#include <linux/spi/flash.h>
#include <linux/routerboot.h>
#include <linux/gpio.h>
+#include <linux/version.h>
+#include <asm/prom.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#define RB_ART_SIZE 0x10000
+#define RB2011_FLAG_SFP BIT(0)
+#define RB2011_FLAG_USB BIT(1)
+#define RB2011_FLAG_WLAN BIT(2)
+
static struct mtd_partition rb2011_spi_partitions[] = {
{
.name = "routerboot",
.size = (4 * 1024 * 1024) - (256 * 1024),
},
{
- .name = "rootfs",
+ .name = "ubi",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg;
static struct ar8327_led_cfg rb2011_ar8327_led_cfg = {
- .led_ctrl0 = 0x0000c731,
+ .led_ctrl0 = 0xc731c731,
.led_ctrl1 = 0x00000000,
.led_ctrl2 = 0x00000000,
.led_ctrl3 = 0x0030c300,
.open_drain = false,
};
+static const struct ar8327_led_info rb2011_ar8327_leds[] __initconst = {
+ AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"),
+ AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"),
+ AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"),
+ AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"),
+ AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"),
+ AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"),
+ AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"),
+ AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"),
+ AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"),
+ AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"),
+ AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"),
+};
+
static struct ar8327_platform_data rb2011_ar8327_data = {
.pad0_cfg = &rb2011_ar8327_pad0_cfg,
.port0_cfg = {
.rxpause = 1,
},
.led_cfg = &rb2011_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(rb2011_ar8327_leds),
+ .leds = rb2011_ar8327_leds,
};
static struct mdio_board_info rb2011_mdio0_info[] = {
ndelay(500);
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
static struct nand_ecclayout rb2011_nand_ecclayout = {
.eccbytes = 6,
.eccpos = { 8, 9, 10, 13, 14, 15 },
.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
};
+#else
+
+static int rb2011_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ switch (section) {
+ case 0:
+ oobregion->offset = 8;
+ oobregion->length = 3;
+ return 0;
+ case 1:
+ oobregion->offset = 13;
+ oobregion->length = 3;
+ return 0;
+ default:
+ return -ERANGE;
+ }
+}
+
+static int rb2011_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ switch (section) {
+ case 0:
+ oobregion->offset = 0;
+ oobregion->length = 4;
+ return 0;
+ case 1:
+ oobregion->offset = 4;
+ oobregion->length = 1;
+ return 0;
+ case 2:
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ return 0;
+ case 3:
+ oobregion->offset = 11;
+ oobregion->length = 2;
+ return 0;
+ default:
+ return -ERANGE;
+ }
+}
+
+static const struct mtd_ooblayout_ops rb2011_nand_ecclayout_ops = {
+ .ecc = rb2011_ooblayout_ecc,
+ .free = rb2011_ooblayout_free,
+};
+#endif /* < 4.6 */
+
static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
struct nand_chip *chip = mtd->priv;
+#endif
if (mtd->writesize == 512) {
/*
* Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
* will not be able to find the kernel that we load.
*/
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
chip->ecc.layout = &rb2011_nand_ecclayout;
+#else
+ mtd_set_ooblayout(mtd, &rb2011_nand_ecclayout_ops);
+#endif
}
return 0;
rb2011_ar8327_data.get_port_link = rb2011_get_port_link;
}
-static int __init rb2011_setup(void)
+static int __init rb2011_setup(u32 flags)
{
const struct rb_info *info;
+ char buf[64];
info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
if (!info)
return -ENODEV;
+ scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
+ (info->board_name) ? info->board_name : "");
+ mips_set_machine_name(buf);
+
rb2011_init_partitions(info);
ath79_register_m25p80(&rb2011_spi_flash_data);
rb2011_nand_init();
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_RXD_DELAY |
AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(1, 0x0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_eth0_pll_data.pll_1000 = 0x6f000000;
ath79_register_eth(0);
ath79_register_eth(1);
+ if (flags & RB2011_FLAG_SFP)
+ rb2011_sfp_init();
+
+ if (flags & RB2011_FLAG_WLAN)
+ rb2011_wlan_init();
+
+ if (flags & RB2011_FLAG_USB)
+ ath79_register_usb();
+
return 0;
}
static void __init rb2011l_setup(void)
{
- rb2011_setup();
+ rb2011_setup(0);
}
-
-MIPS_MACHINE(ATH79_MACH_RB_2011L, "2011L", "MikroTik RouterBOARD 2011L",
- rb2011l_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011L, "2011L", rb2011l_setup);
static void __init rb2011us_setup(void)
{
- if (rb2011_setup())
- return;
+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
+}
- rb2011_sfp_init();
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
- ath79_register_usb();
+static void __init rb2011r5_setup(void)
+{
+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
}
-MIPS_MACHINE(ATH79_MACH_RB_2011US, "2011US", "MikroTik RouterBOARD 2011UAS",
- rb2011us_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
static void __init rb2011g_setup(void)
{
- if (rb2011_setup())
- return;
-
- rb2011_sfp_init();
- rb2011_wlan_init();
-
- ath79_register_usb();
+ rb2011_setup(RB2011_FLAG_SFP |
+ RB2011_FLAG_USB |
+ RB2011_FLAG_WLAN);
}
-MIPS_MACHINE(ATH79_MACH_RB_2011G, "2011G", "MikroTik RouterBOARD 2011UAS-2HnD",
- rb2011g_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011G, "2011G", rb2011g_setup);
projects / openwrt / staging / dedeckeh.git / blobdiff