define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +LINUX_4_4:kmod-regmap
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +kmod-crypto-cmac +kmod-regmap-core +kmod-crypto-ecdh
KCONFIG:= \
- CONFIG_BLUEZ \
- CONFIG_BLUEZ_L2CAP \
- CONFIG_BLUEZ_SCO \
- CONFIG_BLUEZ_RFCOMM \
- CONFIG_BLUEZ_BNEP \
- CONFIG_BLUEZ_HCIUART \
- CONFIG_BLUEZ_HCIUSB \
- CONFIG_BLUEZ_HIDP \
CONFIG_BT \
CONFIG_BT_BREDR=y \
CONFIG_BT_DEBUGFS=n \
- CONFIG_BT_L2CAP=y \
CONFIG_BT_LE=y \
- CONFIG_BT_SCO=y \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIBTUSB_BCM=n \
- CONFIG_BT_HCIUSB \
+ CONFIG_BT_HCIBTUSB_MTK=y \
+ CONFIG_BT_HCIBTUSB_RTL=n \
CONFIG_BT_HCIUART \
CONFIG_BT_HCIUART_BCM=n \
CONFIG_BT_HCIUART_INTEL=n \
CONFIG_BT_HCIUART_H4 \
- CONFIG_BT_HIDP \
- CONFIG_HID_SUPPORT=y
+ CONFIG_BT_HCIUART_NOKIA=n \
+ CONFIG_BT_HIDP
$(call AddDepends/rfkill)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
- $(LINUX_DIR)/drivers/bluetooth/btusb.ko
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
- FILES+= \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.ko \
$(LINUX_DIR)/drivers/bluetooth/btintel.ko
-endif
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
KCONFIG:= \
CONFIG_BT_ATH3K \
CONFIG_BT_HCIUART_ATH3K=y
- $(call AddDepends/bluetooth)
FILES:= \
$(LINUX_DIR)/drivers/bluetooth/ath3k.ko
AUTOLOAD:=$(call AutoProbe,ath3k)
$(eval $(call KernelPackage,ath3k))
-define KernelPackage/bluetooth_6lowpan
+define KernelPackage/bluetooth-6lowpan
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth 6LoWPAN support
DEPENDS:=+kmod-6lowpan +kmod-bluetooth
AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
endef
-define KernelPackage/bluetooth_6lowpan/description
+define KernelPackage/bluetooth-6lowpan/description
Kernel support for 6LoWPAN over Bluetooth Low Energy devices
endef
-$(eval $(call KernelPackage,bluetooth_6lowpan))
+$(eval $(call KernelPackage,bluetooth-6lowpan))
+
+
+define KernelPackage/btmrvl
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell Bluetooth Kernel Module support
+ DEPENDS:=+kmod-mmc +kmod-bluetooth +mwifiex-sdio-firmware
+ KCONFIG:= \
+ CONFIG_BT_MRVL \
+ CONFIG_BT_MRVL_SDIO
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl_sdio.ko
+ AUTOLOAD:=$(call AutoProbe,btmrvl btmrvl_sdio)
+endef
+
+define KernelPackage/btmrvl/description
+ Kernel support for Marvell SDIO Bluetooth Module
+endef
+
+$(eval $(call KernelPackage,btmrvl))
-define KernelPackage/bluetooth-hci-h4p
+define KernelPackage/btsdio
SUBMENU:=$(OTHER_MENU)
- TITLE:=HCI driver with H4 Nokia extensions
- DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
- KCONFIG:=CONFIG_BT_HCIH4P
- FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
- AUTOLOAD:=$(call AutoProbe,hci_h4p)
+ TITLE:=Bluetooth HCI SDIO driver
+ DEPENDS:=+kmod-bluetooth +kmod-mmc
+ KCONFIG:= \
+ CONFIG_BT_HCIBTSDIO
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/btsdio.ko
+ AUTOLOAD:=$(call AutoProbe,btsdio)
endef
-define KernelPackage/bluetooth-hci-h4p/description
- HCI driver with H4 Nokia extensions
+define KernelPackage/btsdio/description
+ Kernel support for Bluetooth device with SDIO interface
endef
-$(eval $(call KernelPackage,bluetooth-hci-h4p))
+$(eval $(call KernelPackage,btsdio))
define KernelPackage/dma-buf
TITLE:=DMA shared buffer support
HIDDEN:=1
KCONFIG:=CONFIG_DMA_SHARED_BUFFER
- FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
+ ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
+ FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+ endif
+ endif
AUTOLOAD:=$(call AutoLoad,20,dma-shared-buffer)
endef
$(eval $(call KernelPackage,dma-buf))
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
$(eval $(call KernelPackage,eeprom-at25))
