From 58274d68fb1e571fb008a9b7577d68cbddb93cbe Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 2 Aug 2013 15:44:04 +0000 Subject: [PATCH] broadcom-diag: add support for the ASUS RT-N12 This adds button and led info, which I determined by manually poking the gpio values. Signed-off-by: Josh Stone Signed-off-by: Hauke Mehrtens SVN-Revision: 37655 --- package/kernel/broadcom-diag/src/diag.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/package/kernel/broadcom-diag/src/diag.c b/package/kernel/broadcom-diag/src/diag.c index f5c834617f..58d6755389 100644 --- a/package/kernel/broadcom-diag/src/diag.c +++ b/package/kernel/broadcom-diag/src/diag.c @@ -106,6 +106,7 @@ enum { WL520GU, ASUS_4702, WL700GE, + RTN12, RTN16, /* Buffalo */ @@ -634,6 +635,23 @@ static struct platform_t __initdata platforms[] = { }, .platform_init = bcm4780_init, }, + [RTN12] = { + .name = "ASUS RT-N12", + .buttons = { + { .name = "wps", .gpio = 1 << 0 }, + { .name = "reset", .gpio = 1 << 1 }, + // this is the router/repeater/ap switch + { .name = "sw1", .gpio = 1 << 4 }, + { .name = "sw2", .gpio = 1 << 5 }, + { .name = "sw3", .gpio = 1 << 6 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 2, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 7, .polarity = NORMAL }, + // gpio3 forces WAN and LAN1-4 all on + //{ .name = "eth", .gpio = 1 << 3, .polarity = REVERSE }, + }, + }, [RTN16] = { .name = "ASUS RT-N16", .buttons = { @@ -1282,6 +1300,8 @@ static struct platform_t __init *platform_detect(void) printk(MODULE_NAME ": kernel found a \"%s\"\n", board_name); switch(board) { + case BCM47XX_BOARD_ASUS_RTN12: + return &platforms[RTN12]; case BCM47XX_BOARD_ASUS_RTN16: return &platforms[RTN16]; case BCM47XX_BOARD_ASUS_WL330GE: -- 2.30.2