From: Robert Marko Date: Tue, 3 Mar 2020 19:19:30 +0000 (+0100) Subject: ipq40xx: 5.4: fix networking PHY driver X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fmkresin.git;a=commitdiff_plain;h=2b7344055bce2ac42c74e5eaa914c4adf780cf84 ipq40xx: 5.4: fix networking PHY driver In 5.4 kernel old u32 array way of setting network features was dropped and linkmode is now the only way. So lets migrate the PHY driver to support linkmode. Also, now in order for gigabit to work, PHY driver needs to advertise PHY_GBIT_FEATURES instead of PHY_BASIC_FEATURES Signed-off-by: Robert Marko --- diff --git a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch index 6df447fcd5..083de038a2 100644 --- a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch +++ b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch @@ -1837,8 +1837,8 @@ + if (phydev->mdio.addr == 0) + ar40xx_priv->phy = phydev; + -+ phydev->supported |= SUPPORTED_1000baseT_Full; -+ phydev->advertising |= ADVERTISED_1000baseT_Full; ++ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, phydev->supported); ++ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, phydev->advertising); + return 0; +} + @@ -1877,7 +1877,7 @@ + .phy_id = 0x004d0000, + .name = "QCA Malibu", + .phy_id_mask = 0xffff0000, -+ .features = PHY_BASIC_FEATURES, ++ .features = PHY_GBIT_FEATURES, + .probe = ar40xx_phy_probe, + .remove = ar40xx_phy_remove, + .config_init = ar40xx_phy_config_init, diff --git a/target/linux/ipq40xx/patches-5.4/706-ar40xx-abort-probe-on-missig-phy.patch b/target/linux/ipq40xx/patches-5.4/706-ar40xx-abort-probe-on-missig-phy.patch index cda05bfb9f..19474bff0d 100644 --- a/target/linux/ipq40xx/patches-5.4/706-ar40xx-abort-probe-on-missig-phy.patch +++ b/target/linux/ipq40xx/patches-5.4/706-ar40xx-abort-probe-on-missig-phy.patch @@ -1,16 +1,5 @@ --- a/drivers/net/phy/ar40xx.c +++ b/drivers/net/phy/ar40xx.c -@@ -1808,8 +1808,8 @@ ar40xx_phy_probe(struct phy_device *phyd - if (phydev->mdio.addr == 0) - ar40xx_priv->phy = phydev; - -- phydev->supported |= SUPPORTED_1000baseT_Full; -- phydev->advertising |= ADVERTISED_1000baseT_Full; -+ phy_set_max_speed(phydev, SPEED_1000); -+ linkmode_copy(phydev->advertising, phydev->supported); - return 0; - } - @@ -2021,6 +2021,12 @@ static int ar40xx_probe(struct platform_ /* register switch */ swdev = &priv->dev;