay to allow using the ReSpeaker 2-mic hat connected to
the 26-pin header of the BananaPi BPi-R3.
Supported sample formats: S16_LE, S24_LE, S32_LE
Supported sample rates: 8/12/16/24/32/48/96/192 kHz
| BPi-R3 | ReSpeaker 2-mic
Signal | 26-pin | 40-pin
----------+----------+-------------------
VCC 5V | 2 | 2
I2C SDA | 3 | 3
I2C SCL | 5 | 5
GND | 6 | 6
PCM CLK | 12 | 12
PCM FS | 15 | 35
PCM DIN | 26 | 38
GND | 25 | 39
PCM DOUT | 22 | 40
Once connected, install the driver and tell U-Boot to apply the DT
overlay:
opkg kmod-sound-soc-mt7986-wm8960
fw_setenv bootconf_base "config-mt7986a-bananapi-bpi-r3#mt7986a-bananapi-bpi-r3-respeaker-2mics"
reboot
To setup the ReSpeaker for Stereo out on the Headphone plug:
amixer sset 'Right Output Mixer PCM' on
amixer sset 'Left Output Mixer PCM' on
amixer sset 'PCM Playback -6dB' off
amixer sset 'O018 I150_Switch' on
amixer sset 'O019 I151_Switch' on
amixer sset 'O124 I032_Switch' on
amixer sset 'O125 I033_Switch' on
amixer sset 'Headphone' 121
amixer sset 'Playback' 255
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 28 Sep 2023 18:13:23 +0000 (19:13 +0100)]
kernel: modules: package MT7986 audio drivers
Packages the audio drivers for the MediaTek MT7986 SoC used with
Wolfson WM8960 codec.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 11 Dec 2023 00:24:40 +0000 (00:24 +0000)]
kernel: modules: break-out WM8960 codec module
Package codec module for WM8960 in its own package to be used by more
than one target.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Maso Huang [Thu, 7 Sep 2023 08:40:19 +0000 (16:40 +0800)]
mediatek: backport MT7986 audio driver
Pick commits adding drivers for audio engine found in MT7986 from
Linux 6.6 as well as follow-up fixes from Linux 6.7.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
John Audia [Fri, 8 Dec 2023 13:12:51 +0000 (08:12 -0500)]
kernel: bump 5.15 to 5.15.142
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.142
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Nick Hainke [Sat, 11 Nov 2023 03:18:18 +0000 (04:18 +0100)]
iproute2: update to 6.6.0
Release Notes:
https://lore.kernel.org/netdev/
20231106090325.
07092c87@hermes.local/T/
Automatically refreshed:
- 115-add-config-xtlibdir.patch
- 175-reduce-dynamic-syms.patch
- 195-build_variant_ip_tc.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 11 Nov 2023 03:23:58 +0000 (04:23 +0100)]
strace: update to 6.6
Release Notes:
https://github.com/strace/strace/releases/tag/v6.6
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Thu, 7 Dec 2023 12:30:40 +0000 (13:30 +0100)]
util-linux: update to v2.39.3
Changes:
2da5c904e build-sys: release++ (v2.39.3)
03c939edd docs: update v2.39.3-ReleaseNotes
dafb120ef docs: update AUTHORS file
bfc9691ce po-man: merge changes
d2232b609 po: merge changes
4ab356c1c po: add ro.po (from translationproject.org)
7e147d16c po: update es.po (from translationproject.org)
e8cb61f07 lsfd: fix memory leak in append_filter_expr()
192d8aaa0 lsfd: avoid undefined behavior
756588f8c lsfd: (man) fix the form for the optional argument of --inet option
8d78c1306 Add Phytium FTC310 & FTC664 support
b75322cdb Add Phytium FTC862 cpu model. fix:#2486
ec1b0eb36 libmount: accept '\' as escape for options separator
2e5f5c8d8 tests: add ts_skip_docker
0b3254cac Merge branch 'stable-2.39/bcachefs-fixes' of https://github.com/t-8ch/util-linux into PR/stable-v2.39.3
649843934 tests: skip broken tests on docker
fa9b53658 libblkid: (bcachefs) add support for sub-device labels
3c5d991b0 libblkid: (bcachefs) adapt to major.minor version
ece194082 libuuid: avoid truncate clocks.txt to improve performance
84a62c1a5 libuuid/src/gen_uuid.c: fix cs_min declaration
93239aa78 libmount: fix possible NULL dereference [coverity scan]
a6def815e meson: install wall executable with group 'tty'
c6c1c69c3 meson: install write executable with group 'tty'
bf2cd1d5a libmount: improve mnt_table_next_child_fs()
c14f5bf37 docs: add SPDX to boilerplate.c
fdd9f11f5 disk-utils: add SPDX and Copyright notices
e7dbe9c78 include/audit-arch: add missing SPDX
5ec7b14a7 setterm: avoid restoring flags from uninitialized memory
64d2300e6 Fix man page for col to correct documentation error
7cc2c9625 Update col.c to fix option mistake
122d7e7af umount: handle bindmounts during --recursive
da18b31ff lscpu: fix caches separator for --parse=<list>
3a5c9c1dd Use empty libuser config file.
