ramips: split Phicomm PSG1218 and PSG1218K2C

[openwrt/staging/noltari.git] / target / linux / ramips / dts / PSG1218.dts

diff --git a/target/linux/ramips/dts/PSG1218.dts b/target/linux/ramips/dts/PSG1218.dts
index 1e53dcef3d07c50983dc0ac1278424788af2b008..0492d65502c95d5f1b62f661f33a550d50443391 100644 (file)
--- a/target/linux/ramips/dts/PSG1218.dts
+++ b/target/linux/ramips/dts/PSG1218.dts
@@ -1,8 +1,6 @@
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
+#include "PSG1218.dtsi"
 
 / {
        compatible = "PSG1218", "ralink,mt7620a-soc";
@@ -10,7 +8,6 @@
 
        gpio-leds {
                compatible = "gpio-leds";
-
                blue {
                        label = "psg1218:blue:status";
                        gpios = <&gpio0 10 1>;
@@ -23,59 +20,7 @@
 
                red {
                        label = "psg1218:red:status";
-                       gpios = <&gpio0 8 0>;
-               };
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-};
-
-&gpio0 {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@20000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@30000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@40000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
+                               gpios = <&gpio0 8 0>;
                };
        };
 };
@@ -83,14 +28,9 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
                        ralink,function = "gpio";
                };
-
-               pa {
-                       ralink,group = "pa";
-                       ralink,function = "pa";
-               };
        };
 };
 
@@ -100,20 +40,3 @@
        mtd-mac-address = <&factory 0x28>;
        mediatek,portmap = "llllw";
 };
-
-&pcie {
-       status = "okay";
-
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-               };
-       };
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-};