From faf94d926e2810f895f2a98d4a49ee2fe8f673e8 Mon Sep 17 00:00:00 2001 From: Andrew Yong Date: Wed, 19 Oct 2016 04:05:32 +0800 Subject: [PATCH] ramips: add support for MikroTik hEX v3 (RB750Gr3) The MikroTik hEX v3 (RB750Gr3) is a MT7621AT board which is similar to most MT7621 reference designs, it can be easily supported by this patch; however, the stock RouterBOOT bootloader has to be replaced by a MT7621 SDK U-Boot such as https://github.com/ndoo/RB750Gr3-U-Boot - U-Boot configured for the RB750Gr3 (16MiB SPI flash, 256MiB DDR3 RAM at 1200MHz). RouterBOOT, the stock bootloader, does not initialize the UART and boots silently, making it preferable to replace it with a MT7621 SDK U-Boot with UART (57600 8N1) that supports HTTP, TFTP or serial upload of sysupgrade firmware and U-Boot. Furthermore, RouterOS, the stock firmware, is contained in a proprietary modification of SquashFS without GPL sources; UART is also disabled in stock firmware. The combination of LEDE firmware generated by this PR and MT7621 SDK U-Boot expects the printed MAC address to reside at offset `0xe000` of the factory partition (absolute offset is `0x4e000`); this is similar to the factory MAC address offset for several other MT7621 devices. A 16MiB flash dump suitable for use with flashrom will be provided if/once this patch is accepted and binaries are built by LEDE buildbot. Alternatively, writing the U-Boot to the SPI flash starting at 0x0 offset and booting the board with serial console attached will allow TFTP, HTTP or serial upload of sysupgrade firmware. Signed-off-by: Andrew Yong --- .../ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 3 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/RB750Gr3.dts | 121 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 8 ++ 6 files changed, 137 insertions(+) create mode 100644 target/linux/ramips/dts/RB750Gr3.dts diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 99c90e4590..ece48c08e0 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -134,6 +134,7 @@ ramips_setup_interfaces() jhr-n825r|\ jhr-n926r|\ mzk-wdpr|\ + rb750gr3|\ rt-n14u|\ ubnt-erx|\ ur-326n4g|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index ff8f4c5118..a229bbb1a3 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -188,6 +188,9 @@ get_status_led() { wr512-3gn) status_led="$board:green:wps" ;; + rb750gr3) + status_led="$board:green:usr" + ;; sap-g3200u3) status_led="$board:green:usb" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 526a5ae669..50bdffc5fa 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -367,6 +367,9 @@ ramips_board_detect() { *"Q7") name="zte-q7" ;; + *"RB750Gr3") + name="rb750gr3" + ;; *"RE6500") name="re6500" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 9c49c8070d..da496e8ab5 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -105,6 +105,7 @@ platform_check_image() { psg1218|\ psr-680w|\ px-4885|\ + rb750gr3|\ re6500|\ rp-n53|\ rt5350f-olinuxino|\ diff --git a/target/linux/ramips/dts/RB750Gr3.dts b/target/linux/ramips/dts/RB750Gr3.dts new file mode 100644 index 0000000000..d39a2d113b --- /dev/null +++ b/target/linux/ramips/dts/RB750Gr3.dts @@ -0,0 +1,121 @@ +/dts-v1/; + +#include "mt7621.dtsi" +#include +#include + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "MikroTik RB750Gr3"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + usr { + label = "rb750gr3:green:usr"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + mode { + label = "mode"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + res { + label = "res"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; + mtd-mac-address-increment = <1>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "rgmii2", "sdhci"; + ralink,function = "gpio"; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&pcie { + status = "disabled"; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 5974408790..10ab82a82d 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -191,6 +191,14 @@ define Device/vr500 endef TARGET_DEVICES += vr500 +define Device/rb750gr3 + DTS := RB750Gr3 + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := MikroTik RB750Gr3 + DEVICE_PACKAGES := kmod-usb3 kmod-ledtrig-usbdev uboot-envtools -kmod-mt76 -kmod-rt2x00-lib -kmod-mac80211 -kmod-cfg80211 -wpad-mini -iwinfo +endef +TARGET_DEVICES += rb750gr3 + # FIXME: is this still needed? define Image/Prepare #define Build/Compile -- 2.30.2