From 0f269554e4fd16dd4bcb705e38ff063199e57018 Mon Sep 17 00:00:00 2001 From: Nick Hainke Date: Sat, 16 Jul 2022 10:33:24 +0200 Subject: [PATCH] ipq40xx: convert GL-AP1300 to DSA Convert GL-AP1300 to DSA and enable it. While working on it rename the GL-AP1300 leds from green to white. Tested-by: Rob White Tested-by: Robert Sommer Signed-off-by: Nick Hainke --- .../ipq40xx/base-files/etc/board.d/01_leds | 2 +- .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../arm/boot/dts/qcom-ipq4018-gl-ap1300.dts | 37 +++++++++++++++++-- target/linux/ipq40xx/image/generic.mk | 3 +- 4 files changed, 37 insertions(+), 6 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds index 3ba130cc90..1ba5d2b1a7 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds +++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds @@ -53,7 +53,7 @@ engenius,ens620ext) ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1" ;; glinet,gl-ap1300) - ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" + ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan" ;; glinet,gl-b1300 |\ mikrotik,lhgg-60ad) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 7c9c2f0827..2e0e8d33cd 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -32,6 +32,7 @@ ipq40xx_setup_interfaces() asus,map-ac2200|\ cilab,meshpoint-one|\ edgecore,ecw5211|\ + glinet,gl-ap1300|\ glinet,gl-b2200|\ google,wifi|\ linksys,whw03v2|\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts index 41ed66e595..6f5d4d8a57 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts @@ -14,7 +14,6 @@ led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; - label-mac-device = &gmac0; }; memory { @@ -92,13 +91,13 @@ compatible = "gpio-leds"; led_power: power { - label = "green:power"; + label = "white:power"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; wan { - label = "green:wan"; + label = "white:wan"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; }; @@ -180,6 +179,14 @@ #address-cells = <1>; #size-cells = <1>; + macaddr_art_0: mac-address@0 { + reg = <0x0 0x6>; + }; + + macaddr_art_6: mac-address@6 { + reg = <0x6 0x6>; + }; + precal_art_1000: precal@1000 { reg = <0x1000 0x2f20>; }; @@ -256,6 +263,30 @@ status = "okay"; }; +&gmac { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport4 { + status = "okay"; + label = "lan"; + + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; +}; + +&swport5 { + status = "okay"; + label = "wan"; + + nvmem-cells = <&macaddr_art_6>; + nvmem-cell-names = "mac-address"; +}; + &wifi0 { status = "okay"; nvmem-cell-names = "pre-calibration"; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 2f0ca927f0..8fa4f4175a 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -590,8 +590,7 @@ define Device/glinet_gl-ap1300 KERNEL_INSTALL := 1 DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi endef -# Missing DSA Setup -#TARGET_DEVICES += glinet_gl-ap1300 +TARGET_DEVICES += glinet_gl-ap1300 define Device/glinet_gl-b1300 $(call Device/FitzImage) -- 2.30.2