-define KernelPackage/gpio-dev
+define KernelPackage/google-firmware
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Google firmware drivers (Coreboot, VPD, Memconsole)
+ KCONFIG:= \
+ CONFIG_GOOGLE_FIRMWARE=y \
+ CONFIG_GOOGLE_COREBOOT_TABLE \
+ CONFIG_GOOGLE_MEMCONSOLE \
+ CONFIG_GOOGLE_MEMCONSOLE_COREBOOT \
+ CONFIG_GOOGLE_VPD
+ FILES:= \
+ $(LINUX_DIR)/drivers/firmware/google/coreboot_table.ko \
+ $(LINUX_DIR)/drivers/firmware/google/memconsole.ko \
+ $(LINUX_DIR)/drivers/firmware/google/memconsole-coreboot.ko \
+ $(LINUX_DIR)/drivers/firmware/google/vpd-sysfs.ko
+ AUTOLOAD:=$(call AutoProbe,coreboot_table memconsole-coreboot vpd-sysfs)
+endef
+
+define KernelPackage/google-firmware/description
+ Kernel modules for Google firmware drivers. Useful for examining firmware and
+ boot details on devices using a Google bootloader based on Coreboot. Provides
+ files like /sys/firmware/log and /sys/firmware/vpd.
+endef
+
+$(eval $(call KernelPackage,google-firmware))
+
+
+define KernelPackage/gpio-f7188x
SUBMENU:=$(OTHER_MENU)
- TITLE:=Generic GPIO char device support
- DEPENDS:=@GPIO_SUPPORT
- KCONFIG:=CONFIG_GPIO_DEVICE
- FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
- AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+ TITLE:=Fintek F718xx/F818xx GPIO Support
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ KCONFIG:=CONFIG_GPIO_F7188X
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-f7188x.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-f7188x)
endef
-define KernelPackage/gpio-dev/description
- Kernel module to allows control of GPIO pins using a character device.
+define KernelPackage/gpio-f7188x/description
+ Kernel module for the GPIOs found on many Fintek Super-IO chips.
endef
-$(eval $(call KernelPackage,gpio-dev))
+$(eval $(call KernelPackage,gpio-f7188x))
-define KernelPackage/gpio-mcp23s08
+define KernelPackage/pinctrl-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
- DEPENDS:=@GPIO_SUPPORT +PACKAGE_kmod-i2c-core:kmod-i2c-core
- KCONFIG:=CONFIG_GPIO_MCP23S08
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko
- AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08)
+ HIDDEN:=1
+ DEPENDS:=@GPIO_SUPPORT +kmod-regmap-core
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08)
+endef
+
+define KernelPackage/pinctrl-mcp23s08/description
+ Kernel module for Microchip MCP23xxx I/O expander
+endef
+
+$(eval $(call KernelPackage,pinctrl-mcp23s08))
+
+
+define KernelPackage/pinctrl-mcp23s08-i2c
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microchip MCP23xxx I/O expander (I2C)
+ DEPENDS:=@GPIO_SUPPORT \
+ +kmod-pinctrl-mcp23s08 \
+ +kmod-i2c-core \
+ +kmod-regmap-i2c
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08_I2C
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_i2c.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-i2c)
+endef
+
+define KernelPackage/pinctrl-mcp23s08-i2c/description
+ Kernel module for Microchip MCP23xxx I/O expander via I2C
+endef
+
+$(eval $(call KernelPackage,pinctrl-mcp23s08-i2c))
+
+
+define KernelPackage/pinctrl-mcp23s08-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microchip MCP23xxx I/O expander (SPI)
+ DEPENDS:=@GPIO_SUPPORT +kmod-pinctrl-mcp23s08
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08_SPI
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_spi.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-spi)
endef
-define KernelPackage/gpio-mcp23s08/description
- Kernel module for Microchip MCP23xxx SPI/I2C I/O expander
+define KernelPackage/pinctrl-mcp23s08-spi/description
+ Kernel module for Microchip MCP23xxx I/O expander via SPI
endef
-$(eval $(call KernelPackage,gpio-mcp23s08))