7058d793d libblkid: exfat: fix fail to find volume label
d065ff00a blkpr: store return value of getopt_long in int
9ca6f1712 lib/path: Set errno in case of fgets failure
e2f0aa5c2 autotools: fix AC_DEFINE_UNQUOTED() use
cefd05c47 autotools: fix librtas check
f27fbafb2 lib/path: fix typos
f8ab70477 lib/path: set errno in case of error
5ec30a362 lib/path: fix possible out of boundary access
edc723cd3 libblkid: reset errno before calling probefuncs
8de89778b setpriv: fix group argument completion
41599054c libfdisk: reset errno before calling read()
cce4e4405 blkid: fix call to err_exclusive_options
b718f985c docs: use HTTPS for GitHub clone URLs
2bddfa692 libblkid: (probe) handle probe without chain gracefully
3d3121678 lib/idcache: always gracefully handle null cache
368521e45 script-playutils: close filestream in case ignore_line() fails
087b0d238 libblkid: (vxfs) report endianness
7e5056f33 libblkid: (ntfs) validate that sector_size is a power of two
f368ccc75 libsmartcols: handle nameless tables in export format
f5cace8da ldattach: don't call exit() from signal handler
03c12a34c lslogins: fix realloc() loop allocation size
83ba179b1 lib/env: avoid underflow of read_all_alloc() return value
813851fba libblkid: avoid memory leak of cachefile path
4459623cd libmount: gracefully handle NULL path in mnt_resolve_target()
dbde7a537 more: avoid out-of-bound access
c26badd5d libfdisk: handle allocation failure in fdisk_new_partition
5c250aa64 login: Use pid_t for child_pid
be3f1712e login: move comment
98be90b5b build-sys: fix libmount/src/hooks.c use
a711af02d lscpu: Use 4K buffer size instead of BUFSIZ
45c6136cb autotools: fix typos
aa98c4ecc libmount: make.stx_mnt_id use more robust
c697c2bb6 libmount: report statx in features list
13711f3ab libmount: fix statx() includes
e9ed5a2b8 libblkid: (vfat) avoid modifying shared buffer
d2cadf099 libblkid: (jmicron_raid) use checksum APIs
c54c99efd libblkid: (jmicron_raid) avoid modifying shared buffer
64418c52b libblkid: (zonefs) avoid modifying shared buffer
b66da7ce4 losetup: fix JSON MAJ:MIN
44d7bf2c8 lslogins: (man) fix -y option formatting
7d6c71e51 include: add DragonFlyBSD GPT partition types
6b9fda87c libblkid: (bcachefs) fix size validation
acbf17ae8 libblkid: (bcachefs) fix compiler warning [-Werror=sign-compare]
1ec71634a libblkid: (bcachefs) fix not detecting large superblocks
68564ebb5 libmount: Fix regression when mounting with atime
Signed-off-by: Nick Hainke <vincent@systemli.org>
Felix Fietkau [Mon, 11 Dec 2023 12:15:09 +0000 (13:15 +0100)]
mt76: update to Git HEAD (2023-12-11)
f63f87cd5b45 wifi: mt76: mt7996: fix shift overflow warning on 32 bit systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Christian Marangi [Sun, 10 Dec 2023 10:43:45 +0000 (11:43 +0100)]
lua5.3: fix typo calling lua53 instead of lua5.3 for Package Default
Fix typo calling lua53 instead of lua5.3 for Package Default definition.
