From: Daniel Golle Date: Tue, 18 Apr 2023 18:09:01 +0000 (+0100) Subject: mediatek: bpi-r3: allow up to 3W per SFP module X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fdedeckeh.git;a=commitdiff_plain;h=929634c4dedc744f7e5df3bd16f59054c7fc6e82 mediatek: bpi-r3: allow up to 3W per SFP module According to SinoVoip up to 3A @ 3.3V are available for both SFP modules together. Raise energy limit from 1W (default) to 3W, however, be aware that using modules consuming more than 1W will require active cooling! Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts index 4d118b0fbc..bcd682fee0 100644 --- a/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts +++ b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts @@ -120,6 +120,7 @@ mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>; tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; /* SFP2 cage (LAN) */ @@ -139,6 +140,7 @@ mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>; tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; };