+$(eval $(call KernelPackage,pinctrl-mcp23s08-spi))
define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP 74HC164 GPIO expander support
- KCONFIG:=CONFIG_GPIO_NXP_74HC164
- FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
- AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
+ KCONFIG:=CONFIG_GPIO_74X164
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-74x164.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-74x164)
endef
define KernelPackage/gpio-nxp-74hc164/description
define KernelPackage/gpio-pca953x
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
KCONFIG:=CONFIG_GPIO_PCA953X
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
$(eval $(call KernelPackage,gpio-pcf857x))
-define KernelPackage/iio-core
+
+define KernelPackage/gpio-it87
SUBMENU:=$(OTHER_MENU)
- TITLE:=Industrial IO core
- KCONFIG:= \
- CONFIG_IIO \
- CONFIG_IIO_BUFFER=y \
- CONFIG_IIO_KFIFO_BUF \
- CONFIG_IIO_TRIGGER=y \
- CONFIG_IIO_TRIGGERED_BUFFER
- FILES:= \
- $(LINUX_DIR)/drivers/iio/industrialio.ko \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko@lt4.4) \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko@ge4.4) \
- $(LINUX_DIR)/drivers/iio/kfifo_buf.ko@lt4.4 \
- $(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko@ge4.4
- AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for IT87xx Super I/O chips
+ KCONFIG:=CONFIG_GPIO_IT87
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-it87.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-it87,1)
endef
-define KernelPackage/iio-core/description
- The industrial I/O subsystem provides a unified framework for
- drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc)
+define KernelPackage/gpio-it87/description
+ This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
+ supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as
+ well.
endef
-$(eval $(call KernelPackage,iio-core))
+$(eval $(call KernelPackage,gpio-it87))
-define KernelPackage/iio-ad799x
+define KernelPackage/gpio-amd-fch
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-i2c-core kmod-iio-core
- TITLE:=Analog Devices AD799x ADC driver
- KCONFIG:= \
- CONFIG_AD799X_RING_BUFFER=y \
- CONFIG_AD799X
- FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
- AUTOLOAD:=$(call AutoLoad,56,ad799x)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for AMD Fusion Controller Hub (G-series SOCs)
+ KCONFIG:=CONFIG_GPIO_AMD_FCH
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-amd-fch.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-amd-fch,1)
endef
-define KernelPackage/iio-ad799x/description
- support for Analog Devices:
- ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
- i2c analog to digital converters (ADC).
+define KernelPackage/gpio-amd-fch/description
+ This option enables driver for GPIO on AMDs Fusion Controller Hub,
+ as found on G-series SOCs (eg. GX-412TC)
endef
-$(eval $(call KernelPackage,iio-ad799x))
+$(eval $(call KernelPackage,gpio-amd-fch))
-define KernelPackage/iio-dht11
+define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
- TITLE:=DHT11 (and compatible) humidity and temperature sensors
+ TITLE:=Parallel port support
KCONFIG:= \
- CONFIG_DHT11
- FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
- AUTOLOAD:=$(call AutoLoad,56,dht11)
+ CONFIG_PARPORT \
+ CONFIG_PPDEV
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport.ko \
+ $(LINUX_DIR)/drivers/char/ppdev.ko
+ AUTOLOAD:=$(call AutoLoad,50,parport ppdev)
endef
-define KernelPackage/iio-dht11/description
- support for DHT11 and DHT22 digitial humidity and temperature sensors
- attached at GPIO lines. You will need a custom device tree file to
- specify the GPIO line to use.