This cause only missing description of the package and doesn't cause
any build regression.
Fixes: c52ca08d4008 ("lua5.3: build shared library")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Golle [Fri, 17 Nov 2023 02:25:09 +0000 (02:25 +0000)]
mediatek: add support for Adtran SmartRG Bonanza Peak series
The Bonanza Peak series are a couple of MT7986-powered 2.5 GBit/s
Wi-Fi 6 residential gateway, access point and mesh router products.
All of them come with an eMMC to boot from, are powered via USB-C and
got a USB 3.0 type-A port. All of them got a Dialog (Renesas)
DA14531
Bluetooth module connected via UART. If the device was previously
running stock firmware, the BT chip's internal flash has been loaded
with firmware and it can be attached using hciattach when using
OpenWrt.
SOC: MediaTek MT7986A
RAM: 2 GiB DDR4
eMMC: 8 GiB
Bluetooth: BLE5 (
DA14531)
Serial: 3.3V level, 115200 8n1 on 4-pin connector
* SDG-8612 - Dual-band RJ-45 gateway
2x 2.5G MaxLinear PHY for WAN port
3x 1GE LAN ports via MT7531 switch
* SDG-8614 - Dual-band SFP gateway
1x SFP cage with up to 2.5G speed
1x 2.5G MaxLinear PHY for LAN port
3x 1GE LAN ports via MT7531 switch
* SDG-8622 - Tri-band mesh router
2x 2.5G MaxLinear PHY
The MT7986 2G and 5G are used as 2G and 5G high band.
There’s a MT7915 PCIe card for 5G low band.
* SDG-8632 - Tri-band mesh router with 6 GHz
2x 2.5G MaxLinear PHY
The MT7986 serves the 2G and 6G bands.
There’s a MT7915 PCIe card for 5G.
Installation via U-Boot serial console:
0. setup TFTP server with IP 192.168.1.10/24, place initramfs image
renamed to openwrt.XXX where XXX is the internal product number:
SDG-8612: XXX = 412
SDG-8614: XXX = 414
SDG-8622: XXX = 422
SDG-8632: XXX = 432
1. connect to the serial console and power on the device.
Interrupt the bootloader by pressing 'st'
2. setenv boot_mode openwrt ; saveenv
3. run boot1
Load firmware via TFTP and write to flash
4. run boot2
Now OpenWrt initramfs should boot
5. upload sysupgrade.bin via scp to /tmp
6. sysupgrade
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 17 Nov 2023 02:01:34 +0000 (02:01 +0000)]
mediatek: import driver for Adtran SmartRG RGBW LED
Import driver for I2C-connected HolTek MCU controlling the RGBW LED
found in Adtran SmartRG devices.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 10 Dec 2023 01:15:36 +0000 (01:15 +0000)]
kernel: hack: support inverted LEDs on MaxLinear GPY211 PHY
Add downstream DT property to setup the PHY LEDs of the MaxLinear
GPY211 PHY in such way that the VDD of the LED is driven by the SoC
pin rather than the GND (which is the default).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 17 Nov 2023 00:02:05 +0000 (00:02 +0000)]
base-files: add mmc_get_mac_ascii function
Similar to the *_get_mac_binary function, also split the common parts
off mtd_get_mac_ascii into new get_mac_ascii function and introduce
mmc_get_mac_ascii which uses it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Andrey VOLKOV [Sat, 2 Dec 2023 21:03:31 +0000 (22:03 +0100)]
generic: 6.1: fix patch 814 Add Qualcomm secure QFPROM support
The backported patch is broken, since kernel 6.1 has not
'include/linux/firmware' directory yet.
Fix the include to the correct path.
