--- a/nl80211.h
+++ b/nl80211.h
-@@ -1817,6 +1817,11 @@ enum nl80211_commands {
- * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
- * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
+@@ -10,7 +10,7 @@
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+- * Copyright 2015 Intel Deutschland GmbH
++ * Copyright 2015-2017 Intel Deutschland GmbH
*
-+ * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+@@ -173,6 +173,65 @@
+ */
+
+ /**
++ * DOC: WPA/WPA2 EAPOL handshake offload
++ *
++ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
++ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
++ * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
++ * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
++ * this offload may reject the %NL80211_CMD_CONNECT when no preshared
++ * key material is provided, for example when that driver does not
++ * support setting the temporal keys through %CMD_NEW_KEY.
++ *
++ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
++ * set by drivers indicating offload support of the PTK/GTK EAPOL
++ * handshakes during 802.1X authentication. In order to use the offload
++ * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
++ * attribute flag. Drivers supporting this offload may reject the
++ * %NL80211_CMD_CONNECT when the attribute flag is not present.
++ *
++ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
++ * using %NL80211_CMD_SET_PMK. For offloaded FT support also
++ * %NL80211_ATTR_PMKR0_NAME must be provided.
++ */
++
++/**
++ * DOC: FILS shared key authentication offload
++ *
++ * FILS shared key authentication offload can be advertized by drivers by
++ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
++ * FILS shared key authentication offload should be able to construct the
++ * authentication and association frames for FILS shared key authentication and
++ * eventually do a key derivation as per IEEE 802.11ai. The below additional
++ * parameters should be given to driver in %NL80211_CMD_CONNECT.
++ * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
++ * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
++ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
++ * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
++ * rIK should be used to generate an authentication tag on the ERP message and
++ * rMSK should be used to derive a PMKSA.
++ * rIK, rMSK should be generated and keyname_nai, sequence number should be used
++ * as specified in IETF RFC 6696.
++ *
++ * When FILS shared key authentication is completed, driver needs to provide the
++ * below additional parameters to userspace.
++ * %NL80211_ATTR_FILS_KEK - used for key renewal
++ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
++ * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
++ * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
++ * The PMKSA can be maintained in userspace persistently so that it can be used
++ * later after reboots or wifi turn off/on also.
++ *
++ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
++ * capable AP supporting PMK caching. It specifies the scope within which the
++ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
++ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
++ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
++ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
++ * use in a FILS shared key connection with PMKSA caching.
++ */
++
++/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+@@ -323,7 +382,7 @@
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+- * probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to
++ * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
+ * specify a BSSID to scan for; if not included, the wildcard BSSID will
+ * be used.
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+@@ -351,7 +410,9 @@
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute. The first cycle of the
+ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
+- * is supplied.
++ * is supplied. If the device supports multiple concurrent scheduled
++ * scans, it will allow such when the caller provides the flag attribute
++ * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ * scheduled scan is not running. The caller may assume that as soon
+ * as the call returns, it is safe to start a new scheduled scan again.
+@@ -370,10 +431,18 @@
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
+- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
+- * (for the BSSID) and %NL80211_ATTR_PMKID.
++ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
++ * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
++ * (PMK is used for PTKSA derivation in case of FILS shared key offload) or
++ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
++ * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
++ * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
++ * advertized by a FILS capable AP identifying the scope of PMKSA in an
++ * ESS.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+- * (for the BSSID) and %NL80211_ATTR_PMKID.
++ * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
++ * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
++ * authentication.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+@@ -500,8 +569,13 @@
+ * authentication/association or not receiving a response from the AP.
+ * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ * well to remain backwards compatible.
+- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+- * sent as an event when the card/driver roamed by itself.
++ * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself.