+$(eval $(call KernelPackage,ppdev))
+
+
+define KernelPackage/parport-pc
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Parallel port interface (PC-style) support
+ DEPENDS:=+kmod-ppdev
+ KCONFIG:= \
+ CONFIG_KS0108=n \
+ CONFIG_PARPORT_PC \
+ CONFIG_PARPORT_1284=y \
+ CONFIG_PARPORT_PC_FIFO=y \
+ CONFIG_PARPORT_PC_PCMCIA=n \
+ CONFIG_PARPORT_PC_SUPERIO=y \
+ CONFIG_PARPORT_SERIAL=n \
+ CONFIG_PARIDE=n \
+ CONFIG_SCSI_IMM=n \
+ CONFIG_SCSI_PPA=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport_pc.ko
+ AUTOLOAD:=$(call AutoLoad,51,parport_pc)
endef
-$(eval $(call KernelPackage,iio-dht11))
+$(eval $(call KernelPackage,parport-pc))
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
- TITLE:=Parallel port and line printer support
+ TITLE:=Parallel port line printer device support
+ DEPENDS:=+kmod-ppdev
KCONFIG:= \
- CONFIG_PARPORT \
- CONFIG_PRINTER \
- CONFIG_PPDEV
+ CONFIG_PRINTER
FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.ko \
- $(LINUX_DIR)/drivers/char/lp.ko \
- $(LINUX_DIR)/drivers/char/ppdev.ko
- AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
+ $(LINUX_DIR)/drivers/char/lp.ko
+ AUTOLOAD:=$(call AutoLoad,52,lp)
endef
$(eval $(call KernelPackage,lp))
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
+ DEPENDS:=@!TARGET_uml
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
CONFIG_MMC_DEBUG=n \
CONFIG_MMC_UNSAFE_RESUME=n \
- CONFIG_MMC_BLOCK_BOUNCE=y \
CONFIG_MMC_TIFM_SD=n \
CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+ $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko
AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
- KCONFIG:=CONFIG_SOFT_WATCHDOG
+ KCONFIG:=CONFIG_SOFT_WATCHDOG \
+ CONFIG_SOFT_WATCHDOG_PRETIMEOUT=n
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
AUTOLOAD:=$(call AutoLoad,50,softdog,1)
endef
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
TITLE:=Silicon Sonics Backplane glue code
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm63xx
KCONFIG:=\
CONFIG_SSB \
CONFIG_SSB_B43_PCI_BRIDGE=y \
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
$(eval $(call KernelPackage,bcma))
-define KernelPackage/wdt-omap
- SUBMENU:=$(OTHER_MENU)
- TITLE:=OMAP Watchdog timer
- DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
- KCONFIG:=CONFIG_OMAP_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,omap_wdt,1)
-endef
-
-define KernelPackage/wdt-omap/description
- Kernel module for TI omap watchdog timer
-endef
-
-$(eval $(call KernelPackage,wdt-omap))
-
-
define KernelPackage/rtc-ds1307
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c +kmod-hwmon-core
KCONFIG:=CONFIG_RTC_DRV_DS1307 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
define KernelPackage/rtc-ds1374
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1374 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1374 \
CONFIG_RTC_DRV_DS1374_WDT=n \
CONFIG_RTC_CLASS=y
define KernelPackage/rtc-ds1672
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1672 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1672 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
$(eval $(call KernelPackage,rtc-ds1672))
+define KernelPackage/rtc-em3027
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microelectronic EM3027 RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_EM3027 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-em3027.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-em3027)
+endef
+
+define KernelPackage/rtc-em3027/description
+ Kernel module for Microelectronic EM3027 RTC.
+endef
+
+$(eval $(call KernelPackage,rtc-em3027))
+
+
define KernelPackage/rtc-isl1208
SUBMENU:=$(OTHER_MENU)
TITLE:=Intersil ISL1208 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_ISL1208 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_PCF8563 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
define KernelPackage/rtc-pcf2123
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
- DEPENDS:=@RTC_SUPPORT
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-regmap-spi
KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
$(eval $(call KernelPackage,rtc-pcf2123))
-define KernelPackage/rtc-pt7c4338
+define KernelPackage/rtc-pcf2127
SUBMENU:=$(OTHER_MENU)
- TITLE:=Pericom PT7C4338 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
- KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
+ TITLE:=NXP PCF2127 and PCF2129 RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-spi
+ KCONFIG:=CONFIG_RTC_DRV_PCF2127 \
CONFIG_RTC_CLASS=y
- FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
- AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2127.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-pcf2127)
