* RT_ERR_SMI - SMI access error
* Note:
* Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200
- * for Q-in-Q SLAN design. User can set mathced ether type as service provider supported protocol
+ * for Q-in-Q SLAN design. User can set matched ether type as service provider supported protocol
*/
ret_t rtl8367c_setAsicSvlanTpid(rtk_uint32 protocolType)
{
/* Function Name:
* rtl8367c_setAsicSvlanIngressUntag
* Description:
- * Set action received un-Stag frame from unplink port
+ * Set action received un-Stag frame from uplink port
* Input:
* mode - 0:Drop 1:Trap 2:Assign SVLAN
* Output:
/* Function Name:
* rtl8367c_getAsicSvlanIngressUntag
* Description:
- * Get action received un-Stag frame from unplink port
+ * Get action received un-Stag frame from uplink port
* Input:
* pMode - 0:Drop 1:Trap 2:Assign SVLAN
* Output:
/* Function Name:
* rtl8367c_setAsicSvlanIngressUnmatch
* Description:
- * Set action received unmatched Stag frame from unplink port
+ * Set action received unmatched Stag frame from uplink port
* Input:
* mode - 0:Drop 1:Trap 2:Assign SVLAN
* Output:
/* Function Name:
* rtl8367c_getAsicSvlanIngressUnmatch
* Description:
- * Get action received unmatched Stag frame from unplink port
+ * Get action received unmatched Stag frame from uplink port
* Input:
* pMode - 0:Drop 1:Trap 2:Assign SVLAN
* Output:
/* Function Name:
* rtl8367c_setAsicSvlanEgressUnassign
* Description:
- * Set unplink stream without egress SVID action
+ * Set uplink stream without egress SVID action
* Input:
* enabled - 1:Trap egress unassigned frames to CPU, 0: Use SVLAN setup in VS_CPSVIDX as egress SVID
* Output:
/* Function Name:
* rtl8367c_getAsicSvlanEgressUnassign
* Description:
- * Get unplink stream without egress SVID action
+ * Get uplink stream without egress SVID action
* Input:
* pEnabled - 1:Trap egress unassigned frames to CPU, 0: Use SVLAN setup in VS_CPSVIDX as egress SVID
* Output:
* RT_ERR_SMI - SMI access error
* RT_ERR_ENTRY_INDEX - Invalid entry index
* Note:
- * ASIC will check upstream's VID and assign related SVID to mathed packet
+ * ASIC will check upstream's VID and assign related SVID to matched packet
*/
ret_t rtl8367c_setAsicSvlanC2SConf(rtk_uint32 index, rtk_uint32 evid, rtk_uint32 portmask, rtk_uint32 svidx)
{