Fixes: #14115
Fixes: 52c365f055f6 ("kernel: backport v6.6 nvmem changes")
Signed-off-by: Andrey VOLKOV <andrey@volkov.fr>
[ improve commit description and title ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rosen Penev [Wed, 29 Nov 2023 00:41:20 +0000 (16:41 -0800)]
kernel: remove mac-address-ascii dts support
Deprecated and replaced treewide with mac-base. Remove to avoid modern
usage.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 29 Nov 2023 19:06:38 +0000 (11:06 -0800)]
kernel: of: remove mac-address-increment support hack
The MAC address increment has been replaced by the new "mac-base"
NVMEM fixed layout. This old implementation can be removed now.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Pascal Coudurier [Fri, 1 Dec 2023 21:25:58 +0000 (22:25 +0100)]
x86: kernel: modules: clean makefiles
Signed-off-by: Pascal Coudurier <coudu@gmx.com>
Pascal Coudurier [Fri, 1 Dec 2023 20:49:27 +0000 (21:49 +0100)]
x86: remove unused 5.15 kernel configs and patches
As we move to 6.1 by default, remove unused 5.15 kernel configs and patches
Signed-off-by: Pascal Coudurier <coudu@gmx.com>
Pascal Coudurier [Fri, 1 Dec 2023 20:42:37 +0000 (21:42 +0100)]
x86: move to 6.1 kernel by default
6.1 kernel has been in testing for a few month without issues
Signed-off-by: Pascal Coudurier <coudu@gmx.com>
Rosen Penev [Sat, 2 Dec 2023 01:20:50 +0000 (17:20 -0800)]
ipq806x: fix leading 0 warnings
dtc warns about leading 0s.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 2 Dec 2023 01:20:19 +0000 (17:20 -0800)]
ipq806x: avoid duplicate partition nodes
Avoids dtc warnings by moving it in a subnode.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 2 Dec 2023 00:52:27 +0000 (16:52 -0800)]
ipq806x: reset-gpio to reset-gpios
The former is deprecated. Fixes dtc warning.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Christian Marangi [Sat, 9 Dec 2023 13:45:50 +0000 (14:45 +0100)]
ixp4xx: add Generic subtarget definition
Add Generic subtarget definition. This is needed to keep consistent name
on every other target/subtarget and also to permit correct work of CI
workflows that expect a target/subtarget pattern.
Fixes: c16b2293fe71 ("ixp4xx: Resurrect IXP4xx support using device tree")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Golle [Fri, 8 Dec 2023 23:34:32 +0000 (23:34 +0000)]
ramips: refresh patches
Refresh ramips patches which got out of sync due to backported changes
of the MediaTek Ethernet driver.
Fixes: 6407ef8d2bcb ("kernel: backport upstream mediatek WED changes")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Thu, 7 Dec 2023 12:22:48 +0000 (13:22 +0100)]
tools/bash: update to 5.2.21
Update to latest release.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 4 Dec 2023 16:09:53 +0000 (17:09 +0100)]
toolchain/gdb: update to 14.1
Release Notes:
https://lists.gnu.org/archive/html/info-gnu/2023-12/msg00001.html
Refresh patch:
- 120-fix-compile-flag-mismatch.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Felix Fietkau [Fri, 8 Dec 2023 14:52:12 +0000 (15:52 +0100)]
kernel: remove already backported patch, fix build
Fixes: 6407ef8d2bcb ("kernel: backport upstream mediatek WED changes")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 17 Nov 2023 16:59:29 +0000 (17:59 +0100)]
kernel: backport upstream mediatek WED changes
Reorder and update existing patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Thu, 7 Dec 2023 12:14:58 +0000 (13:14 +0100)]
tools/pkgconf: update to 2.1.0
Changes:
https://github.com/pkgconf/pkgconf/blob/
5825e2c6d608ef74a97349e81d750ab95c53cf50/NEWS#L4
Signed-off-by: Nick Hainke <vincent@systemli.org>
Felix Fietkau [Mon, 20 Nov 2023 12:57:17 +0000 (13:57 +0100)]
mt76: update to Git HEAD (2023-12-08)
890ae4d717f1 wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