endef
-define KernelPackage/rtc-pt7c4338/description
- Kernel module for Pericom PT7C4338 i2c RTC chip
+define KernelPackage/rtc-pcf2127/description
+ Kernel module for NXP PCF2127 and PCF2129 RTC chip
endef
-$(eval $(call KernelPackage,rtc-pt7c4338))
+$(eval $(call KernelPackage,rtc-pcf2127))
+
define KernelPackage/rtc-rs5c372a
SUBMENU:=$(OTHER_MENU)
TITLE:=Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_RS5C372 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rs5c372.ko
$(eval $(call KernelPackage,rtc-rs5c372a))
+define KernelPackage/rtc-rx8025
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Epson RX-8025 / RX-8035
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_RX8025 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rx8025.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-rx8025,1)
+endef
+
+define KernelPackage/rtc-rx8025/description
+ Kernel module for Epson RX-8025 and RX-8035 I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-rx8025))
+
+define KernelPackage/rtc-s35390a
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Seico S-35390A
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_S35390A \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-s35390a.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-s35390a,1)
+endef
+
+define KernelPackage/rtc-s35390a/description
+ Kernel module for Seiko Instruments S-35390A I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-s35390a))
+
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,mtdtests))
+define KernelPackage/mtdoops
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Log panic/oops to an MTD buffer
+ KCONFIG:=CONFIG_MTD_OOPS
+ FILES:=$(LINUX_DIR)/drivers/mtd/mtdoops.ko
+endef
+
+define KernelPackage/mtdoops/description
+ Kernel modules for Log panic/oops to an MTD buffer
+endef
+
+$(eval $(call KernelPackage,mtdoops))
+
+
+define KernelPackage/mtdram
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Test MTD driver using RAM
+ KCONFIG:=CONFIG_MTD_MTDRAM \
+ CONFIG_MTDRAM_TOTAL_SIZE=4096 \
+ CONFIG_MTDRAM_ERASE_SIZE=128
+ FILES:=$(LINUX_DIR)/drivers/mtd/devices/mtdram.ko
+endef
+
+define KernelPackage/mtdram/description
+ Test MTD driver using RAM
+endef
+
+$(eval $(call KernelPackage,mtdram))
+
+
+define KernelPackage/ramoops
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Ramoops (pstore-ram)
+ DEFAULT:=m if ALL_KMODS
+ KCONFIG:=CONFIG_PSTORE_RAM
+ DEPENDS:=+kmod-pstore +kmod-reed-solomon
+ FILES:= $(LINUX_DIR)/fs/pstore/ramoops.ko
+ AUTOLOAD:=$(call AutoLoad,30,ramoops,1)
+endef
+
+define KernelPackage/ramoops/description
+ Kernel module for pstore-ram (ramoops) crash log storage
+endef
+
+$(eval $(call KernelPackage,ramoops))
+
+
+define KernelPackage/reed-solomon
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Reed-Solomon error correction
+ DEFAULT:=m if ALL_KMODS
+ KCONFIG:=CONFIG_REED_SOLOMON \
+ CONFIG_REED_SOLOMON_DEC8=y \
+ CONFIG_REED_SOLOMON_ENC8=y
+ FILES:= $(LINUX_DIR)/lib/reed_solomon/reed_solomon.ko
+ AUTOLOAD:=$(call AutoLoad,30,reed_solomon,1)
+endef
+
+define KernelPackage/reed-solomon/description
+ Kernel module for Reed-Solomon error correction
+endef
+
+$(eval $(call KernelPackage,reed-solomon))
+
+
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
KCONFIG:= CONFIG_SERIAL_8250 \
+ CONFIG_SERIAL_8250_PCI \
CONFIG_SERIAL_8250_NR_UARTS=16 \
- CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
- CONFIG_SERIAL_8250_EXTENDED=y \
- CONFIG_SERIAL_8250_MANY_PORTS=y \
+ CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+ CONFIG_SERIAL_8250_EXTENDED=y \
+ CONFIG_SERIAL_8250_MANY_PORTS=y \
CONFIG_SERIAL_8250_SHARE_IRQ=y \
CONFIG_SERIAL_8250_DETECT_IRQ=n \
CONFIG_SERIAL_8250_RSA=n
FILES:= \
$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
- $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko \
+ $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko) \
+ $(if $(CONFIG_GPIOLIB),$(LINUX_DIR)/drivers/tty/serial/serial_mctrl_gpio.ko)
+ AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci)
endef
define KernelPackage/serial-8250/description
$(eval $(call KernelPackage,serial-8250))
-define KernelPackage/regmap
+define KernelPackage/serial-8250-exar
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Exar 8250 UARTs
+ KCONFIG:= CONFIG_SERIAL_8250_EXAR
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250_exar.ko
+ AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_exar)
+ DEPENDS:=+kmod-serial-8250
+endef
+
+define KernelPackage/serial-8250-exar/description
+ Kernel module for Exar serial ports
+endef
+
