ath79: add support for ALFA Network N2Q

[openwrt/staging/rmilecki.git] / target / linux / ath79 / dts / qca9531_alfa-network_r36a.dts

diff --git a/target/linux/ath79/dts/qca9531_alfa-network_r36a.dts b/target/linux/ath79/dts/qca9531_alfa-network_r36a.dts
index 18aaa85f5c1a69f8a5aa2544946fc5705f80ed03..0405e40839624ba26b29bf722d9dc90d4c40dcdf 100644 (file)
--- a/target/linux/ath79/dts/qca9531_alfa-network_r36a.dts
+++ b/target/linux/ath79/dts/qca9531_alfa-network_r36a.dts
@@ -1,57 +1,18 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca953x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca9531_alfa-network_r36a.dtsi"
 
 / {
        model = "ALFA Network R36A";
        compatible = "alfa-network,r36a", "qca,qca9531";
 
        aliases {
-               label-mac-device = &wmac;
                led-boot = &led_status;
                led-failsafe = &led_status;
                led-running = &led_status;
                led-upgrade = &led_status;
        };
 
-       gpio-export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               usb-power {
-                       gpio-export,name = "usb-power";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
-               };
-
-               watchdog-enable {
-                       gpio-export,name = "watchdog-enable";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               rfkill {
-                       label = "rfkill";
-                       linux,code = <KEY_RFKILL>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-
        leds {
                compatible = "gpio-leds";
 
@@ -86,20 +47,9 @@
                        linux,default-trigger = "phy0tpt";
                };
        };
-
-       watchdog {
-               compatible = "linux,wdt-gpio";
-               gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-               hw_algo = "toggle";
-               hw_margin_ms = <25000>;
-               always-running;
-       };
 };
 
 &eth0 {
-       status = "okay";
-
-       phy-handle = <&swphy4>;
        mtd-mac-address = <&art 0x0>;
 };
 
@@ -111,80 +61,19 @@
        mtd-mac-address = <&art 0x6>;
 };
 
-&pinmux {
-       enable_gpio4: pinmux_enable_gpio4 {
-               pinctrl-single,bits = <0x04 0x0 0xff>;
-       };
-
-       enable_gpio16: pinmux_enable_gpio16 {
-               pinctrl-single,bits = <0x10 0x0 0xff>;
-       };
-};
-
-&spi {
-       status = "okay";
-
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-               m25p,fast-read;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x060000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "u-boot-env";
-                               reg = <0x060000 0x010000>;
-                       };
-
-                       art: partition@70000 {
-                               label = "art";
-                               reg = <0x070000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@80000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x080000 0xf80000>;
-                       };
-               };
+&gpio_export {
+       usb-power {
+               gpio-export,name = "usb-power";
+               gpio-export,output = <1>;
+               gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
        };
 };
 
-&uart {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       hub_port0: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
+&keys {
+       rfkill {
+               label = "rfkill";
+               linux,code = <KEY_RFKILL>;
+               gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               debounce-interval = <60>;
        };
 };
-
-&usb_phy {
-       status = "okay";
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-};