fcc2f3d82bc9 wifi: mt76: fix lock dependency problem for wed_lock
77cc14596202 wifi: mt76: mt792x: move mt7921_skb_add_usb_sdio_hdr in mt792x module
bc85355885d1 wifi: mt76: mt792x: move some common usb code in mt792x module
c27f01c4c834 wifi: mt76: mt7996: get tx_retries and tx_failed from txfree
30aba4c18307 wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic
119bebff244b wifi: mt76: mt7996: enable PPDU-TxS to host
a4005e0e83e7 wifi: mt76: mt7996: remove periodic MPDU TXS request
d6cc20bf5913 wifi: mt76: reduce spin_lock_bh held up in mt76_dma_rx_cleanup
5d94251d641c wifi: mt76: mt7921: move connac nic capability handling to mt7921
266341b5019d wifi: mt76: mt7921: enable set txpower for UNII-4
581449ac5274 wifi: mt76: mt7921: add 6GHz power type support for clc
9bfd669e9477 wifi: mt76: mt7921: get regulatory information from the clc event
4a0f839da0f1 wifi: mt76: mt7921: update the channel usage when the regd domain changed
f4df423d3d56 wifi: mt76: add ability to explicitly forbid LED registration with DT
54d369e79972 wifi: mt76: mt7921: support 5.9/6GHz channel config in acpi
b39b6cba220f wifi: mt76: mt7996: fix uninitialized variable in parsing txfree
77194e652885 wifi: mt76: fix typo in mt76_get_of_eeprom_from_nvmem function
c37738fc9097 wifi: mt76: limit support of precal loading for mt7915 to MTD only
d6e8aa634a19 wifi: mt76: make mt76_get_of_eeprom static again
d1c671a90eba wifi: mt76: permit to use alternative cell name to eeprom NVMEM load
5539001fe4e3 wifi: mt76: permit to load precal from NVMEM cell for mt7915
48d413380685 wifi: mt76: Remove unnecessary (void*) conversions
ea2814289147 wifi: mt76: mmio: move mt76_mmio_wed_{init,release}_rx_buf in common code
9fb0277d7ee8 wifi: mt76: move mt76_mmio_wed_offload_{enable,disable} in common code
4b47145ecf44 wifi: mt76: move mt76_net_setup_tc in common code
d798d5d6f770 wifi: mt76: introduce mt76_queue_is_wed_tx_free utility routine
48b0cedbf83f wifi: mt76: introduce wed pointer in mt76_queue
c550204e347d wifi: mt76: increase MT_QFLAG_WED_TYPE size
2e7f30f22cfd wifi: mt76: mt7996: add wed tx support
ec8765a02fc8 wifi: mt76: dma: introduce __mt76_dma_queue_reset utility routine
a469aaac9784 wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signature
abca260a15c4 wifi: mt76: mt7996: add wed rx support
be2e74c0c495 wifi: mt76: move wed reset common code in mt76 module
7f17e164fbb4 wifi: mt76: mt7996: add wed reset support
0f89bf58efda wifi: mt76: mt7996: add wed rro delete session garbage collector
a58b75f863ca wifi: mt76: mt7915: fallback to non-wed mode if platform_get_resource fails in mt7915_mmio_wed_init()
36d2ddd94eeb wifi: mt76: mt7996: add support for variants with auxiliary RX path
cec7720c9341 wifi: mt76: mt7996: add TX statistics for EHT mode in debugfs
9852093062e8 wifi: mt76: connac: add thermal protection support for mt7996
955540a4df74 wifi: mt76: mt7996: add thermal sensor device support
af41374a3b8e wifi: mt76: connac: add beacon duplicate TX mode support for mt7996
3c98d7b7fa23 wifi: mt76: mt7996: fix the size of struct bss_rate_tlv
ee2169c00539 wifi: mt76: mt7996: adjust WFDMA settings to improve performance
0aead5de68a7 wifi: mt76: connac: set fixed_bw bit in TX descriptor for fixed rate frames
ab5580ff5a4f wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGED
eed234afed7e wifi: mt76: mt7996: align the format of fixed rate command
d9a855285b95 wifi: mt76: mt7996: fix rate usage of inband discovery frames
47799aefe263 wifi: mt76: change txpower init to per-phy
264e1ecfe1b4 wifi: mt76: mt7996: add txpower setting support
c7b243b127eb wifi: mt76: use chainmask for power delta calculation
05f433900a02 wifi: mt76: mt7996: switch to mcu command for TX GI report
ae963198e605 wifi: mt76: mt7996: fix alignment of sta info event
d0d2e03591d6 wifi: mt76: mt7996: rework ampdu params setting
