From 337e36e0ef988d850105cfa5f7588e36d90aef2b Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Fri, 6 Aug 2021 12:40:54 +0200 Subject: [PATCH] ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi --- target/linux/ipq806x/Makefile | 2 +- .../ipq806x/base-files/etc/board.d/01_leds | 22 +-- .../ipq806x/base-files/etc/board.d/02_network | 110 +++++--------- .../base-files/etc/board.d/05_compat-version | 45 ++++++ target/linux/ipq806x/config-6.1 | 1 - .../arm/boot/dts/qcom-ipq8062-wg2600hp3.dts | 112 +++++++++++++-- .../boot/dts/qcom-ipq8064-ad7200-c2600.dtsi | 113 +++++++++++++-- .../arch/arm/boot/dts/qcom-ipq8064-ad7200.dts | 26 ++++ .../arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 113 +++++++++++++-- .../arch/arm/boot/dts/qcom-ipq8064-ap161.dts | 116 ++++++++++++--- .../arch/arm/boot/dts/qcom-ipq8064-d7800.dts | 113 +++++++++++++-- .../arch/arm/boot/dts/qcom-ipq8064-db149.dts | 114 +++++++++++++-- .../arm/boot/dts/qcom-ipq8064-ea7500-v1.dts | 26 ++++ .../arch/arm/boot/dts/qcom-ipq8064-ea8500.dts | 6 - .../arm/boot/dts/qcom-ipq8064-eax500.dtsi | 112 +++++++++++++-- .../arch/arm/boot/dts/qcom-ipq8064-g10.dts | 111 ++++++++++++-- .../arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi | 82 +++++++++-- .../arch/arm/boot/dts/qcom-ipq8064-r7500.dts | 111 ++++++++++++-- .../arm/boot/dts/qcom-ipq8064-r7500v2.dts | 113 +++++++++++++-- .../arm/boot/dts/qcom-ipq8064-vr2600v.dts | 113 +++++++++++++-- .../arm/boot/dts/qcom-ipq8064-wg2600hp.dts | 111 ++++++++++++-- .../arch/arm/boot/dts/qcom-ipq8064-wpq864.dts | 113 +++++++++++++-- .../arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts | 117 ++++++++++++--- .../arm/boot/dts/qcom-ipq8065-nbg6817.dts | 130 ++++++++++++----- .../arm/boot/dts/qcom-ipq8065-nighthawk.dtsi | 135 +++++++++++++----- .../boot/dts/qcom-ipq8065-rt4230w-rev6.dts | 113 +++++++++++++-- .../arm/boot/dts/qcom-ipq8065-tr4400-v2.dts | 100 +++++++++++-- target/linux/ipq806x/image/chromium.mk | 7 + target/linux/ipq806x/image/generic.mk | 34 +++++ 29 files changed, 2025 insertions(+), 396 deletions(-) create mode 100644 target/linux/ipq806x/base-files/etc/board.d/05_compat-version diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile index 108abce6b3..74a0007a4e 100644 --- a/target/linux/ipq806x/Makefile +++ b/target/linux/ipq806x/Makefile @@ -16,7 +16,7 @@ KERNELNAME:=zImage Image dtbs include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += \ - kmod-leds-gpio kmod-gpio-button-hotplug swconfig \ + kmod-leds-gpio kmod-gpio-button-hotplug \ kmod-ata-ahci kmod-ata-ahci-platform \ kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \ kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \ diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index d4d40bd646..950b7ad968 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -11,7 +11,7 @@ board=$(board_name) case "$board" in buffalo,wxr-2533dhp) ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "white:internet" "switch0" "0x20" + ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan" ;; compex,wpq864) ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" @@ -28,10 +28,10 @@ meraki,mr52) nec,wg2600hp) ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2" + ucidef_set_led_netdev "wan" "WAN" "green:active" "wan" ;; nec,wg2600hp3) - ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2" + ucidef_set_led_netdev "wan" "WAN" "green:active" "wan" ;; netgear,d7800 |\ netgear,r7500 |\ @@ -41,7 +41,7 @@ netgear,xr450 |\ netgear,xr500) ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1" - ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20" + ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan" ucidef_set_led_ide "esata" "eSATA" "white:esata" ;; nokia,ac400i) @@ -55,8 +55,8 @@ nokia,ac400i) tplink,ad7200) ucidef_set_led_usbport "usb1" "USB 1" "blue:usb1" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB 2" "blue:usb3" "usb3-port1" "usb4-port1" - ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02" - ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c" + ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" + ucidef_set_led_netdev "lan" "lan" "blue:lan" "br-lan" ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt" ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt" ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0" @@ -64,18 +64,18 @@ tplink,ad7200) tplink,c2600) ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1" - ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20" - ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e" + ucidef_set_led_netdev "wan" "wan" "white:wan" "wan" + ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan" ;; tplink,vr2600v) ucidef_set_led_usbport "usb" "USB" "white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" - ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e" + ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan" ucidef_set_led_wlan "wlan2g" "WLAN2G" "white:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "white:wlan5g" "phy1tpt" - ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20" + ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan" ;; zyxel,nbg6817) - ucidef_set_led_netdev "wan" "WAN" "white:internet" "eth1" + ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan" ;; esac diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index bc45298da6..d64805b8f5 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -12,81 +12,50 @@ ipq806x_setup_interfaces() case "$board" in arris,tr4400-v2) - ucidef_set_interfaces_lan_wan "eth1" "eth2" - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "0u@eth0" + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth2" ;; askey,rt4230w-rev6 |\ asrock,g10 |\ - nec,wg2600hp) - ucidef_add_switch "switch0" \ - "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0" - ;; + nec,wg2600hp |\ buffalo,wxr-2533dhp |\ compex,wpq864 |\ netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ - qcom,ipq8064-ap148) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" - ;; - edgecore,ecw5410) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; - linksys,ea7500-v1) - ucidef_add_switch "switch0" \ - "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0" - ;; - linksys,ea8500) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" - ;; - meraki,mr42) - ucidef_set_interface_lan "eth0" - ;; - meraki,mr52) - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ;; - nec,wg2600hp3) - ucidef_add_switch "switch0" \ - "2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0" - ;; + qcom,ipq8064-ap148 |\ + linksys,ea7500-v1 |\ + linksys,ea8500 |\ + nec,wg2600hp3 |\ netgear,r7800 |\ - netgear,xr450 |\ netgear,xr500 |\ + netgear,xr450 |\ tplink,c2600 |\ - tplink,vr2600v) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" - ;; - qcom,ipq8064-ap161) - ucidef_set_interface_lan "eth1 eth2" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0" - ;; - qcom,ipq8064-db149) - ucidef_set_interface_lan "eth1 eth2 eth3" - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0" - ;; - tplink,ad7200) - ucidef_add_switch "switch0" \ - "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0" + tplink,vr2600v |\ + tplink,ad7200 |\ + zyxel,nbg6817) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; asus,onhub |\ tplink,onhub) + ucidef_set_interfaces_lan_wan "lan1" "wan" + ;; + edgecore,ecw5410) ucidef_set_interfaces_lan_wan "eth1" "eth0" - ucidef_add_switch "switch0" \ - "1:lan" "6@eth1" "2:wan" "0@eth0" ;; - nokia,ac400i |\ + qcom,ipq8064-ap161) + ucidef_set_interface_lan "eth1 eth2 lan1 lan2 lan3 lan4" "wan" + ;; + qcom,ipq8064-db149) + ucidef_set_interface_lan "eth1 eth2 eth3 lan1 lan2 lan3 lan4" "wan" + ;; ubnt,unifi-ac-hd) ucidef_set_interface_lan "eth0 eth1" ;; - zyxel,nbg6817) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" + meraki,mr42) + ucidef_set_interface_lan "eth0" + ;; + meraki,mr52) + ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; *) echo "Unsupported hardware. Network interfaces not intialized" @@ -94,34 +63,33 @@ ipq806x_setup_interfaces() esac } -ipq806x_setup_mac_address() +ipq806x_setup_macs() { local board="$1" case "$board" in - linksys,ea7500-v1) - hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) - ucidef_set_interface_macaddr "lan" "$hw_mac_addr" - ucidef_set_interface_macaddr "wan" "$hw_mac_addr" + linksys,ea7500-v1) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ucidef_set_interface_macaddr "lan" "$hw_mac_addr" + ucidef_set_interface_macaddr "wan" "$hw_mac_addr" ;; - linksys,ea8500) - hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) - ucidef_set_interface_macaddr "lan" "$hw_mac_addr" - ucidef_set_interface_macaddr "wan" "$hw_mac_addr" + linksys,ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ucidef_set_interface_macaddr "lan" "$hw_mac_addr" + ucidef_set_interface_macaddr "wan" "$hw_mac_addr" ;; - zyxel,nbg6817) - hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr) - ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)" - ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)" + zyxel,nbg6817) + hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr) + ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)" + ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)" ;; esac } board_config_update - board=$(board_name) -ipq806x_setup_mac_address $board +ipq806x_setup_macs $board ipq806x_setup_interfaces $board board_config_flush diff --git a/target/linux/ipq806x/base-files/etc/board.d/05_compat-version b/target/linux/ipq806x/base-files/etc/board.d/05_compat-version new file mode 100644 index 0000000000..74135b0d62 --- /dev/null +++ b/target/linux/ipq806x/base-files/etc/board.d/05_compat-version @@ -0,0 +1,45 @@ +#!