++ * When the driver roamed in a network that requires 802.1X authentication,
++ * %NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication
++ * was done by the driver or if roaming was done using Fast Transition
++ * protocol (in which case 802.1X authentication is not needed). If
++ * %NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for
++ * the 802.1X authentication.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -600,6 +674,20 @@
+ *
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
++ * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
++ * multicast to unicast conversion. When enabled, all multicast packets
++ * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
++ * will be sent out to each station once with the destination (multicast)
++ * MAC address replaced by the station's MAC address. Note that this may
++ * break certain expectations of the receiver, e.g. the ability to drop
++ * unicast IP packets encapsulated in multicast L2 frames, or the ability
++ * to not send destination unreachable messages in such cases.
++ * This can only be toggled per BSS. Configure this on an interface of
++ * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
++ * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
++ * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
++ * command, the feature is disabled.
++ *
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ * mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+@@ -840,12 +928,15 @@
+ * cfg80211_scan_done().
+ *
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
+- * %NL80211_ATTR_WDEV interface. This interface must have been previously
+- * created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
+- * NAN interface will create or join a cluster. This command must have a
+- * valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+- * %NL80211_ATTR_NAN_DUAL attributes.
+- * After this command NAN functions can be added.
++ * %NL80211_ATTR_WDEV interface. This interface must have been
++ * previously created with %NL80211_CMD_NEW_INTERFACE. After it
++ * has been started, the NAN interface will create or join a
++ * cluster. This command must have a valid
++ * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
++ * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is
++ * omitted or set to 0, it means don't-care and the device will
++ * decide what to use. After this command NAN functions can be
++ * added.
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
+ * its %NL80211_ATTR_WDEV interface.
+ * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
+@@ -866,14 +957,32 @@
+ * This command is also used as a notification sent when a NAN function is
+ * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
+ * and %NL80211_ATTR_COOKIE attributes.
+- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
+- * must be operational (%NL80211_CMD_START_NAN was executed).
+- * It must contain at least one of the following attributes:
+- * %NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
++ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
++ * configuration. NAN must be operational (%NL80211_CMD_START_NAN
++ * was executed). It must contain at least one of the following
++ * attributes: %NL80211_ATTR_NAN_MASTER_PREF,
++ * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the
++ * current configuration is not changed. If it is present but
++ * set to zero, the configuration is changed to don't-care
++ * (i.e. the device can decide what to do).
+ * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
+ * %NL80211_ATTR_COOKIE.
+ *
++ * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
++ * for subsequent roaming cases if the driver or firmware uses internal
++ * BSS selection. This command can be issued only while connected and it
++ * does not result in a change for the current association. Currently,
++ * only the %NL80211_ATTR_IE data is used and updated with this command.
++ *
++ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
++ * for the given authenticator address (specified with &NL80211_ATTR_MAC).
++ * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
++ * PMK-R0, otherwise it specifies the PMK.
++ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
++ * configured PMK for the authenticator address identified by
++ * &NL80211_ATTR_MAC.
++ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+@@ -1069,6 +1178,13 @@ enum nl80211_commands {
+ NL80211_CMD_CHANGE_NAN_CONFIG,
+ NL80211_CMD_NAN_MATCH,
+
++ NL80211_CMD_SET_MULTICAST_TO_UNICAST,
++
++ NL80211_CMD_UPDATE_CONNECT_PARAMS,
++
++ NL80211_CMD_SET_PMK,
++ NL80211_CMD_DEL_PMK,
++
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+@@ -1638,8 +1754,16 @@ enum nl80211_commands {
+ * the connection request from a station. nl80211_connect_failed_reason
+ * enum has different reasons of connection failure.
+ *
+- * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
+- * with the Authentication transaction sequence number field.
++ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
++ * This contains the authentication frame body (non-IE and IE data),
++ * excluding the Authentication algorithm number, i.e., starting at the
++ * Authentication transaction sequence number field. It is used with
++ * authentication algorithms that need special fields to be added into
++ * the frames (SAE and FILS). Currently, only the SAE cases use the
++ * initial two fields (Authentication transaction sequence number and
++ * Status code). However, those fields are included in the attribute data
++ * for all authentication algorithms to keep the attribute definition
++ * consistent.