e87f4efc7638 wifi: mt76: connac: add beacon protection support for mt7996
0dfcc53a8e5d wifi: mt76: connac: fix EHT phy mode check
30c54a53bf8b wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981
17297c97b737 wifi: mt76: mt7915: also MT7981 is 3T3R but nss2 on 5 GHz band
eeb48c081034 wifi: mt76: mt7996: fix mt7996_mcu_all_sta_info_event struct packing
b74ad922659c wifi: mt76: mt7996: introduce mt7996_band_valid()
51cb541c1e53 wifi: mt76: connac: add firmware support for mt7992
c0eda4d96ec8 wifi: mt76: mt7996: add DMA support for mt7992
f12471968a53 wifi: mt76: mt7996: rework register offsets for mt7992
8d11dae73eb8 wifi: mt76: mt7996: support mt7992 eeprom loading
6c2b2c37abd7 wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992
df1d3b3c67e5 wifi: mt76: connac: add new definition of tx descriptor
f997e759cea5 wifi: mt76: mt7996: add PCI IDs for mt7992
94e3632e4e93 wifi: mt76: mt7925: remove iftype from mt7925_init_eht_caps signature
9c7b98c03173 net: ethernet: mtk_wed: rename mtk_rxbm_desc in mtk_wed_bm_desc
4423b4eb69fb wifi: mt76: mt7996: fix endianness in mt7996_mcu_wed_rro_event
b97d899a7907 wifi: mt76: mt7921: fix kernel panic by accessing invalid 6GHz channel info
9ef06028d4fe wifi: mt76: mt7921s: fix workqueue problem causes STA association fail
95c14207d2a9 wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAM
dbea5151412b wifi: mt76: mt7921: reduce the size of MCU firmware download Rx queue
a84a355d2e0a wifi: mt76: mt7921: fix country count limitation for CLC
c498f27ad075 wifi: mt76: mt7921: fix CLC command timeout when suspend/resume
3098d968abe4 wifi: mt76: mt7921: fix wrong 6Ghz power type
7730fc91dd15 wifi: mt76: fix shift overflow warnings on 32 bit systems
f559adf1849c wifi: mt76: fix crash with WED rx support enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Thu, 7 Dec 2023 22:12:00 +0000 (23:12 +0100)]
ucode: adjust module dependencies
Let ucode-mod-* packages select the ucode interpreter instead of depending
on it to avoid recursive dependency chains in unrelated packages.
Fixes: https://github.com/openwrt/packages/issues/22837
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Nick Hainke [Mon, 4 Dec 2023 15:48:00 +0000 (16:48 +0100)]
tools/cmake: update to 3.27.9
Release Notes:
- https://www.kitware.com/cmake-3-27-7-available-for-download/
- https://www.kitware.com/cmake-3-27-9-available-for-download/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Mon, 4 Dec 2023 16:03:21 +0000 (17:03 +0100)]
libxml2: update to 2.12.1
Release Notes:
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.0
- https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.1
Remove patch:
- 010-iconv.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Kamil Jońca [Sun, 5 Nov 2023 13:49:01 +0000 (14:49 +0100)]
ramips: add TP-LINK TL-WR902AC v4
Seems to be very similar to: https://openwrt.org/toh/tp-link/tl-wr902ac_v3
1 x usb
1 x eth
Powered by mini usb port.
Installation:
Can use TFTP method to install:
1. establish TFTP server at 192.168.0.66
2. provide tp_recover.bin file to the TFTP server
3. turn on router with reset button pressed
4. wait for led blinking, then release reset
Specification based on dmesg from already flashed device:
SoC Type: MediaTek MT7628AN ver:1 eco:2
CPU0 revision is:
00019655 (MIPS 24KEc)
Memory: 56028K/65536K available
CPU Clock: 580MHz
WiFi: MT7613BE
MAC addresses are all the same, except wifi5g which last part is decrement by one, ie.:
eth0 40:ed:00:cf:b9:9b
br-lan 40:ed:00:cf:b9:9b
phy0-ap0 40:ed:00:cf:b9:9b
phy1-ap0 40:ed:00:cf:b9:9a
Signed-off-by: Kamil Jońca <kjonca@onet.pl>
Hannu Nyman [Wed, 6 Dec 2023 12:49:42 +0000 (14:49 +0200)]
ipq806x: Fix nighthawk R7800/XR450/XR500 wan MAC
Correct the NVMEM mac-base field usage to read the wan MAC
correctly from flash.
