From: Rafał Miłecki Date: Fri, 26 Jan 2024 05:35:27 +0000 (+0100) Subject: kernel: 5.15: backport v6.1 PHY changes required for Aquantia X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fjow.git;a=commitdiff_plain;h=2df8a0ccb0b0461836e3ab88c7d4dc848664def4 kernel: 5.15: backport v6.1 PHY changes required for Aquantia Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/generic/backport-5.15/731-v6.1-0001-net-phy-Introduce-QUSGMII-PHY-mode.patch b/target/linux/generic/backport-5.15/731-v6.1-0001-net-phy-Introduce-QUSGMII-PHY-mode.patch new file mode 100644 index 0000000000..40b14fc36a --- /dev/null +++ b/target/linux/generic/backport-5.15/731-v6.1-0001-net-phy-Introduce-QUSGMII-PHY-mode.patch @@ -0,0 +1,99 @@ +From 5e61fe157a27afc7c0d4f7bcbceefdca536c015f Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier +Date: Wed, 17 Aug 2022 14:32:52 +0200 +Subject: [PATCH] net: phy: Introduce QUSGMII PHY mode + +The QUSGMII mode is a derivative of Cisco's USXGMII standard. This +standard is pretty similar to SGMII, but allows for faster speeds, and +has the build-in bits for Quad and Octa variants (like QSGMII). + +The main difference with SGMII/QSGMII is that USXGMII/QUSGMII re-uses +the preamble to carry various information, named 'Extensions'. + +As of today, the USXGMII standard only mentions the "PCH" extension, +which is used to convey timestamps, allowing in-band signaling of PTP +timestamps without having to modify the frame itself. + +This commit adds support for that mode. When no extension is in use, it +behaves exactly like QSGMII, although it's not compatible with QSGMII. + +Signed-off-by: Maxime Chevallier +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + Documentation/networking/phy.rst | 9 +++++++++ + drivers/net/phy/phylink.c | 3 +++ + include/linux/phy.h | 4 ++++ + 3 files changed, 16 insertions(+) + +--- a/Documentation/networking/phy.rst ++++ b/Documentation/networking/phy.rst +@@ -303,6 +303,15 @@ Some of the interface modes are describe + rate of 125Mpbs using a 4B/5B encoding scheme, resulting in an underlying + data rate of 100Mpbs. + ++``PHY_INTERFACE_MODE_QUSGMII`` ++ This defines the Cisco the Quad USGMII mode, which is the Quad variant of ++ the USGMII (Universal SGMII) link. It's very similar to QSGMII, but uses ++ a Packet Control Header (PCH) instead of the 7 bytes preamble to carry not ++ only the port id, but also so-called "extensions". The only documented ++ extension so-far in the specification is the inclusion of timestamps, for ++ PTP-enabled PHYs. This mode isn't compatible with QSGMII, but offers the ++ same capabilities in terms of link speed and negociation. ++ + Pause frames / flow control + =========================== + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -367,6 +367,7 @@ void phylink_get_linkmodes(unsigned long + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_QSGMII: ++ case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_GMII: + caps |= MAC_1000HD | MAC_1000FD; +@@ -630,6 +631,7 @@ static int phylink_parse_mode(struct phy + switch (pl->link_config.interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: ++ case PHY_INTERFACE_MODE_QUSGMII: + phylink_set(pl->supported, 10baseT_Half); + phylink_set(pl->supported, 10baseT_Full); + phylink_set(pl->supported, 100baseT_Half); +@@ -2956,6 +2958,7 @@ void phylink_mii_c22_pcs_get_state(struc + + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: ++ case PHY_INTERFACE_MODE_QUSGMII: + phylink_decode_sgmii_word(state, lpa); + break; + +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -115,6 +115,7 @@ extern const int phy_10gbit_features_arr + * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR + * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII + * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN ++ * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII + * @PHY_INTERFACE_MODE_MAX: Book keeping + * + * Describes the interface between the MAC and PHY. +@@ -152,6 +153,7 @@ typedef enum { + PHY_INTERFACE_MODE_USXGMII, + /* 10GBASE-KR - with Clause 73 AN */ + PHY_INTERFACE_MODE_10GKR, ++ PHY_INTERFACE_MODE_QUSGMII, + PHY_INTERFACE_MODE_MAX, + } phy_interface_t; + +@@ -267,6 +269,8 @@ static inline const char *phy_modes(phy_ + return "10gbase-kr"; + case PHY_INTERFACE_MODE_100BASEX: + return "100base-x"; ++ case PHY_INTERFACE_MODE_QUSGMII: ++ return "qusgmii"; + default: + return "unknown"; + } diff --git a/target/linux/generic/backport-5.15/731-v6.1-0002-net-phy-Add-helper-to-derive-the-number-of-ports-fro.patch b/target/linux/generic/backport-5.15/731-v6.1-0002-net-phy-Add-helper-to-derive-the-number-of-ports-fro.patch new file mode 100644 index 0000000000..a9706af893 --- /dev/null +++ b/target/linux/generic/backport-5.15/731-v6.1-0002-net-phy-Add-helper-to-derive-the-number-of-ports-fro.patch @@ -0,0 +1,93 @@ +From c04ade27cb7b952b6b9b9a0efa0a6129cc63f2ae Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier +Date: Wed, 17 Aug 2022 14:32:54 +0200 +Subject: [PATCH] net: phy: Add helper to derive the number of ports from a phy + mode + +Some phy modes such as QSGMII multiplex several MAC<->PHY links on one +single physical interface. QSGMII used to be the only one supported, but +other modes such as QUSGMII also carry multiple links. + +This helper allows getting the number of links that are multiplexed +on a given interface. + +Signed-off-by: Maxime Chevallier +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/phy-core.c | 52 ++++++++++++++++++++++++++++++++++++++ + include/linux/phy.h | 2 ++ + 2 files changed, 54 insertions(+) + +--- a/drivers/net/phy/phy-core.c ++++ b/drivers/net/phy/phy-core.c +@@ -74,6 +74,58 @@ const char *phy_duplex_to_str(unsigned i + } + EXPORT_SYMBOL_GPL(phy_duplex_to_str); + ++/** ++ * phy_interface_num_ports - Return the number of links that can be carried by ++ * a given MAC-PHY physical link. Returns 0 if this is ++ * unknown, the number of links else. ++ * ++ * @interface: The interface mode we want to get the number of ports ++ */ ++int phy_interface_num_ports(phy_interface_t interface) ++{ ++ switch (interface) { ++ case PHY_INTERFACE_MODE_NA: ++ return 0; ++ case PHY_INTERFACE_MODE_INTERNAL: ++ case PHY_INTERFACE_MODE_MII: ++ case PHY_INTERFACE_MODE_GMII: ++ case PHY_INTERFACE_MODE_TBI: ++ case PHY_INTERFACE_MODE_REVMII: ++ case PHY_INTERFACE_MODE_RMII: ++ case PHY_INTERFACE_MODE_REVRMII: ++ case PHY_INTERFACE_MODE_RGMII: ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ case PHY_INTERFACE_MODE_RTBI: ++ case PHY_INTERFACE_MODE_XGMII: ++ case PHY_INTERFACE_MODE_XLGMII: ++ case PHY_INTERFACE_MODE_MOCA: ++ case PHY_INTERFACE_MODE_TRGMII: ++ case PHY_INTERFACE_MODE_USXGMII: ++ case PHY_INTERFACE_MODE_SGMII: ++ case PHY_INTERFACE_MODE_SMII: ++ case PHY_INTERFACE_MODE_1000BASEX: ++ case PHY_INTERFACE_MODE_2500BASEX: ++ case PHY_INTERFACE_MODE_5GBASER: ++ case PHY_INTERFACE_MODE_10GBASER: ++ case PHY_INTERFACE_MODE_25GBASER: ++ case PHY_INTERFACE_MODE_10GKR: ++ case PHY_INTERFACE_MODE_100BASEX: ++ case PHY_INTERFACE_MODE_RXAUI: ++ case PHY_INTERFACE_MODE_XAUI: ++ return 1; ++ case PHY_INTERFACE_MODE_QSGMII: ++ case PHY_INTERFACE_MODE_QUSGMII: ++ return 4; ++ case PHY_INTERFACE_MODE_MAX: ++ WARN_ONCE(1, "PHY_INTERFACE_MODE_MAX isn't a valid interface mode"); ++ return 0; ++ } ++ return 0; ++} ++EXPORT_SYMBOL_GPL(phy_interface_num_ports); ++ + /* A mapping of all SUPPORTED settings to speed/duplex. This table + * must be grouped by speed and sorted in descending match priority + * - iow, descending speed. +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -964,6 +964,8 @@ struct phy_fixup { + const char *phy_speed_to_str(int speed); + const char *phy_duplex_to_str(unsigned int duplex); + ++int phy_interface_num_ports(phy_interface_t interface); ++ + /* A structure for mapping a particular speed and duplex + * combination to a particular SUPPORTED and ADVERTISED value + */ diff --git a/target/linux/generic/backport-5.15/731-v6.1-0003-net-phy-Add-1000BASE-KX-interface-mode.patch b/target/linux/generic/backport-5.15/731-v6.1-0003-net-phy-Add-1000BASE-KX-interface-mode.patch new file mode 100644 index 0000000000..70669dde3a --- /dev/null +++ b/target/linux/generic/backport-5.15/731-v6.1-0003-net-phy-Add-1000BASE-KX-interface-mode.patch @@ -0,0 +1,96 @@ +From 05ad5d4581c3c1cc724fe50d4652833fb9f3037b Mon Sep 17 00:00:00 2001 +From: Sean Anderson +Date: Fri, 2 Sep 2022 18:02:39 -0400 +Subject: [PATCH] net: phy: Add 1000BASE-KX interface mode + +Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in +clause 70. Clause 73 autonegotiation is mandatory, and only full duplex +operation is supported. + +Although at the PMA level this interface mode is identical to +1000BASE-X, it uses a different form of in-band autonegation. This +justifies a separate interface mode, since the interface mode (along +with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation +which will be used on a link. This results in more than just electrical +differences between the link modes. + +With regard to 1000BASE-X, 1000BASE-KX holds a similar position to +SGMII: same signaling, but different autonegotiation. PCS drivers +(which typically handle in-band autonegotiation) may only support +1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to +configure serdes phys with phy_set_mode_ext. Due to the different +electrical standards (SFI or XFI vs Clause 70), they will likely want to +use different configuration. Adding a phy interface mode for +1000BASE-KX helps simplify configuration in these areas. + +Signed-off-by: Sean Anderson +Signed-off-by: David S. Miller +--- + Documentation/networking/phy.rst | 6 ++++++ + drivers/net/phy/phy-core.c | 1 + + drivers/net/phy/phylink.c | 1 + + include/linux/phy.h | 4 ++++ + 4 files changed, 12 insertions(+) + +--- a/Documentation/networking/phy.rst ++++ b/Documentation/networking/phy.rst +@@ -312,6 +312,12 @@ Some of the interface modes are describe + PTP-enabled PHYs. This mode isn't compatible with QSGMII, but offers the + same capabilities in terms of link speed and negociation. + ++``PHY_INTERFACE_MODE_1000BASEKX`` ++ This is 1000BASE-X as defined by IEEE 802.3 Clause 36 with Clause 73 ++ autonegotiation. Generally, it will be used with a Clause 70 PMD. To ++ contrast with the 1000BASE-X phy mode used for Clause 38 and 39 PMDs, this ++ interface mode has different autonegotiation and only supports full duplex. ++ + Pause frames / flow control + =========================== + +--- a/drivers/net/phy/phy-core.c ++++ b/drivers/net/phy/phy-core.c +@@ -114,6 +114,7 @@ int phy_interface_num_ports(phy_interfac + case PHY_INTERFACE_MODE_100BASEX: + case PHY_INTERFACE_MODE_RXAUI: + case PHY_INTERFACE_MODE_XAUI: ++ case PHY_INTERFACE_MODE_1000BASEKX: + return 1; + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -390,6 +390,7 @@ void phylink_get_linkmodes(unsigned long + case PHY_INTERFACE_MODE_1000BASEX: + caps |= MAC_1000HD; + fallthrough; ++ case PHY_INTERFACE_MODE_1000BASEKX: + case PHY_INTERFACE_MODE_TRGMII: + caps |= MAC_1000FD; + break; +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -116,6 +116,7 @@ extern const int phy_10gbit_features_arr + * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII + * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN + * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII ++ * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN + * @PHY_INTERFACE_MODE_MAX: Book keeping + * + * Describes the interface between the MAC and PHY. +@@ -154,6 +155,7 @@ typedef enum { + /* 10GBASE-KR - with Clause 73 AN */ + PHY_INTERFACE_MODE_10GKR, + PHY_INTERFACE_MODE_QUSGMII, ++ PHY_INTERFACE_MODE_1000BASEKX, + PHY_INTERFACE_MODE_MAX, + } phy_interface_t; + +@@ -251,6 +253,8 @@ static inline const char *phy_modes(phy_ + return "trgmii"; + case PHY_INTERFACE_MODE_1000BASEX: + return "1000base-x"; ++ case PHY_INTERFACE_MODE_1000BASEKX: ++ return "1000base-kx"; + case PHY_INTERFACE_MODE_2500BASEX: + return "2500base-x"; + case PHY_INTERFACE_MODE_5GBASER: diff --git a/target/linux/generic/backport-5.15/731-v6.1-0004-net-phy-Add-support-for-rate-matching.patch b/target/linux/generic/backport-5.15/731-v6.1-0004-net-phy-Add-support-for-rate-matching.patch new file mode 100644 index 0000000000..fc02d7a4ea --- /dev/null +++ b/target/linux/generic/backport-5.15/731-v6.1-0004-net-phy-Add-support-for-rate-matching.patch @@ -0,0 +1,294 @@ +From 0c3e10cb44232833a50cb8e3e784c432906a60c1 Mon Sep 17 00:00:00 2001 +From: Sean Anderson +Date: Tue, 20 Sep 2022 18:12:31 -0400 +Subject: [PATCH] net: phy: Add support for rate matching + +This adds support for rate matching (also known as rate adaptation) to +the phy subsystem. The general idea is that the phy interface runs at +one speed, and the MAC throttles the rate at which it sends packets to +the link speed. There's a good overview of several techniques for +achieving this at [1]. This patch adds support for three: pause-frame +based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and +2BASE-TL), and open-loop-based (such as in 10GBASE-W). + +This patch makes a few assumptions and a few non assumptions about the +types of rate matching available. First, it assumes that different phys +may use different forms of rate matching. Second, it assumes that phys +can use rate matching for any of their supported link speeds (e.g. if a +phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T). +Third, it does not assume that all interface modes will use the same +form of rate matching. Fourth, it does not assume that all phy devices +will support rate matching (even if some do). Relaxing or strengthening +these (non-)assumptions could result in a different API. For example, if +all interface modes were assumed to use the same form of rate matching, +then a bitmask of interface modes supportting rate matching would +suffice. + +For some better visibility into the process, the current rate matching +mode is exposed as part of the ethtool ksettings. For the moment, only +read access is supported. I'm not sure what userspace might want to +configure yet (disable it altogether, disable just one mode, specify the +mode to use, etc.). For the moment, since only pause-based rate +adaptation support is added in the next few commits, rate matching can +be disabled altogether by adjusting the advertisement. + +802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and +"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls +this feature "rate adaptation". I chose "rate matching" because it is +shorter, and because Russell doesn't think "adaptation" is correct in this +context. + +Signed-off-by: Sean Anderson +Signed-off-by: David S. Miller +--- + Documentation/networking/ethtool-netlink.rst | 2 ++ + drivers/net/phy/phy-core.c | 21 +++++++++++++++ + drivers/net/phy/phy.c | 28 ++++++++++++++++++++ + include/linux/phy.h | 22 ++++++++++++++- + include/uapi/linux/ethtool.h | 18 +++++++++++-- + include/uapi/linux/ethtool_netlink.h | 1 + + net/ethtool/ioctl.c | 1 + + net/ethtool/linkmodes.c | 5 ++++ + 8 files changed, 95 insertions(+), 3 deletions(-) + +--- a/Documentation/networking/ethtool-netlink.rst ++++ b/Documentation/networking/ethtool-netlink.rst +@@ -418,6 +418,7 @@ Kernel response contents: + ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state ++ ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching + ========================================== ====== ========================== + + For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask +@@ -441,6 +442,7 @@ Request contents: + ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) + ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode + ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode ++ ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching + ``ETHTOOL_A_LINKMODES_LANES`` u32 lanes + ========================================== ====== ========================== + +--- a/drivers/net/phy/phy-core.c ++++ b/drivers/net/phy/phy-core.c +@@ -75,6 +75,27 @@ const char *phy_duplex_to_str(unsigned i + EXPORT_SYMBOL_GPL(phy_duplex_to_str); + + /** ++ * phy_rate_matching_to_str - Return a string describing the rate matching ++ * ++ * @rate_matching: Type of rate matching to describe ++ */ ++const char *phy_rate_matching_to_str(int rate_matching) ++{ ++ switch (rate_matching) { ++ case RATE_MATCH_NONE: ++ return "none"; ++ case RATE_MATCH_PAUSE: ++ return "pause"; ++ case RATE_MATCH_CRS: ++ return "crs"; ++ case RATE_MATCH_OPEN_LOOP: ++ return "open-loop"; ++ } ++ return "Unsupported (update phy-core.c)"; ++} ++EXPORT_SYMBOL_GPL(phy_rate_matching_to_str); ++ ++/** + * phy_interface_num_ports - Return the number of links that can be carried by + * a given MAC-PHY physical link. Returns 0 if this is + * unknown, the number of links else. +--- a/drivers/net/phy/phy.c ++++ b/drivers/net/phy/phy.c +@@ -127,6 +127,33 @@ void phy_print_status(struct phy_device + EXPORT_SYMBOL(phy_print_status); + + /** ++ * phy_get_rate_matching - determine if rate matching is supported ++ * @phydev: The phy device to return rate matching for ++ * @iface: The interface mode to use ++ * ++ * This determines the type of rate matching (if any) that @phy supports ++ * using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any ++ * interface supports rate matching. ++ * ++ * Return: The type of rate matching @phy supports for @iface, or ++ * %RATE_MATCH_NONE. ++ */ ++int phy_get_rate_matching(struct phy_device *phydev, ++ phy_interface_t iface) ++{ ++ int ret = RATE_MATCH_NONE; ++ ++ if (phydev->drv->get_rate_matching) { ++ mutex_lock(&phydev->lock); ++ ret = phydev->drv->get_rate_matching(phydev, iface); ++ mutex_unlock(&phydev->lock); ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(phy_get_rate_matching); ++ ++/** + * phy_config_interrupt - configure the PHY device for the requested interrupts + * @phydev: the phy_device struct + * @interrupts: interrupt flags to configure for this @phydev +@@ -268,6 +295,7 @@ void phy_ethtool_ksettings_get(struct ph + cmd->base.duplex = phydev->duplex; + cmd->base.master_slave_cfg = phydev->master_slave_get; + cmd->base.master_slave_state = phydev->master_slave_state; ++ cmd->base.rate_matching = phydev->rate_matching; + if (phydev->interface == PHY_INTERFACE_MODE_MOCA) + cmd->base.port = PORT_BNC; + else +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -280,7 +280,6 @@ static inline const char *phy_modes(phy_ + } + } + +- + #define PHY_INIT_TIMEOUT 100000 + #define PHY_FORCE_TIMEOUT 10 + +@@ -573,6 +572,7 @@ struct macsec_ops; + * @lp_advertising: Current link partner advertised linkmodes + * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited + * @autoneg: Flag autoneg being used ++ * @rate_matching: Current rate matching mode + * @link: Current link state + * @autoneg_complete: Flag auto negotiation of the link has completed + * @mdix: Current crossover +@@ -639,6 +639,8 @@ struct phy_device { + unsigned irq_suspended:1; + unsigned irq_rerun:1; + ++ int rate_matching; ++ + enum phy_state state; + + u32 dev_flags; +@@ -801,6 +803,21 @@ struct phy_driver { + */ + int (*get_features)(struct phy_device *phydev); + ++ /** ++ * @get_rate_matching: Get the supported type of rate matching for a ++ * particular phy interface. This is used by phy consumers to determine ++ * whether to advertise lower-speed modes for that interface. It is ++ * assumed that if a rate matching mode is supported on an interface, ++ * then that interface's rate can be adapted to all slower link speeds ++ * supported by the phy. If iface is %PHY_INTERFACE_MODE_NA, and the phy ++ * supports any kind of rate matching for any interface, then it must ++ * return that rate matching mode (preferring %RATE_MATCH_PAUSE to ++ * %RATE_MATCH_CRS). If the interface is not supported, this should ++ * return %RATE_MATCH_NONE. ++ */ ++ int (*get_rate_matching)(struct phy_device *phydev, ++ phy_interface_t iface); ++ + /* PHY Power Management */ + /** @suspend: Suspend the hardware, saving state if needed */ + int (*suspend)(struct phy_device *phydev); +@@ -967,6 +984,7 @@ struct phy_fixup { + + const char *phy_speed_to_str(int speed); + const char *phy_duplex_to_str(unsigned int duplex); ++const char *phy_rate_matching_to_str(int rate_matching); + + int phy_interface_num_ports(phy_interface_t interface); + +@@ -1675,6 +1693,8 @@ int phy_disable_interrupts(struct phy_de + void phy_request_interrupt(struct phy_device *phydev); + void phy_free_interrupt(struct phy_device *phydev); + void phy_print_status(struct phy_device *phydev); ++int phy_get_rate_matching(struct phy_device *phydev, ++ phy_interface_t iface); + int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); + void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode); + void phy_advertise_supported(struct phy_device *phydev); +--- a/include/uapi/linux/ethtool.h ++++ b/include/uapi/linux/ethtool.h +@@ -1809,6 +1809,20 @@ static inline int ethtool_validate_duple + #define MASTER_SLAVE_STATE_SLAVE 3 + #define MASTER_SLAVE_STATE_ERR 4 + ++/* These are used to throttle the rate of data on the phy interface when the ++ * native speed of the interface is higher than the link speed. These should ++ * not be used for phy interfaces which natively support multiple speeds (e.g. ++ * MII or SGMII). ++ */ ++/* No rate matching performed. */ ++#define RATE_MATCH_NONE 0 ++/* The phy sends pause frames to throttle the MAC. */ ++#define RATE_MATCH_PAUSE 1 ++/* The phy asserts CRS to prevent the MAC from transmitting. */ ++#define RATE_MATCH_CRS 2 ++/* The MAC is programmed with a sufficiently-large IPG. */ ++#define RATE_MATCH_OPEN_LOOP 3 ++ + /* Which connector port. */ + #define PORT_TP 0x00 + #define PORT_AUI 0x01 +@@ -2002,8 +2016,8 @@ enum ethtool_reset_flags { + * reported consistently by PHYLIB. Read-only. + * @master_slave_cfg: Master/slave port mode. + * @master_slave_state: Master/slave port state. ++ * @rate_matching: Rate adaptation performed by the PHY + * @reserved: Reserved for future use; see the note on reserved space. +- * @reserved1: Reserved for future use; see the note on reserved space. + * @link_mode_masks: Variable length bitmaps. + * + * If autonegotiation is disabled, the speed and @duplex represent the +@@ -2054,7 +2068,7 @@ struct ethtool_link_settings { + __u8 transceiver; + __u8 master_slave_cfg; + __u8 master_slave_state; +- __u8 reserved1[1]; ++ __u8 rate_matching; + __u32 reserved[7]; + __u32 link_mode_masks[0]; + /* layout of link_mode_masks fields: +--- a/include/uapi/linux/ethtool_netlink.h ++++ b/include/uapi/linux/ethtool_netlink.h +@@ -238,6 +238,7 @@ enum { + ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG, /* u8 */ + ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE, /* u8 */ + ETHTOOL_A_LINKMODES_LANES, /* u32 */ ++ ETHTOOL_A_LINKMODES_RATE_MATCHING, /* u8 */ + + /* add new constants above here */ + __ETHTOOL_A_LINKMODES_CNT, +--- a/net/ethtool/ioctl.c ++++ b/net/ethtool/ioctl.c +@@ -559,6 +559,7 @@ static int ethtool_get_link_ksettings(st + = __ETHTOOL_LINK_MODE_MASK_NU32; + link_ksettings.base.master_slave_cfg = MASTER_SLAVE_CFG_UNSUPPORTED; + link_ksettings.base.master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; ++ link_ksettings.base.rate_matching = RATE_MATCH_NONE; + + return store_link_ksettings_for_user(useraddr, &link_ksettings); + } +--- a/net/ethtool/linkmodes.c ++++ b/net/ethtool/linkmodes.c +@@ -70,6 +70,7 @@ static int linkmodes_reply_size(const st + + nla_total_size(sizeof(u32)) /* LINKMODES_SPEED */ + + nla_total_size(sizeof(u32)) /* LINKMODES_LANES */ + + nla_total_size(sizeof(u8)) /* LINKMODES_DUPLEX */ ++ + nla_total_size(sizeof(u8)) /* LINKMODES_RATE_MATCHING */ + + 0; + ret = ethnl_bitset_size(ksettings->link_modes.advertising, + ksettings->link_modes.supported, +@@ -143,6 +144,10 @@ static int linkmodes_fill_reply(struct s + lsettings->master_slave_state)) + return -EMSGSIZE; + ++ if (nla_put_u8(skb, ETHTOOL_A_LINKMODES_RATE_MATCHING, ++ lsettings->rate_matching)) ++ return -EMSGSIZE; ++ + return 0; + } + diff --git a/target/linux/generic/backport-5.15/792-01-v6.0-net-phylink-disable-PCS-polling-over-major-configura.patch b/target/linux/generic/backport-5.15/792-01-v6.0-net-phylink-disable-PCS-polling-over-major-configura.patch index cda77e3e2d..a0cb367ba7 100644 --- a/target/linux/generic/backport-5.15/792-01-v6.0-net-phylink-disable-PCS-polling-over-major-configura.patch +++ b/target/linux/generic/backport-5.15/792-01-v6.0-net-phylink-disable-PCS-polling-over-major-configura.patch @@ -17,7 +17,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -756,6 +756,18 @@ static void phylink_resolve_flow(struct +@@ -759,6 +759,18 @@ static void phylink_resolve_flow(struct } } @@ -36,7 +36,7 @@ Signed-off-by: Jakub Kicinski static void phylink_mac_config(struct phylink *pl, const struct phylink_link_state *state) { -@@ -787,6 +799,7 @@ static void phylink_major_config(struct +@@ -790,6 +802,7 @@ static void phylink_major_config(struct const struct phylink_link_state *state) { struct phylink_pcs *pcs = NULL; @@ -44,7 +44,7 @@ Signed-off-by: Jakub Kicinski int err; phylink_dbg(pl, "major config %s\n", phy_modes(state->interface)); -@@ -799,8 +812,12 @@ static void phylink_major_config(struct +@@ -802,8 +815,12 @@ static void phylink_major_config(struct pcs); return; } @@ -57,7 +57,7 @@ Signed-off-by: Jakub Kicinski if (pl->mac_ops->mac_prepare) { err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode, state->interface); -@@ -814,8 +831,10 @@ static void phylink_major_config(struct +@@ -817,8 +834,10 @@ static void phylink_major_config(struct /* If we have a new PCS, switch to the new PCS after preparing the MAC * for the change. */ @@ -70,7 +70,7 @@ Signed-off-by: Jakub Kicinski phylink_mac_config(pl, state); -@@ -841,6 +860,8 @@ static void phylink_major_config(struct +@@ -844,6 +863,8 @@ static void phylink_major_config(struct phylink_err(pl, "mac_finish failed: %pe\n", ERR_PTR(err)); } diff --git a/target/linux/generic/backport-5.15/792-02-v6.0-net-phylink-fix-NULL-pl-pcs-dereference-during-phyli.patch b/target/linux/generic/backport-5.15/792-02-v6.0-net-phylink-fix-NULL-pl-pcs-dereference-during-phyli.patch index f1f359bad7..fec2fddfda 100644 --- a/target/linux/generic/backport-5.15/792-02-v6.0-net-phylink-fix-NULL-pl-pcs-dereference-during-phyli.patch +++ b/target/linux/generic/backport-5.15/792-02-v6.0-net-phylink-fix-NULL-pl-pcs-dereference-during-phyli.patch @@ -27,7 +27,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -764,7 +764,7 @@ static void phylink_pcs_poll_stop(struct +@@ -767,7 +767,7 @@ static void phylink_pcs_poll_stop(struct static void phylink_pcs_poll_start(struct phylink *pl) { diff --git a/target/linux/generic/backport-5.15/792-03-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch b/target/linux/generic/backport-5.15/792-03-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch index c8176c90f5..71b09cbe75 100644 --- a/target/linux/generic/backport-5.15/792-03-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch +++ b/target/linux/generic/backport-5.15/792-03-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch @@ -35,7 +35,7 @@ Signed-off-by: David S. Miller bool mac_link_dropped; bool using_mac_select_pcs; -@@ -795,6 +800,22 @@ static void phylink_mac_pcs_an_restart(s +@@ -798,6 +803,22 @@ static void phylink_mac_pcs_an_restart(s } } @@ -58,7 +58,7 @@ Signed-off-by: David S. Miller static void phylink_major_config(struct phylink *pl, bool restart, const struct phylink_link_state *state) { -@@ -832,12 +853,16 @@ static void phylink_major_config(struct +@@ -835,12 +856,16 @@ static void phylink_major_config(struct * for the change. */ if (pcs_changed) { @@ -75,7 +75,7 @@ Signed-off-by: David S. Miller if (pl->pcs_ops) { err = pl->pcs_ops->pcs_config(pl->pcs, pl->cur_link_an_mode, state->interface, -@@ -1261,6 +1286,7 @@ struct phylink *phylink_create(struct ph +@@ -1264,6 +1289,7 @@ struct phylink *phylink_create(struct ph pl->link_config.speed = SPEED_UNKNOWN; pl->link_config.duplex = DUPLEX_UNKNOWN; pl->link_config.an_enabled = true; @@ -83,7 +83,7 @@ Signed-off-by: David S. Miller pl->mac_ops = mac_ops; __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); timer_setup(&pl->link_poll, phylink_fixed_poll, 0); -@@ -1652,6 +1678,8 @@ void phylink_start(struct phylink *pl) +@@ -1655,6 +1681,8 @@ void phylink_start(struct phylink *pl) if (pl->netdev) netif_carrier_off(pl->netdev); @@ -92,7 +92,7 @@ Signed-off-by: David S. Miller /* Apply the link configuration to the MAC when starting. This allows * a fixed-link to start with the correct parameters, and also * ensures that we set the appropriate advertisement for Serdes links. -@@ -1662,6 +1690,8 @@ void phylink_start(struct phylink *pl) +@@ -1665,6 +1693,8 @@ void phylink_start(struct phylink *pl) */ phylink_mac_initial_config(pl, true); @@ -101,7 +101,7 @@ Signed-off-by: David S. Miller clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); phylink_run_resolve(pl); -@@ -1681,16 +1711,9 @@ void phylink_start(struct phylink *pl) +@@ -1684,16 +1714,9 @@ void phylink_start(struct phylink *pl) poll = true; } @@ -120,7 +120,7 @@ Signed-off-by: David S. Miller if (poll) mod_timer(&pl->link_poll, jiffies + HZ); if (pl->phydev) -@@ -1727,6 +1750,10 @@ void phylink_stop(struct phylink *pl) +@@ -1730,6 +1753,10 @@ void phylink_stop(struct phylink *pl) } phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED); diff --git a/target/linux/generic/backport-5.15/815-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch b/target/linux/generic/backport-5.15/815-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch index 3e60f91a2a..6e5ac8b249 100644 --- a/target/linux/generic/backport-5.15/815-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch +++ b/target/linux/generic/backport-5.15/815-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch @@ -153,7 +153,7 @@ Signed-off-by: David S. Miller #include #include #include -@@ -582,6 +583,7 @@ struct macsec_ops; +@@ -590,6 +591,7 @@ struct macsec_ops; * @phy_num_led_triggers: Number of triggers in @phy_led_triggers * @led_link_trigger: LED trigger for link up/down * @last_triggered: last LED trigger for link speed @@ -161,7 +161,7 @@ Signed-off-by: David S. Miller * @master_slave_set: User requested master/slave configuration * @master_slave_get: Current master/slave advertisement * @master_slave_state: Current master/slave configuration -@@ -668,6 +670,7 @@ struct phy_device { +@@ -678,6 +680,7 @@ struct phy_device { struct phy_led_trigger *led_link_trigger; #endif @@ -169,7 +169,7 @@ Signed-off-by: David S. Miller /* * Interrupt number for this PHY -@@ -739,6 +742,19 @@ struct phy_tdr_config { +@@ -749,6 +752,19 @@ struct phy_tdr_config { #define PHY_PAIR_ALL -1 /** diff --git a/target/linux/generic/backport-5.15/815-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-5.15/815-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch index f990557cc7..3968a884b8 100644 --- a/target/linux/generic/backport-5.15/815-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch +++ b/target/linux/generic/backport-5.15/815-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -59,7 +59,7 @@ Signed-off-by: David S. Miller init_data.fwnode = of_fwnode_handle(led); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -745,15 +745,19 @@ struct phy_tdr_config { +@@ -755,15 +755,19 @@ struct phy_tdr_config { * struct phy_led: An LED driven by the PHY * * @list: List of LEDs @@ -79,7 +79,7 @@ Signed-off-by: David S. Miller /** * struct phy_driver - Driver structure for a particular PHY type * -@@ -953,6 +957,15 @@ struct phy_driver { +@@ -978,6 +982,15 @@ struct phy_driver { int (*get_sqi)(struct phy_device *dev); /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev); diff --git a/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch index 4814688de4..35e1a1c723 100644 --- a/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch +++ b/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -52,7 +52,7 @@ Signed-off-by: David S. Miller init_data.fwnode = of_fwnode_handle(led); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -966,6 +966,18 @@ struct phy_driver { +@@ -991,6 +991,18 @@ struct phy_driver { */ int (*led_brightness_set)(struct phy_device *dev, u8 index, enum led_brightness value); diff --git a/target/linux/generic/backport-5.15/894-v6.8-net-ethtool-implement-ethtool_puts.patch b/target/linux/generic/backport-5.15/894-v6.8-net-ethtool-implement-ethtool_puts.patch index ef9e706cb4..283e226d16 100644 --- a/target/linux/generic/backport-5.15/894-v6.8-net-ethtool-implement-ethtool_puts.patch +++ b/target/linux/generic/backport-5.15/894-v6.8-net-ethtool-implement-ethtool_puts.patch @@ -123,7 +123,7 @@ Signed-off-by: Justin Stitt #endif /* _LINUX_ETHTOOL_H */ --- a/net/ethtool/ioctl.c +++ b/net/ethtool/ioctl.c -@@ -1953,6 +1953,13 @@ __printf(2, 3) void ethtool_sprintf(u8 * +@@ -1954,6 +1954,13 @@ __printf(2, 3) void ethtool_sprintf(u8 * } EXPORT_SYMBOL(ethtool_sprintf); diff --git a/target/linux/generic/hack-5.15/795-backport-phylink_pcs-helpers.patch b/target/linux/generic/hack-5.15/795-backport-phylink_pcs-helpers.patch index a463bf7c4e..f93d84c6a4 100644 --- a/target/linux/generic/hack-5.15/795-backport-phylink_pcs-helpers.patch +++ b/target/linux/generic/hack-5.15/795-backport-phylink_pcs-helpers.patch @@ -57,7 +57,7 @@ Signed-off-by: Daniel Golle const unsigned long *advertising); --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -931,7 +931,6 @@ static int phylink_change_inband_advert( +@@ -934,7 +934,6 @@ static int phylink_change_inband_advert( return 0; } @@ -65,7 +65,7 @@ Signed-off-by: Daniel Golle static void phylink_mac_pcs_get_state(struct phylink *pl, struct phylink_link_state *state) { -@@ -3015,6 +3014,52 @@ void phylink_mii_c22_pcs_get_state(struc +@@ -3019,6 +3018,52 @@ void phylink_mii_c22_pcs_get_state(struc EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_get_state); /** @@ -118,7 +118,7 @@ Signed-off-by: Daniel Golle * phylink_mii_c22_pcs_set_advertisement() - configure the clause 37 PCS * advertisement * @pcs: a pointer to a &struct mdio_device. -@@ -3086,6 +3131,46 @@ int phylink_mii_c22_pcs_set_advertisemen +@@ -3090,6 +3135,46 @@ int phylink_mii_c22_pcs_set_advertisemen EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_set_advertisement); /** diff --git a/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch index 83587b5c93..f93dca6814 100644 --- a/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -23,7 +23,7 @@ Signed-off-by: Gabor Juhos sysfs_remove_link(&dev->dev.kobj, "phydev"); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -843,6 +843,12 @@ struct phy_driver { +@@ -868,6 +868,12 @@ struct phy_driver { /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); diff --git a/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch b/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch index 46c304032d..daf6cf3ce7 100644 --- a/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch +++ b/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch @@ -13,7 +13,7 @@ Signed-off-by: Bhaskar Upadhaya --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -398,6 +398,7 @@ void phylink_get_linkmodes(unsigned long +@@ -400,6 +400,7 @@ void phylink_get_linkmodes(unsigned long caps |= MAC_1000FD; break; @@ -21,7 +21,7 @@ Signed-off-by: Bhaskar Upadhaya case PHY_INTERFACE_MODE_2500BASEX: caps |= MAC_2500FD; break; -@@ -651,6 +652,10 @@ static int phylink_parse_mode(struct phy +@@ -654,6 +655,10 @@ static int phylink_parse_mode(struct phy phylink_set(pl->supported, 2500baseX_Full); break; @@ -34,18 +34,18 @@ Signed-off-by: Bhaskar Upadhaya break; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -153,6 +153,7 @@ typedef enum { - PHY_INTERFACE_MODE_USXGMII, - /* 10GBASE-KR - with Clause 73 AN */ +@@ -157,6 +157,7 @@ typedef enum { PHY_INTERFACE_MODE_10GKR, + PHY_INTERFACE_MODE_QUSGMII, + PHY_INTERFACE_MODE_1000BASEKX, + PHY_INTERFACE_MODE_2500SGMII, PHY_INTERFACE_MODE_MAX, } phy_interface_t; -@@ -268,6 +269,8 @@ static inline const char *phy_modes(phy_ - return "10gbase-kr"; - case PHY_INTERFACE_MODE_100BASEX: +@@ -276,6 +277,8 @@ static inline const char *phy_modes(phy_ return "100base-x"; + case PHY_INTERFACE_MODE_QUSGMII: + return "qusgmii"; + case PHY_INTERFACE_MODE_2500SGMII: + return "sgmii-2500"; default: diff --git a/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch b/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch index 437c761132..1262e9498d 100644 --- a/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch +++ b/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch @@ -33,7 +33,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c phy_led_trigger_change_speed(phydev); } -@@ -563,7 +563,7 @@ int phy_start_cable_test(struct phy_devi +@@ -591,7 +591,7 @@ int phy_start_cable_test(struct phy_devi goto out; /* Mark the carrier down until the test is complete */ @@ -42,7 +42,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c netif_testing_on(dev); err = phydev->drv->cable_test_start(phydev); -@@ -634,7 +634,7 @@ int phy_start_cable_test_tdr(struct phy_ +@@ -662,7 +662,7 @@ int phy_start_cable_test_tdr(struct phy_ goto out; /* Mark the carrier down until the test is complete */ @@ -51,7 +51,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c netif_testing_on(dev); err = phydev->drv->cable_test_tdr_start(phydev, config); -@@ -706,7 +706,7 @@ static int phy_check_link_status(struct +@@ -734,7 +734,7 @@ static int phy_check_link_status(struct phy_link_up(phydev); } else if (!phydev->link && phydev->state != PHY_NOLINK) { phydev->state = PHY_NOLINK; @@ -60,7 +60,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c } return 0; -@@ -1192,7 +1192,7 @@ void phy_state_machine(struct work_struc +@@ -1220,7 +1220,7 @@ void phy_state_machine(struct work_struc case PHY_HALTED: if (phydev->link) { phydev->link = 0; @@ -95,7 +95,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c phydev->mii_ts->link_state(phydev->mii_ts, phydev); --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -1370,7 +1370,8 @@ void phylink_destroy(struct phylink *pl) +@@ -1373,7 +1373,8 @@ void phylink_destroy(struct phylink *pl) } EXPORT_SYMBOL_GPL(phylink_destroy); @@ -107,7 +107,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c bool tx_pause, rx_pause; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -706,7 +706,7 @@ struct phy_device { +@@ -716,7 +716,7 @@ struct phy_device { u8 mdix; u8 mdix_ctrl; diff --git a/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch index 5205a8f936..fc7873a01b 100644 --- a/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch +++ b/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch @@ -11,7 +11,7 @@ Signed-off-by: John Crispin --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c -@@ -706,7 +706,10 @@ static int phy_check_link_status(struct +@@ -734,7 +734,10 @@ static int phy_check_link_status(struct phy_link_up(phydev); } else if (!phydev->link && phydev->state != PHY_NOLINK) { phydev->state = PHY_NOLINK; @@ -23,7 +23,7 @@ Signed-off-by: John Crispin } return 0; -@@ -1192,7 +1195,10 @@ void phy_state_machine(struct work_struc +@@ -1220,7 +1223,10 @@ void phy_state_machine(struct work_struc case PHY_HALTED: if (phydev->link) { phydev->link = 0; @@ -37,7 +37,7 @@ Signed-off-by: John Crispin break; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -622,6 +622,7 @@ struct phy_device { +@@ -630,6 +630,7 @@ struct phy_device { unsigned downshifted_rate:1; unsigned is_on_sfp_module:1; unsigned mac_managed_pm:1; diff --git a/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch index 04a110a233..bf4d35764e 100644 --- a/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch @@ -21,7 +21,7 @@ Submitted-by: John Crispin --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -984,6 +984,10 @@ struct phy_driver { +@@ -1009,6 +1009,10 @@ struct phy_driver { int (*led_blink_set)(struct phy_device *dev, u8 index, unsigned long *delay_on, unsigned long *delay_off); diff --git a/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch b/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch index 6b24df4674..bf6e517cfb 100644 --- a/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch @@ -21,7 +21,7 @@ Submitted-by: John Crispin --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -1991,6 +1991,11 @@ int phylink_ethtool_ksettings_set(struct +@@ -1994,6 +1994,11 @@ int phylink_ethtool_ksettings_set(struct * the presence of a PHY, this should not be changed as that * should be determined from the media side advertisement. */ @@ -33,7 +33,7 @@ Submitted-by: John Crispin return phy_ethtool_ksettings_set(pl->phydev, kset); } -@@ -2294,8 +2299,11 @@ int phylink_ethtool_get_eee(struct phyli +@@ -2297,8 +2302,11 @@ int phylink_ethtool_get_eee(struct phyli ASSERT_RTNL(); @@ -46,7 +46,7 @@ Submitted-by: John Crispin return ret; } -@@ -2312,8 +2320,11 @@ int phylink_ethtool_set_eee(struct phyli +@@ -2315,8 +2323,11 @@ int phylink_ethtool_set_eee(struct phyli ASSERT_RTNL(); diff --git a/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch b/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch index 2048e22f2e..4c573e2bb0 100644 --- a/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch +++ b/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch @@ -15,7 +15,7 @@ Submitted-by: Birger Koblitz --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -408,6 +408,7 @@ void phylink_get_linkmodes(unsigned long +@@ -410,6 +410,7 @@ void phylink_get_linkmodes(unsigned long case PHY_INTERFACE_MODE_XGMII: case PHY_INTERFACE_MODE_RXAUI: @@ -23,7 +23,7 @@ Submitted-by: Birger Koblitz case PHY_INTERFACE_MODE_XAUI: case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_10GKR: -@@ -662,6 +663,7 @@ static int phylink_parse_mode(struct phy +@@ -665,6 +666,7 @@ static int phylink_parse_mode(struct phy fallthrough; case PHY_INTERFACE_MODE_USXGMII: case PHY_INTERFACE_MODE_10GKR: @@ -33,7 +33,7 @@ Submitted-by: Birger Koblitz phylink_set(pl->supported, 10baseT_Full); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -139,6 +139,7 @@ typedef enum { +@@ -141,6 +141,7 @@ typedef enum { PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, @@ -41,7 +41,7 @@ Submitted-by: Birger Koblitz PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, PHY_INTERFACE_MODE_100BASEX, -@@ -244,6 +245,8 @@ static inline const char *phy_modes(phy_ +@@ -248,6 +249,8 @@ static inline const char *phy_modes(phy_ return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; diff --git a/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch b/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch index 56ce80bb20..9a6b00d7c0 100644 --- a/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch +++ b/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch @@ -21,7 +21,7 @@ Submitted-by: John Crispin --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -280,7 +280,7 @@ static inline const char *phy_modes(phy_ +@@ -287,7 +287,7 @@ static inline const char *phy_modes(phy_ #define PHY_INIT_TIMEOUT 100000 #define PHY_FORCE_TIMEOUT 10 diff --git a/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch b/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch index b0a8fadb5f..937e5d3161 100644 --- a/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch +++ b/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch @@ -443,7 +443,7 @@ Signed-off-by: Daniel Golle * @dev: target MDIO device --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c -@@ -482,10 +482,16 @@ int __phy_read_mmd(struct phy_device *ph +@@ -556,10 +556,16 @@ int __phy_read_mmd(struct phy_device *ph struct mii_bus *bus = phydev->mdio.bus; int phy_addr = phydev->mdio.addr; @@ -464,7 +464,7 @@ Signed-off-by: Daniel Golle } return val; } -@@ -538,12 +544,18 @@ int __phy_write_mmd(struct phy_device *p +@@ -612,12 +618,18 @@ int __phy_write_mmd(struct phy_device *p struct mii_bus *bus = phydev->mdio.bus; int phy_addr = phydev->mdio.addr; @@ -487,7 +487,7 @@ Signed-off-by: Daniel Golle } return ret; } -@@ -749,6 +761,13 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd); +@@ -823,6 +835,13 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd); static int __phy_read_page(struct phy_device *phydev) { @@ -501,7 +501,7 @@ Signed-off-by: Daniel Golle if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n")) return -EOPNOTSUPP; -@@ -757,6 +776,13 @@ static int __phy_read_page(struct phy_de +@@ -831,6 +850,13 @@ static int __phy_read_page(struct phy_de static int __phy_write_page(struct phy_device *phydev, int page) { @@ -515,7 +515,7 @@ Signed-off-by: Daniel Golle if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n")) return -EOPNOTSUPP; -@@ -858,6 +884,18 @@ int phy_read_paged(struct phy_device *ph +@@ -932,6 +958,18 @@ int phy_read_paged(struct phy_device *ph { int ret = 0, oldpage; @@ -534,7 +534,7 @@ Signed-off-by: Daniel Golle oldpage = phy_select_page(phydev, page); if (oldpage >= 0) ret = __phy_read(phydev, regnum); -@@ -879,6 +917,18 @@ int phy_write_paged(struct phy_device *p +@@ -953,6 +991,18 @@ int phy_write_paged(struct phy_device *p { int ret = 0, oldpage; @@ -665,7 +665,7 @@ Signed-off-by: Daniel Golle #define MDIO_DEVICE_IS_PHY 0x80000000 /** -@@ -421,6 +422,22 @@ struct mii_bus { +@@ -428,6 +429,22 @@ struct mii_bus { /** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR]; @@ -688,7 +688,7 @@ Signed-off-by: Daniel Golle }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) -@@ -1795,6 +1812,66 @@ static inline int __phy_package_read(str +@@ -1825,6 +1842,66 @@ static inline int __phy_package_read(str return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum); } @@ -755,7 +755,7 @@ Signed-off-by: Daniel Golle static inline int phy_package_write(struct phy_device *phydev, u32 regnum, u16 val) { -@@ -1817,6 +1894,72 @@ static inline int __phy_package_write(st +@@ -1847,6 +1924,72 @@ static inline int __phy_package_write(st return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); }