From: Robert Marko <robimarko@gmail.com>
Date: Sun, 19 Nov 2023 15:37:07 +0000 (+0100)
Subject: qualcommax: 301w: populate AQR firmware name
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fstintel.git;a=commitdiff_plain;h=137694eaffaeba94f0524fe3f9a5148f54d3cb8a

qualcommax: 301w: populate AQR firmware name

Now that we have support for firmware loading via the kernel driver, it
makes sense to populate the firmware name as well, so if its present the
driver can load it.

In later patches, loading the FW via NVMEM will be added as well.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
index a7d398ee0f..8ce22c1c06 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts
@@ -276,12 +276,14 @@
 		compatible ="ethernet-phy-ieee802.3-c45";
 		reg = <0>;
 		reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+		firmware-name = "marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld";
 	};
 
 	aqr113c_8: ethernet-phy@8 {
 		compatible ="ethernet-phy-ieee802.3-c45";
 		reg = <8>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+		firmware-name = "marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld";
 	};
 
 	qca8075_16: ethernet-phy@16 {