Reference to discussion at https://github.com/openwrt/openwrt/pull/13952#issuecomment-
1842749122
Fixes: d264d3a60 ("ipq806x: remove mac-address-increment")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Luis Mita [Wed, 6 Dec 2023 13:30:10 +0000 (09:30 -0400)]
mediatek: add SPDX header for Confiabits MT7981 DTS
Fixing ambiguous licensing.
Signed-off-by: Luis Mita <luis@luismita.com>
Felix Fietkau [Wed, 6 Dec 2023 15:17:21 +0000 (16:17 +0100)]
udebug: update to Git HEAD (2023-12-06)
6d3f51f9fda7 ucode: check for errors in ftruncate()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Mikhail Zhilkin [Sat, 25 Nov 2023 12:14:57 +0000 (12:14 +0000)]
ramips: add support for Rostelecom RT-FE-1A
Rostelecom RT-FE-1A is a wireless WiFi 5 router manufactured by Sercomm
company.
Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5x GbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: No
Button: 2 buttons (Reset & WPS)
LEDs:
- 1x Power (green, unmanaged)
- 1x Status (green, gpio)
- 1x 2.4G (green, hardware, mt76-phy0)
- 1x 2.4G (blue, gpio)
- 1x 5G (green, hardware, mt76-phy1)
- 1x 5G (blue, gpio)
- 5x Ethernet (green, hardware, 4x LAN & WAN)
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot
Installation
-----------------
1. Login to the router web interface (default http://192.168.0.1/)
under "admin" account
2. Navigate to Settings -> Configuration -> Save to Computer
3. Decode the configuration. For example, using cfgtool.py tool (see
related section):
cfgtool.py -u configurationBackup.cfg
4. Open configurationBackup.xml and find the following block:
<OBJECT name="User." type="object" writable="1" encryption="0" >
<OBJECT name="1." type="object" writable="1" encryption="0" >
<PARAMETER name="Password" type="string" value="<some value>" writable="1" encryption="1" password="1" />
</OBJECT>
5. Replace <some value> by a new superadmin password and add a line
which enabling superadmin login after. For example, the block after
the changes:
<OBJECT name="User." type="object" writable="1" encryption="0" >
<OBJECT name="1." type="object" writable="1" encryption="0" >
<PARAMETER name="Password" type="string" value="s0meP@ss" writable="1" encryption="1" password="1" />
<PARAMETER name="Enable" type="boolean" value="1" writable="1" encryption="0"/>
</OBJECT>
6. Encode the configuration. For example, using cfgtool.py tool:
cfgtool.py -p configurationBackup.xml
7. Upload the changed configuration (configurationBackup_changed.cfg) to
the router
8. Login to the router web interface (superadmin:xxxxxxxxxx, where
xxxxxxxxxx is a new password from the p.5)
9. Enable SSH access to the router (Settings -> Access control -> SSH)
10. Connect to the router using SSH shell using superadmin account
11. Run in SSH shell:
sh
12. Make a mtd backup (optional, see related section)
13. Change bootflag to Sercomm1 and reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
reboot
14. Login to the router web interface under admin account
15. Remove dots from the OpenWrt factory image filename
16. Update firmware via web using OpenWrt factory image
Revert to stock
---------------
Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
cd /tmp
for i in 0 1 2 3 4 5 6 7 8 9; do nanddump -f mtd$i /dev/mtd$i; \
tftp -l mtd$i -p 192.168.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
tftp -l mtd.md5 -p 192.168.0.2
MAC Addresses
-------------
+-----+------------+---------+
| use | address | example |
+-----+------------+---------+
| LAN | label | f4:*:66 |
| WAN | label + 11 | f4:*:71 |
| 2g | label + 2 | f4:*:68 |
| 5g | label + 3 | f4:*:69 |
+-----+------------+---------+
The label MAC address was found in Factory, 0x21000
cfgtool.py
----------
A tool for decoding and encoding Sercomm configs.
Link: https://github.com/r3d5ky/sercomm_cfg_unpacker
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
projects / openwrt / staging / stintel.git / log