X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fstintel.git;a=blobdiff_plain;f=README;h=405c18bac06b1d9a7b119d1cbe32cccb2f434e24;hp=9301fe456e72f9d2affc9516f3ff1c8f8b5521ff;hb=HEAD;hpb=9f4b9328e7341db29fc593c44dd4f5d5988a74c4

diff --git a/README b/README
deleted file mode 100644
index 9301fe456e..0000000000
--- a/README
+++ /dev/null
@@ -1,35 +0,0 @@
-This is the buildsystem for the OpenWrt Linux distribution.
-
-Please use "make menuconfig" to configure your appreciated
-configuration for the toolchain and firmware.
-
-You need to have installed gcc, binutils, patch, bzip2, flex,
-make, gettext, pkg-config, unzip, libz-dev and libc headers.
-
-Run "./scripts/feeds update -a" to get all the latest package definitions
-defined in feeds.conf / feeds.conf.default respectively
-and "./scripts/feeds install -a" to install symlinks of all of them into
-package/feeds/.
-
-Use "make menuconfig" to configure your image.
-
-Simply running "make" will build your firmware.
-It will download all sources, build the cross-compile toolchain, 
-the kernel and all choosen applications.
-
-You can use "scripts/flashing/flash.sh" for remotely updating your embedded
-system via tftp.
-
-The OpenWrt system is documented in docs/. You will need a LaTeX distribution
-and the tex4ht package to build the documentation. Type "make -C docs/" to build it.
-
-To build your own firmware you need to have access to a Linux, BSD or MacOSX system
-(case-sensitive filesystem required). Cygwin will not be supported because of
-the lack of case sensitiveness in the file system.
-
-
-Sunshine!
-	Your OpenWrt Project
-	http://openwrt.org
-
-