+ *
+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+@@ -1740,7 +1864,9 @@ enum nl80211_commands {
+ *
+ * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
+ * Notification Element based on association request when used with
+- * %NL80211_CMD_NEW_STATION; u8 attribute.
++ * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
++ * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
++ * u8 attribute.
+ *
+ * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
+ * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
+@@ -1783,11 +1909,12 @@ enum nl80211_commands {
+ * that configured the indoor setting, and the indoor operation would be
+ * cleared when the socket is closed.
+ * If set during NAN interface creation, the interface will be destroyed
+- * if the socket is closed just like any other interface. Moreover, only
+- * the netlink socket that created the interface will be allowed to add
+- * and remove functions. NAN notifications will be sent in unicast to that
+- * socket. Without this attribute, any socket can add functions and the
+- * notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
++ * if the socket is closed just like any other interface. Moreover, NAN
++ * notifications will be sent in unicast to that socket. Without this
++ * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
++ * multicast group.
++ * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
++ * station will deauthenticate when the socket is closed.
+ *
+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
+ * the TDLS link initiator.
+@@ -1927,15 +2054,93 @@ enum nl80211_commands {
+ * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
+ * Also, values 1 and 255 are reserved for certification purposes and
+ * should not be used during a normal device operation.
+- * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
+- * &enum nl80211_nan_dual_band_conf). This attribute is used with
+- * %NL80211_CMD_START_NAN and optionally with
+- * %NL80211_CMD_CHANGE_NAN_CONFIG.
++ * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32
++ * bitmask of BIT(NL80211_BAND_*) as described in %enum
++ * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0
++ * would be set. This attribute is used with
++ * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
++ * it is optional. If no bands are set, it means don't-care and
++ * the device will decide what to use.
+ * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
+ * &enum nl80211_nan_func_attributes for description of this nested
+ * attribute.
+ * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
+ * See &enum nl80211_nan_match_attributes.
++ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
++ * protection.
++ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
++ * Request/Response frame protection. This attribute contains the 16 octet
++ * STA Nonce followed by 16 octets of AP Nonce.
++ *
++ * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
++ * packets should be send out as unicast to all stations (flag attribute).
++ *
++ * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
++ * used in various commands/events for specifying the BSSID.
++ *
++ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
++ * other BSSs has to be better or slightly worse than the current
++ * connected BSS so that they get reported to user space.
++ * This will give an opportunity to userspace to consider connecting to
++ * other matching BSSs which have better or slightly worse RSSI than
++ * the current connected BSS by using an offloaded operation to avoid
++ * unnecessary wakeups.
++ *
++ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
++ * the specified band is to be adjusted before doing
++ * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
++ * better BSSs. The attribute value is a packed structure
++ * value as specified by &struct nl80211_bss_select_rssi_adjust.
++ *
++ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
++ * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
++ * e.g., with %NL80211_CMD_CONNECT event.
++ *
++ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
++ * username part of NAI used to refer keys rRK and rIK. This is used with
++ * %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
++ * of NAI specifying the domain name of the ER server. This is used with
++ * %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
++ * to use in ERP messages. This is used in generating the FILS wrapped data
++ * for FILS authentication and is used with %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
++ * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
++ * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
++ * from successful FILS authentication and is used with
++ * %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
++ * identifying the scope of PMKSAs. This is used with
++ * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
++ *
++ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
++ * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
++ * For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
++ * handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
++ * used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
++ * specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
++ *
++ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
++ * indicate that it supports multiple active scheduled scan requests.
++ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
++ * scan request that may be active for the device (u32).
++ *
++ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
++ * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
++ * wants to use the supported offload of the 4-way handshake.
++ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
++ * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED
++ * notification indicating that that 802.1X authentication was done by
++ * the driver or is not needed (because roaming used the Fast Transition
++ * protocol).