/bin/sh +# +# Copyright (C) 2020 OpenWrt.org +# + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in + arris,tr4400-v2 |\ + askey,rt4230w-rev6 |\ + asrock,g10 |\ + buffalo,wxr-2533dhp |\ + compex,wpq864 |\ + nec,wg2600hp |\ + nec,wg2600hp3 |\ + netgear,d7800 |\ + netgear,r7500 |\ + netgear,r7500v2 |\ + netgear,r7800 |\ + netgear,xr450 |\ + netgear,xr500 |\ + nokia,ac400i |\ + qcom,ipq8064-ap148 |\ + qcom,ipq8064-ap161 |\ + qcom,ipq8064-db149 |\ + tplink,ad7200 |\ + tplink,c2600 |\ + tplink,vr2600v |\ + zyxel,nbg6817 |\ + asus,onhub |\ + tplink,onhub) + ucidef_set_compat_version "1.1" + ;; + linksys,ea7500-v1 |\ + linksys,ea8500) + ucidef_set_compat_version "2.1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ipq806x/config-6.1 b/target/linux/ipq806x/config-6.1 index 960e16ae74..a1214dc917 100644 --- a/target/linux/ipq806x/config-6.1 +++ b/target/linux/ipq806x/config-6.1 @@ -1,7 +1,6 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_APQ_GCC_8084 is not set # CONFIG_APQ_MMCC_8084 is not set -CONFIG_AR8216_PHY=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_ARCH_IPQ40XX is not set diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts index c55287a4f1..e3987c6d07 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts @@ -413,21 +413,103 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x04 0x80080080 /* PAD0_MODE */ - 0x0c 0x06000000 /* PAD6_MODE */ - 0x10 0x002613a0 /* PWS_REG */ - 0x50 0xcc36cc36 /* LED_CTRL0 */ - 0x54 0xca36ca36 /* LED_CTRL1 */ - 0x58 0xc936c936 /* LED_CTRL2 */ - 0x5c 0x03ffff00 /* LED_CTRL3 */ - 0x7c 0x0000004e /* PORT0_STATUS */ - 0x94 0x0000004e /* PORT6_STATUS */ - 0xe0 0xc74164de /* SGMII_CTRL */ - 0xe4 0x0006a545 /* MAC_PWR_SEL */ - >; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi index 3494b2bde2..9d05cf4032 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi @@ -337,21 +337,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - phy4: ethernet-phy@4 { - reg = <4>; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts index 6cb21fc4f3..f76e098d9e 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts @@ -129,6 +129,32 @@ }; }; +&mdio0 { + switch@10 { + ports { + port@1 { + label = "wan"; + }; + + port@2 { + label = "lan1"; + }; + + port@3 { + label = "lan2"; + }; + + port@4 { + label = "lan3"; + }; + + port@5 { + label = "lan4"; + }; + }; + }; +}; + &pcie2 { status = "okay"; max-link-speed = <1>; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index d3b7c44877..bd8f0d6019 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -90,21 +90,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy4: ethernet-phy@4 { - reg = <4>; + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts index 02ddbf3118..9d0b451f43 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts @@ -102,24 +102,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x20080 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy4: ethernet-phy@4 { - reg = <4>; - qca,phy-rgmii-en; - qca,txclk-delay-en; - qca,rxclk-delay-en; + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; phy3: ethernet-phy@3 { diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts index b8273c614a..c8e4a1810e 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -340,21 +340,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - phy4: ethernet-phy@4 { - reg = <4>; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts index f628df919b..063f27c6d2 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts @@ -117,21 +117,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; - phy4: ethernet-phy@4 { - reg = <4>; + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; phy6: ethernet-phy@6 { @@ -147,7 +232,6 @@ status = "okay"; phy-mode = "rgmii"; qcom,id = <0>; - phy-handle = <&phy4>; pinctrl-0 = <&rgmii0_pins>; pinctrl-names = "default"; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts index 9d82d52d27..aab44ea9e3 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts @@ -89,3 +89,29 @@ reg = <0x6080000 0x1f80000>; }; }; + +&mdio0 { + switch@10 { + ports { + port@1 { + label = "wan"; + }; + + port@2 { + label = "lan1"; + }; + + port@3 { + label = "lan2"; + }; + + port@4 { + label = "lan3"; + }; + + port@5 { + label = "lan4"; + }; + }; + }; +}; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts index 1c6a4bdacd..bc3a2c3049 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -106,12 +106,6 @@ }; }; -&mdio0 { - phy4: ethernet-phy@4 { - reg = <4>; - }; -}; - &gmac1 { qcom,phy_mdio_addr = <4>; qcom,poll_required = <1>; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi index 910bd86bc5..fac43e785f 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi @@ -185,18 +185,106 @@ reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>; reset-post-delay-us = <12000>; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x00010 0x2613a0 /* PWS_REG */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts index 63a72b53ae..6795e8fa4f 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts @@ -158,17 +158,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi index 5366105954..d20b55c2c2 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi @@ -62,21 +62,73 @@ pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy1: ethernet-phy@1 { - reg = <1>; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts index 7bea5b6bce..ff464d9d1e 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts @@ -254,21 +254,104 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - phy4: ethernet-phy@4 { - reg = <4>; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts index 6f0ba09c87..030d445668 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts @@ -337,21 +337,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - phy4: ethernet-phy@4 { - reg = <4>; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts index b0db8c8863..4fddf5e90a 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts @@ -369,21 +369,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - phy4: ethernet-phy@4 { - reg = <4>; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts index 431c9cd9af..47829a08aa 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts @@ -141,20 +141,105 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x06000000 /* PAD0_MODE */ - 0x0000c 0x00080080 /* PAD6_MODE */ - 0x000e4 0x0006a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x0000004e /* PORT0_STATUS */ - 0x00094 0x0000004e /* PORT6_STATUS */ - >; - }; +switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; - ethernet-phy@4 { - reg = <4>; + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts index 359b4cd470..37055f110b 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts @@ -270,21 +270,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - ethernet-phy@4 { - reg = <4>; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts index 39fd81fe55..97d76e11f0 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts @@ -195,25 +195,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x07600000 /* PAD0_MODE */ - 0x00008 0x01000000 /* PAD5_MODE */ - 0x0000c 0x00000080 /* PAD6_MODE */ - 0x00050 0xcc35cc35 /* LED_CTRL0 */ - 0x00054 0xca35ca35 /* LED_CTRL1 */ - 0x00058 0xc935c935 /* LED_CTRL2 */ - 0x0005c 0x03ffff00 /* LED_CTRL3 */ - 0x000e4 0x0006a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x0000007e /* PORT0_STATUS */ - 0x00094 0x0000007e /* PORT6_STATUS */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - ethernet-phy@4 { - reg = <4>; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts index 60a949f44e..96becfb4c1 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts @@ -245,40 +245,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ - 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ - 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ - 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ - 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ - 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ - 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ - 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ - 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ - 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ - 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ - 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ - 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ - 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ - >; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; - phy4: ethernet-phy@4 { - reg = <4>; - qca,ar8327-initvals = < - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x0000c 0x80 /* PAD6_MODE */ - >; + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi index 2328c497ea..ecd2c5634a 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi @@ -302,43 +302,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ - 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ - 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ - 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ - 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ - 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ - 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ - 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ - 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ - 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ - 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ - 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ - 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ - 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ - >; - qca,ar8327-vlans = < - 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */ - 0x2 0x21 /* VLAN2 Ports 0/5 */ - >; - }; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; - phy4: ethernet-phy@4 { - reg = <4>; - qca,ar8327-initvals = < - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x0000c 0x80 /* PAD6_MODE */ - >; + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts index 8d9601b632..87948bb1d6 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts @@ -297,19 +297,106 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0x0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - 0x00050 0xcf02cf02 /* LED_CTRL_0 */ - 0x00054 0xc832c832 /* LED_CTRL_1 */ - >; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port5>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac2>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts index 7b236af253..bb00bbe7d3 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts @@ -311,17 +311,95 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - ethernet-phy@0 { - reg = <0x0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <1000>; + rx-internal-delay-ps = <1000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy_port4>; + }; + + /* + port@6 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + asym-pause; + }; + }; + */ + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + }; }; phy7: ethernet-phy@7 { diff --git a/target/linux/ipq806x/image/chromium.mk b/target/linux/ipq806x/image/chromium.mk index ba98929976..637f17a94a 100644 --- a/target/linux/ipq806x/image/chromium.mk +++ b/target/linux/ipq806x/image/chromium.mk @@ -1,3 +1,8 @@ +define Device/dsa-migration + DEVICE_COMPAT_VERSION := 1.1 + DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA +endef + define Build/cros-gpt cp $@ $@.tmp 2>/dev/null || true ptgen -o $@.tmp -g \ @@ -47,6 +52,7 @@ endef define Device/asus_onhub $(call Device/OnhubImage) + $(Device/dsa-migration) DEVICE_VENDOR := ASUS DEVICE_MODEL := OnHub SRT-AC1900 DEVICE_DTS := $$(SOC)-asus-onhub @@ -56,6 +62,7 @@ TARGET_DEVICES += asus_onhub define Device/tplink_onhub $(call Device/OnhubImage) + $(Device/dsa-migration) DEVICE_VENDOR := TP-Link DEVICE_MODEL := OnHub AC1900 Cloud Router DEVICE_DTS := $$(SOC)-tplink-onhub diff --git a/target/linux/ipq806x/image/generic.mk b/target/linux/ipq806x/image/generic.mk index a3e9eb59e7..0339a612d8 100644 --- a/target/linux/ipq806x/image/generic.mk +++ b/target/linux/ipq806x/image/generic.mk @@ -8,6 +8,16 @@ define Device/kernel-size-migration use the force flag when image check fails. Settings will be lost. *** endef +define Device/dsa-migration + DEVICE_COMPAT_VERSION := 1.1 + DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA +endef + +define Device/dsa-migration-from-2_0 + DEVICE_COMPAT_VERSION := 2.1 + DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA +endef + define Build/buffalo-rootfs-cksum ( \ echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \ @@ -67,6 +77,7 @@ endef define Device/arris_tr4400-v2 $(call Device/LegacyImage) + $(Device/dsa-migration) DEVICE_VENDOR := Arris DEVICE_MODEL := TR4400 DEVICE_VARIANT := v2 @@ -80,6 +91,7 @@ TARGET_DEVICES += arris_tr4400-v2 define Device/askey_rt4230w-rev6 $(call Device/LegacyImage) + $(Device/dsa-migration) DEVICE_VENDOR := Askey DEVICE_MODEL := RT4230W DEVICE_VARIANT := REV6 @@ -94,6 +106,7 @@ TARGET_DEVICES += askey_rt4230w-rev6 define Device/asrock_g10 $(call Device/FitImage) $(call Device/UbiFit) + $(Device/dsa-migration) SOC := qcom-ipq8064 DEVICE_VENDOR := ASRock DEVICE_MODEL := G10 @@ -107,6 +120,7 @@ TARGET_DEVICES += asrock_g10 define Device/buffalo_wxr-2533dhp $(call