+$(eval $(call KernelPackage,serial-8250-exar))
+
+
+define KernelPackage/regmap-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic register map support
- DEPENDS:=+kmod-lib-lzo +kmod-i2c-core
- KCONFIG:=CONFIG_REGMAP \
- CONFIG_REGMAP_MMIO \
- CONFIG_REGMAP_SPI \
- CONFIG_REGMAP_I2C \
- CONFIG_SPI=y
- FILES:= \
- $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
- $(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
- $(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
- $(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
- AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP
+ifneq ($(wildcard $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko),)
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko
+endif
endef
-define KernelPackage/regmap/description
+define KernelPackage/regmap-core/description
Generic register map support
endef
-$(eval $(call KernelPackage,regmap))
+$(eval $(call KernelPackage,regmap-core))
+
+
+define KernelPackage/regmap-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=SPI register map support
+ DEPENDS:=+kmod-regmap-core
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP_SPI \
+ CONFIG_SPI=y
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
+endef
+
+define KernelPackage/regmap-spi/description
+ SPI register map support
+endef
+
+$(eval $(call KernelPackage,regmap-spi))
+
+
+define KernelPackage/regmap-i2c
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=I2C register map support
+ DEPENDS:=+kmod-regmap-core +kmod-i2c-core
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP_I2C
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko
+endef
+
+define KernelPackage/regmap-i2c/description
+ I2C register map support
+endef
+
+$(eval $(call KernelPackage,regmap-i2c))
+
+
+define KernelPackage/regmap-mmio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMIO register map support
+ DEPENDS:=+kmod-regmap-core
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP_MMIO
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko
+endef
+
+define KernelPackage/regmap-mmio/description
+ MMIO register map support
+endef
+
+$(eval $(call KernelPackage,regmap-mmio))
+
define KernelPackage/ikconfig
SUBMENU:=$(OTHER_MENU)
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
- DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
- CONFIG_PGTABLE_MAPPING=n \
- CONFIG_ZSMALLOC_STAT=n \
- CONFIG_ZRAM_LZ4_COMPRESS=y
+ CONFIG_ZRAM_WRITEBACK=n \
+ CONFIG_ZSMALLOC_STAT=n
FILES:= \
$(LINUX_DIR)/mm/zsmalloc.ko \
$(LINUX_DIR)/drivers/block/zram/zram.ko
Compressed RAM block device support
endef
-$(eval $(call KernelPackage,zram))
+define KernelPackage/zram/config
+ choice
+ prompt "ZRAM Default compressor"
+ default ZRAM_DEF_COMP_LZORLE
+
+ config ZRAM_DEF_COMP_LZORLE
+ bool "lzo-rle"
+ select PACKAGE_kmod-lib-lzo
+ config ZRAM_DEF_COMP_LZO
+ bool "lzo"
+ select PACKAGE_kmod-lib-lzo
+
+ config ZRAM_DEF_COMP_LZ4
+ bool "lz4"
+ select PACKAGE_kmod-lib-lz4
+
+ config ZRAM_DEF_COMP_ZSTD
+ bool "zstd"
+ select PACKAGE_kmod-lib-zstd
+
+ endchoice
+endef
+
+$(eval $(call KernelPackage,zram))
define KernelPackage/pps
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,ptp))
-define KernelPackage/ptp-gianfar
+define KernelPackage/ptp-qoriq
SUBMENU:=$(OTHER_MENU)
- TITLE:=Freescale Gianfar PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-gianfar +kmod-ptp
- KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
- AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
+ TITLE:=Freescale QorIQ PTP support
+ DEPENDS:=@(TARGET_mpc85xx||TARGET_qoriq) +kmod-ptp
+ KCONFIG:=CONFIG_PTP_1588_CLOCK_QORIQ
+ FILES:=$(LINUX_DIR)/drivers/ptp/ptp-qoriq.ko
+ AUTOLOAD:=$(call AutoProbe,ptp-qoriq)
endef
-define KernelPackage/ptp-gianfar/description
+
+define KernelPackage/ptp-qoriq/description
Kernel module for IEEE 1588 support for Freescale
- Gianfar Ethernet drivers
+ QorIQ Ethernet drivers
endef
-$(eval $(call KernelPackage,ptp-gianfar))
-
+$(eval $(call KernelPackage,ptp-qoriq))
define KernelPackage/random-core
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,random-core))
-define KernelPackage/random-omap
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Hardware Random Number Generator OMAP support
- KCONFIG:=CONFIG_HW_RANDOM_OMAP
- FILES:=$(LINUX_DIR)/drivers/char/hw_random/omap-rng.ko
- DEPENDS:=@(TARGET_omap24xx||TARGET_omap) +kmod-random-core
- AUTOLOAD:=$(call AutoProbe,random-omap)
-endef
-
-define KernelPackage/random-omap/description
- Kernel module for the OMAP Random Number Generator
- found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx multimedia processors.
