ar71xx: add support for TP-Link RE450

[openwrt/staging/blogic.git] / target / linux / ar71xx / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index a93ea1d578f508f61b9578ac47e5787071423645..c6dcf36fed408683d2025fbcc273d37fb17a28a4 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -45,7 +45,6 @@ arduino-yun)
        ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
        ;;
-ap113|\
 db120)
        ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
        ;;
@@ -429,6 +428,12 @@ omy-x1)
 qihoo-c301)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
        ;;
+re450)
+       ucidef_set_led_netdev "lan_data" "LAN Data" "$board:green:lan_data" "eth0" "tx rx"
+       ucidef_set_led_netdev "lan_link" "LAN Link" "$board:green:lan_link" "eth0" "link"
+       ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
+       ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
+       ;;
 smart-300)
        ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
@@ -444,6 +449,9 @@ som9331)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "$board:green:system" "1-1"
        ;;
+sr3200)
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
+       ;;
 tellstick-znet-lite)
        ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx"
        ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link"
@@ -597,6 +605,7 @@ tl-wpa8630)
 tl-wr802n-v1)
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
        ;;
+tl-wr940n-v4|\
 tl-wr941nd-v6)
        ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10"
@@ -626,6 +635,15 @@ tl-wr1043nd-v2)
        ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
        ;;
+tl-wr1043nd-v4)
+       ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+       ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+       ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
+       ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+       ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+       ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+       ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+       ;;
 tl-wr2543n)
        ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
        ;;
@@ -738,6 +756,9 @@ wzr-hp-g300nh)
        ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
        ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
        ;;
+xd3200)
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
+       ;;
 z1)
        ucidef_set_led_netdev "wlan1" "WLAN1" "$board:blue:tricolor0" "wlan1"
        ;;