Device/LegacyImage) + $(Device/dsa-migration) SOC := qcom-ipq8064 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WXR-2533DHP @@ -123,6 +137,7 @@ TARGET_DEVICES += buffalo_wxr-2533dhp define Device/compex_wpq864 $(call Device/FitImage) $(call Device/UbiFit) + $(Device/dsa-migration) DEVICE_VENDOR := Compex DEVICE_MODEL := WPQ864 BLOCKSIZE := 128k @@ -148,6 +163,7 @@ TARGET_DEVICES += edgecore_ecw5410 define Device/linksys_ea7500-v1 $(call Device/LegacyImage) $(Device/kernel-size-migration) + $(Device/dsa-migration-from-2_0) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA7500 DEVICE_VARIANT := v1 @@ -168,6 +184,7 @@ TARGET_DEVICES += linksys_ea7500-v1 define Device/linksys_ea8500 $(call Device/LegacyImage) $(Device/kernel-size-migration) + $(Device/dsa-migration-from-2_0) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA8500 SOC := qcom-ipq8064 @@ -223,6 +240,7 @@ TARGET_DEVICES += meraki_mr52 define Device/nec_wg2600hp $(call Device/LegacyImage) + $(Device/dsa-migration) DEVICE_VENDOR := NEC DEVICE_MODEL := Aterm WG2600HP SOC := qcom-ipq8064 @@ -236,6 +254,7 @@ TARGET_DEVICES += nec_wg2600hp define Device/nec_wg2600hp3 $(call Device/LegacyImage) + $(Device/dsa-migration) DEVICE_VENDOR := NEC Platforms DEVICE_MODEL := Aterm WG2600HP3 SOC := qcom-ipq8062 @@ -252,6 +271,7 @@ TARGET_DEVICES += nec_wg2600hp3 define Device/netgear_d7800 $(call Device/DniImage) + $(Device/dsa-migration) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 D7800 SOC := qcom-ipq8064 @@ -271,6 +291,7 @@ TARGET_DEVICES += netgear_d7800 define Device/netgear_r7500 $(call Device/DniImage) + $(Device/dsa-migration) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 R7500 DEVICE_VARIANT := v1 @@ -288,6 +309,7 @@ TARGET_DEVICES += netgear_r7500 define Device/netgear_r7500v2 $(call Device/DniImage) + $(Device/dsa-migration) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 R7500 DEVICE_VARIANT := v2 @@ -306,6 +328,7 @@ TARGET_DEVICES += netgear_r7500v2 define Device/netgear_r7800 $(call Device/DniImage) + $(Device/dsa-migration) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4S R7800 SOC := qcom-ipq8065 @@ -322,6 +345,7 @@ TARGET_DEVICES += netgear_r7800 define Device/netgear_xr450 $(call Device/DniImage) + $(Device/dsa-migration) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk XR450 SOC := qcom-ipq8065 @@ -336,6 +360,7 @@ TARGET_DEVICES += netgear_xr450 define Device/netgear_xr500 $(call Device/DniImage) + $(Device/dsa-migration) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk XR500 SOC := qcom-ipq8065 @@ -351,6 +376,7 @@ TARGET_DEVICES += netgear_xr500 define Device/nokia_ac400i $(call Device/FitImage) $(call Device/UbiFit) + $(Device/dsa-migration) DEVICE_VENDOR := Nokia DEVICE_MODEL := AC400i SOC := qcom-ipq8065 @@ -365,6 +391,7 @@ TARGET_DEVICES += nokia_ac400i define Device/qcom_ipq8064-ap148 $(call Device/FitImage) $(call Device/UbiFit) + $(Device/dsa-migration) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP148 DEVICE_VARIANT := standard @@ -382,6 +409,7 @@ TARGET_DEVICES += qcom_ipq8064-ap148 define Device/qcom_ipq8064-ap148-legacy $(call Device/LegacyImage) $(call Device/UbiFit) + $(Device/dsa-migration) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP148 DEVICE_VARIANT := legacy @@ -398,6 +426,7 @@ TARGET_DEVICES += qcom_ipq8064-ap148-legacy define Device/qcom_ipq8064-ap161 $(call Device/FitImage) $(call Device/UbiFit) + $(Device/dsa-migration) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP161 SOC := qcom-ipq8064 @@ -412,6 +441,7 @@ TARGET_DEVICES += qcom_ipq8064-ap161 define Device/qcom_ipq8064-db149 $(call Device/FitImage) + $(Device/dsa-migration) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := DB149 SOC := qcom-ipq8064 @@ -424,6 +454,7 @@ TARGET_DEVICES += qcom_ipq8064-db149 define Device/tplink_ad7200 $(call Device/TpSafeImage) + $(Device/dsa-migration) DEVICE_VENDOR := TP-Link DEVICE_MODEL := AD7200 DEVICE_VARIANT := v1/v2 @@ -440,6 +471,7 @@ TARGET_DEVICES += tplink_ad7200 define Device/tplink_c2600 $(call Device/TpSafeImage) + $(Device/dsa-migration) DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer C2600 DEVICE_VARIANT := v1 @@ -454,6 +486,7 @@ endef TARGET_DEVICES += tplink_c2600 define Device/tplink_vr2600v + $(Device/dsa-migration) DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer VR2600v DEVICE_VARIANT := v1 @@ -486,6 +519,7 @@ endef TARGET_DEVICES += ubnt_unifi-ac-hd define Device/zyxel_nbg6817 + $(Device/dsa-migration) DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NBG6817 SOC := qcom-ipq8065 -- 2.30.2