-endef
-
-$(eval $(call KernelPackage,random-omap))
define KernelPackage/thermal
SUBMENU:=$(OTHER_MENU)
- TITLE:=Generic Thermal sysfs driver
+ TITLE:=Thermal driver
DEPENDS:=+kmod-hwmon-core
HIDDEN:=1
KCONFIG:= \
- CONFIG_THERMAL \
+ CONFIG_THERMAL=y \
CONFIG_THERMAL_OF=y \
CONFIG_CPU_THERMAL=y \
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
+ CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 \
CONFIG_THERMAL_GOV_FAIR_SHARE=n \
CONFIG_THERMAL_GOV_STEP_WISE=y \
CONFIG_THERMAL_GOV_USER_SPACE=n \
CONFIG_THERMAL_HWMON=y \
CONFIG_THERMAL_EMULATION=n
- FILES:=$(LINUX_DIR)/drivers/thermal/thermal_sys.ko
- AUTOLOAD:=$(call AutoProbe,thermal_sys)
endef
define KernelPackage/thermal/description
- Generic Thermal Sysfs driver offers a generic mechanism for thermal
- management. Usually it's made up of one or more thermal zone and cooling
- device.
+ Thermal driver offers a generic mechanism for thermal management.
+ Usually it's made up of one or more thermal zone and cooling device.
endef
$(eval $(call KernelPackage,thermal))
-define KernelPackage/thermal-imx
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Temperature sensor driver for Freescale i.MX SoCs
- DEPENDS:=@TARGET_imx6 +kmod-thermal
- KCONFIG:= \
- CONFIG_IMX_THERMAL
- FILES:=$(LINUX_DIR)/drivers/thermal/imx_thermal.ko
- AUTOLOAD:=$(call AutoProbe,imx_thermal)
-endef
-
-define KernelPackage/thermal-imx/description
- Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
- It supports one critical trip point and one passive trip point. The
- cpufreq is used as the cooling device to throttle CPUs when the
- passive trip is crossed.
-endef
-
-$(eval $(call KernelPackage,thermal-imx))
-
-
define KernelPackage/gpio-beeper
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO beeper support
$(eval $(call KernelPackage,echo))
-define KernelPackage/bmp085
+define KernelPackage/keys-encrypted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor
- DEPENDS:= +kmod-regmap @!LINUX_3_18 @!LINUX_4_1
- KCONFIG:= CONFIG_BMP085
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
+ TITLE:=encrypted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-cbc +kmod-crypto-hmac +kmod-crypto-rng \
+ +kmod-crypto-sha256 +kmod-keys-trusted
+ KCONFIG:=CONFIG_ENCRYPTED_KEYS
+ FILES:=$(LINUX_DIR)/security/keys/encrypted-keys/encrypted-keys.ko
+ AUTOLOAD:=$(call AutoLoad,01,encrypted-keys,1)
endef
-define KernelPackage/bmp085/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensors BMP085 and BMP18x.
+define KernelPackage/keys-encrypted/description
+ This module provides support for create/encrypting/decrypting keys
+ in the kernel. Encrypted keys are kernel generated random numbers,
+ which are encrypted/decrypted with a 'master' symmetric key. The
+ 'master' key can be either a trusted-key or user-key type.
+ Userspace only ever sees/stores encrypted blobs.
endef
-$(eval $(call KernelPackage,bmp085))
+$(eval $(call KernelPackage,keys-encrypted))
-define KernelPackage/bmp085-i2c
+define KernelPackage/keys-trusted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor I2C
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_I2C
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
+ TITLE:=TPM trusted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-hash +kmod-crypto-hmac +kmod-crypto-sha1 +kmod-tpm
+ KCONFIG:=CONFIG_TRUSTED_KEYS
+ FILES:= $(LINUX_DIR)/security/keys/trusted-keys/trusted.ko
+ AUTOLOAD:=$(call AutoLoad,01,trusted-keys,1)
endef
-define KernelPackage/bmp085-i2c/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via I2C.
