From a860e439edefc941b1b5e2d4adf3956b353f4f90 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Sat, 17 Jun 2023 02:21:53 +0200 Subject: [PATCH] ipq806x: 6.1: restore missing dts for Netgear XR450 In pushing and refreshing 6.1 pull request, dbac8e8819dd ("ipq806x: 6.1: copy patches, files and config from 5.15") wasn't correctly updated and resulted in missing the dts for Netgear XR450. This caused compilation error with Netgear R7800 or XR500 if testing kernel version was used. Fix this by adding back the missing dts for Netgear XR450 from kernel 5.15. Fixes: dbac8e8819dd ("ipq806x: 6.1: copy patches, files and config from 5.15") Signed-off-by: Christian Marangi --- .../arch/arm/boot/dts/qcom-ipq8065-xr450.dts | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts new file mode 100644 index 0000000000..4353aec7ac --- /dev/null +++ b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq8065-nighthawk.dtsi" + +/ { + model = "Netgear Nighthawk XR450"; + compatible = "netgear,xr450", "qcom,ipq8065", "qcom,ipq8064"; + +}; + +&leds { + usb1 { + label = "white:usb1"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "white:usb2"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; +}; + +&partitions { + partition@1880000 { + label = "ubi"; + reg = <0x1880000 0xce00000>; + }; + + partition@e680000 { + label = "reserve"; + reg = <0xe680000 0x0780000>; + read-only; + }; +}; + +&wifi0 { + nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>; + nvmem-cell-names = "mac-address", "pre-calibration"; +}; + +&wifi1 { + nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>; + nvmem-cell-names = "mac-address", "pre-calibration"; +}; + +&art { + macaddr_art_c: macaddr@c { + reg = <0xc 0x6>; + }; +}; -- 2.30.2