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
-+ *
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2197,6 +2202,10 @@ enum nl80211_attrs {
+@@ -2195,7 +2400,7 @@ enum nl80211_attrs {
+
+ NL80211_ATTR_CONN_FAILED_REASON,
+
+- NL80211_ATTR_SAE_DATA,
++ NL80211_ATTR_AUTH_DATA,
+
+ NL80211_ATTR_VHT_CAPABILITY,
- NL80211_ATTR_STA_SUPPORT_P2P_PS,
+@@ -2332,10 +2537,39 @@ enum nl80211_attrs {
+ NL80211_ATTR_MESH_PEER_AID,
-+ NL80211_ATTR_PAD,
+ NL80211_ATTR_NAN_MASTER_PREF,
+- NL80211_ATTR_NAN_DUAL,
++ NL80211_ATTR_BANDS,
+ NL80211_ATTR_NAN_FUNC,
+ NL80211_ATTR_NAN_MATCH,
+
++ NL80211_ATTR_FILS_KEK,
++ NL80211_ATTR_FILS_NONCES,
++
++ NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
++
++ NL80211_ATTR_BSSID,
++
++ NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
++ NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
++
++ NL80211_ATTR_TIMEOUT_REASON,
++
++ NL80211_ATTR_FILS_ERP_USERNAME,
++ NL80211_ATTR_FILS_ERP_REALM,
++ NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
++ NL80211_ATTR_FILS_ERP_RRK,
++ NL80211_ATTR_FILS_CACHE_ID,
++
++ NL80211_ATTR_PMK,
++
++ NL80211_ATTR_SCHED_SCAN_MULTI,
++ NL80211_ATTR_SCHED_SCAN_MAX_REQS,
++
++ NL80211_ATTR_WANT_1X_4WAY_HS,
++ NL80211_ATTR_PMKR0_NAME,
++ NL80211_ATTR_PORT_AUTHORIZED,
+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -2513,6 +2522,7 @@ enum nl80211_sta_bss_param {
- * attributes carrying the actual values.
- * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
- * received from the station (u64, usec)
-+ * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-@@ -2550,6 +2560,7 @@ enum nl80211_sta_info {
- NL80211_STA_INFO_BEACON_SIGNAL_AVG,
- NL80211_STA_INFO_TID_STATS,
- NL80211_STA_INFO_RX_DURATION,
-+ NL80211_STA_INFO_PAD,
+@@ -2347,6 +2581,7 @@ enum nl80211_attrs {
+ #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+ #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+ #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
++#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
+
+ /*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+@@ -3019,6 +3254,7 @@ enum nl80211_reg_rule_attr {
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
++ * (This cannot be used together with BSSID.)
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+ * BSS in scan results. Filtering is turned off if not specified. Note that
+ * if this attribute is in a match set of its own, then it is treated as
+@@ -3027,6 +3263,15 @@ enum nl80211_reg_rule_attr {
+ * how this API was implemented in the past. Also, due to the same problem,
+ * the only way to create a matchset with only an RSSI filter (with this
+ * attribute) is if there's only a single matchset with the RSSI attribute.
++ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
++ * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
++ * relative to current bss's RSSI.
++ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
++ * BSS-es in the specified band is to be adjusted before doing
++ * RSSI-based BSS selection. The attribute value is a packed structure
++ * value as specified by &struct nl80211_bss_select_rssi_adjust.
++ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
++ * (this cannot be used together with SSID).
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+@@ -3036,6 +3281,9 @@ enum nl80211_sched_scan_match_attr {
+
+ NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
++ NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
++ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
++ NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+@@ -3660,6 +3908,9 @@ enum nl80211_bss_status {
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
++ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
++ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
++ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+@@ -3672,6 +3923,9 @@ enum nl80211_auth_type {
+ NL80211_AUTHTYPE_FT,
+ NL80211_AUTHTYPE_NETWORK_EAP,
+ NL80211_AUTHTYPE_SAE,
++ NL80211_AUTHTYPE_FILS_SK,
++ NL80211_AUTHTYPE_FILS_SK_PFS,
++ NL80211_AUTHTYPE_FILS_PK,
/* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
-@@ -2566,6 +2577,7 @@ enum nl80211_sta_info {
- * transmitted MSDUs (not counting the first attempt; u64)
- * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
- * MSDUs (u64)
-+ * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
- * @NUM_NL80211_TID_STATS: number of attributes here
- * @NL80211_TID_STATS_MAX: highest numbered attribute here
+ __NL80211_AUTHTYPE_NUM,
+@@ -3839,7 +4093,10 @@ enum nl80211_ps_state {
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ * the threshold for the RSSI level at which an event will be sent. Zero
+- * to disable.
++ * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
++ * set, multiple values can be supplied as a low-to-high sorted array of
++ * threshold values in dBm. Events will be sent when the RSSI value
++ * crosses any of the thresholds.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ * the minimum amount the RSSI level must change after an event before a
+ * new event may be issued (to reduce effects of RSSI oscillation).
+@@ -3859,6 +4116,8 @@ enum nl80211_ps_state {
+ * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
+ * loss event
++ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
++ * RSSI threshold event.
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
*/
-@@ -2575,6 +2587,7 @@ enum nl80211_tid_stats {
- NL80211_TID_STATS_TX_MSDU,
- NL80211_TID_STATS_TX_MSDU_RETRIES,
- NL80211_TID_STATS_TX_MSDU_FAILED,
-+ NL80211_TID_STATS_PAD,
+@@ -3872,6 +4131,7 @@ enum nl80211_attr_cqm {
+ NL80211_ATTR_CQM_TXE_PKTS,
+ NL80211_ATTR_CQM_TXE_INTVL,
+ NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
++ NL80211_ATTR_CQM_RSSI_LEVEL,
/* keep last */
- NUM_NL80211_TID_STATS,
-@@ -3011,6 +3024,7 @@ enum nl80211_user_reg_hint_type {
- * transmitting data (on channel or globally)
- * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
- * (on this channel or globally)
-+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- * currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -3026,6 +3040,7 @@ enum nl80211_survey_info {
- NL80211_SURVEY_INFO_TIME_RX,
- NL80211_SURVEY_INFO_TIME_TX,
- NL80211_SURVEY_INFO_TIME_SCAN,
-+ NL80211_SURVEY_INFO_PAD,
+ __NL80211_ATTR_CQM_AFTER_LAST,
+@@ -4280,6 +4540,9 @@ enum nl80211_iface_limit_attrs {
+ * of supported channel widths for radar detection.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
+ * of supported regulatory regions for radar detection.
++ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
++ * different beacon intervals supported by all the interface combinations
++ * in this group (if not present, all beacon intervals be identical).
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+@@ -4287,8 +4550,8 @@ enum nl80211_iface_limit_attrs {
+ * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ * => allows an AP and a STA that must match BIs
+ *
+- * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+- * => allows 8 of AP/GO
++ * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
++ * => allows 8 of AP/GO that can have BI gcd >= min gcd
+ *
+ * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ * => allows two STAs on different channels
+@@ -4314,6 +4577,7 @@ enum nl80211_if_combination_attrs {
+ NL80211_IFACE_COMB_NUM_CHANNELS,
+ NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
+ NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
++ NL80211_IFACE_COMB_BI_MIN_GCD,
/* keep last */
- __NL80211_SURVEY_INFO_AFTER_LAST,
-@@ -3451,6 +3466,7 @@ enum nl80211_bss_scan_width {
- * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
- * was last updated by a received frame. The value is expected to be
- * accurate to about 10ms. (u64, nanoseconds)
-+ * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
+ NUM_NL80211_IFACE_COMB,
+@@ -4634,6 +4898,27 @@ enum nl80211_feature_flags {
+ * configuration (AP/mesh) with HT rates.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
+ * configuration (AP/mesh) with VHT rates.
++ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
++ * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
++ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
++ * in @NL80211_CMD_FRAME while not associated.
++ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
++ * randomized TA in @NL80211_CMD_FRAME while associated.
++ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
++ * for reporting BSSs with better RSSI than the current connected BSS
++ * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
++ * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
++ * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
++ * RSSI threshold values to monitor rather than exactly one threshold.
++ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
++ * authentication with %NL80211_CMD_CONNECT.
++ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
++ * handshake with PSK in station mode (PSK is passed as part of the connect
++ * and associate commands), doing it in the host might not be supported.
++ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
++ * handshake with 802.1X in station mode (will pass EAP frames to the host
++ * and accept the set_pmk/del_pmk commands), doing it in the host might not
++ * be supported.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+@@ -4648,6 +4933,14 @@ enum nl80211_ext_feature_index {
+ NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+ NL80211_EXT_FEATURE_BEACON_RATE_HT,
+ NL80211_EXT_FEATURE_BEACON_RATE_VHT,
++ NL80211_EXT_FEATURE_FILS_STA,
++ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
++ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
++ NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
++ NL80211_EXT_FEATURE_CQM_RSSI_LIST,
++ NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
++ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
++ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+@@ -4687,6 +4980,21 @@ enum nl80211_connect_failed_reason {
+ };
+
+ /**
++ * enum nl80211_timeout_reason - timeout reasons
++ *
++ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
++ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
++ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
++ * @NL80211_TIMEOUT_ASSOC: Association timed out.
++ */
++enum nl80211_timeout_reason {
++ NL80211_TIMEOUT_UNSPECIFIED,
++ NL80211_TIMEOUT_SCAN,
++ NL80211_TIMEOUT_AUTH,
++ NL80211_TIMEOUT_ASSOC,
++};
++
++/**
+ * enum nl80211_scan_flags - scan request control flags
+ *
+ * Scan request control flags are used to control the handling
+@@ -4768,12 +5076,17 @@ enum nl80211_smps_mode {
+ * change to the channel status.
+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
+ * over, channel becomes usable.
++ * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
++ * non-operating channel is expired and no longer valid. New CAC must
++ * be done on this channel before starting the operation. This is not
++ * applicable for ETSI dfs domain where pre-CAC is valid for ever.
*/
-@@ -3471,6 +3487,7 @@ enum nl80211_bss {
- NL80211_BSS_BEACON_TSF,
- NL80211_BSS_PRESP_DATA,
- NL80211_BSS_LAST_SEEN_BOOTTIME,
-+ NL80211_BSS_PAD,
+ enum nl80211_radar_event {
+ NL80211_RADAR_DETECTED,
+ NL80211_RADAR_CAC_FINISHED,
+ NL80211_RADAR_CAC_ABORTED,
+ NL80211_RADAR_NOP_FINISHED,
++ NL80211_RADAR_PRE_CAC_EXPIRED,
+ };
- /* keep last */
- __NL80211_BSS_AFTER_LAST,
+ /**
+@@ -4900,8 +5213,9 @@ enum nl80211_sched_scan_plan {
+ /**
+ * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
+ *
+- * @band: band of BSS that must match for RSSI value adjustment.
+- * @delta: value used to adjust the RSSI value of matching BSS.
++ * @band: band of BSS that must match for RSSI value adjustment. The value
++ * of this field is according to &enum nl80211_band.
++ * @delta: value used to adjust the RSSI value of matching BSS in dB.
+ */
+ struct nl80211_bss_select_rssi_adjust {
+ __u8 band;
+@@ -4942,21 +5256,6 @@ enum nl80211_bss_select_attr {
+ };
+
+ /**
+- * enum nl80211_nan_dual_band_conf - NAN dual band configuration
+- *
+- * Defines the NAN dual band mode of operation
+- *
+- * @NL80211_NAN_BAND_DEFAULT: device default mode
+- * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
+- * @NL80211_NAN_BAND_5GHZ: 5GHz mode
+- */
+-enum nl80211_nan_dual_band_conf {
+- NL80211_NAN_BAND_DEFAULT = 1 << 0,
+- NL80211_NAN_BAND_2GHZ = 1 << 1,
+- NL80211_NAN_BAND_5GHZ = 1 << 2,
+-};
+-
+-/**
+ * enum nl80211_nan_function_type - NAN function type
+ *
+ * Defines the function type of a NAN function