+
+define KernelPackage/keys-trusted/description
+ This module provides support for creating, sealing, and unsealing
+ keys in the kernel. Trusted keys are random number symmetric keys,
+ generated and RSA-sealed by the TPM. The TPM only unseals the keys,
+ if the boot PCRs and other criteria match. Userspace will only ever
+ see encrypted blobs.
+endef
+
+$(eval $(call KernelPackage,keys-trusted))
+
+
+define KernelPackage/tpm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM Hardware Support
+ DEPENDS:= +kmod-random-core +(LINUX_5_15):kmod-asn1-decoder \
+ +(LINUX_5_15):kmod-asn1-encoder +(LINUX_5_15):kmod-oid-registry
+ KCONFIG:= CONFIG_TCG_TPM
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
+ AUTOLOAD:=$(call AutoLoad,10,tpm,1)
+endef
+
+define KernelPackage/tpm/description
+ This enables TPM Hardware Support.
endef
-$(eval $(call KernelPackage,bmp085-i2c))
+$(eval $(call KernelPackage,tpm))
+
+define KernelPackage/tpm-tis
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM TIS 1.2 Interface / TPM 2.0 FIFO Interface
+ DEPENDS:= @TARGET_x86 +kmod-tpm
+ KCONFIG:= CONFIG_TCG_TIS
+ FILES:= \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis.ko \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis_core.ko
+ AUTOLOAD:=$(call AutoLoad,20,tpm_tis,1)
+endef
+
+define KernelPackage/tpm-tis/description
+ If you have a TPM security chip that is compliant with the
+ TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
+ specification (TPM2.0) say Yes and it will be accessible from
+ within Linux.
+endef
+$(eval $(call KernelPackage,tpm-tis))
-define KernelPackage/bmp085-spi
+define KernelPackage/tpm-i2c-atmel
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor SPI
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_SPI
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-spi)
+ TITLE:=TPM I2C Atmel Support
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_ATMEL
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_atmel.ko
+ AUTOLOAD:=$(call AutoLoad,40,tpm_i2c_atmel,1)
endef
-define KernelPackage/bmp085-spi/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via SPI.
+
+define KernelPackage/tpm-i2c-atmel/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Atmel)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-atmel))
+
+define KernelPackage/tpm-i2c-infineon
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:= TPM I2C Infineon driver
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_INFINEON
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_infineon.ko
+ AUTOLOAD:= $(call AutoLoad,40,tpm_i2c_infineon,1)
+endef
+
+define KernelPackage/tpm-i2c-infineon/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Infineon)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-infineon))
+
+
+define KernelPackage/i6300esb-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Intel 6300ESB Timer/Watchdog
+ DEPENDS:=@PCI_SUPPORT @!SMALL_FLASH
+ KCONFIG:=CONFIG_I6300ESB_WDT \
+ CONFIG_WATCHDOG_CORE=y
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/i6300esb.ko
+ AUTOLOAD:=$(call AutoLoad,50,i6300esb,1)
+endef
+
+define KernelPackage/i6300esb-wdt/description
+ Kernel module for the watchdog timer built into the Intel
+ 6300ESB controller hub. Also used by QEMU/libvirt.
+endef
+
+$(eval $(call KernelPackage,i6300esb-wdt))
+
+
+define KernelPackage/mhi-bus
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MHI bus
+ DEPENDS:=@LINUX_5_15
+ KCONFIG:=CONFIG_MHI_BUS \
+ CONFIG_MHI_BUS_DEBUG=y
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/core/mhi.ko
+ AUTOLOAD:=$(call AutoProbe,mhi)
+endef
+
+define KernelPackage/mhi-bus/description
+ Kernel module for the Qualcomm MHI bus.
+endef
+
+$(eval $(call KernelPackage,mhi-bus))
+
+define KernelPackage/mhi-pci-generic
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MHI PCI controller driver
+ DEPENDS:=@LINUX_5_15 +kmod-mhi-bus
+ KCONFIG:=CONFIG_MHI_BUS_PCI_GENERIC
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/mhi_pci_generic.ko
+ AUTOLOAD:=$(call AutoProbe,mhi_pci_generic)
+endef
+
+define KernelPackage/mhi-pci-generic/description
+ Kernel module for the MHI PCI controller driver.
endef
-$(eval $(call KernelPackage,bmp085-spi))
+$(eval $(call KernelPackage,mhi-pci-generic))
projects / openwrt / staging / dedeckeh.git / blobdiff