From 2b664499cd6223b8063c648d8b1499431bc1103f Mon Sep 17 00:00:00 2001 From: Etienne Haarsma Date: Fri, 1 Dec 2017 18:26:40 +0100 Subject: [PATCH] kernel: bump 4.4 to 4.4.103 for 17.01 Refreshed all patches. Removed upstream ramips patches: 0101-MIPS-ralink-Fix-MT7628-pinmux.patch 0102--MIPS-ralink-Fix-typo-in-mt7628-pinmux-function.patch Compile-tested: ar71xx Run-tested: ar71xx Signed-off-by: Etienne Haarsma --- include/kernel-version.mk | 4 +-- .../432-spi-rb4xx-spi-driver.patch | 2 +- .../433-spi-rb4xx-cpld-driver.patch | 2 +- .../patches-4.4/435-spi-vsc7385_driver.patch | 2 +- ...-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch | 2 +- ...ng-with-source-address-failed-policy.patch | 8 ++--- .../patches-4.4/904-debloat_dma_buf.patch | 2 +- ...dd-support-for-Lantiq-SPI-controller.patch | 2 +- ...SPI-ralink-add-Ralink-SoC-spi-driver.patch | 2 +- .../0043-spi-add-mt7621-support.patch | 2 +- .../0101-MIPS-ralink-Fix-MT7628-pinmux.patch | 33 ------------------- ...-ralink-Fix-typo-in-mt7628-pinmux-function | 31 ----------------- 12 files changed, 14 insertions(+), 78 deletions(-) delete mode 100644 target/linux/ramips/patches-4.4/0101-MIPS-ralink-Fix-MT7628-pinmux.patch delete mode 100644 target/linux/ramips/patches-4.4/0102--MIPS-ralink-Fix-typo-in-mt7628-pinmux-function diff --git a/include/kernel-version.mk b/include/kernel-version.mk index b36b6394ab..e90a3c70ab 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -3,10 +3,10 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .43 -LINUX_VERSION-4.4 = .102 +LINUX_VERSION-4.4 = .103 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c -LINUX_KERNEL_HASH-4.4.102 = ede2c22a559e1d894161d53e1d634ee969380a159642aafc0c9c268daf8eaafe +LINUX_KERNEL_HASH-4.4.103 = 1d01d0785fdf52b3f3b9f7ad05b6cff6be034869935962478e19f265b022f904 ifdef KERNEL_PATCHVER LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER))) diff --git a/target/linux/ar71xx/patches-4.4/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-4.4/432-spi-rb4xx-spi-driver.patch index 7d99c43b95..d6b71be46a 100644 --- a/target/linux/ar71xx/patches-4.4/432-spi-rb4xx-spi-driver.patch +++ b/target/linux/ar71xx/patches-4.4/432-spi-rb4xx-spi-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -477,6 +477,12 @@ config SPI_QUP +@@ -478,6 +478,12 @@ config SPI_QUP This driver can also be built as a module. If so, the module will be called spi_qup. diff --git a/target/linux/ar71xx/patches-4.4/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-4.4/433-spi-rb4xx-cpld-driver.patch index 0932c729f9..61c186ce9e 100644 --- a/target/linux/ar71xx/patches-4.4/433-spi-rb4xx-cpld-driver.patch +++ b/target/linux/ar71xx/patches-4.4/433-spi-rb4xx-cpld-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -713,6 +713,13 @@ config SPI_TLE62X0 +@@ -714,6 +714,13 @@ config SPI_TLE62X0 sysfs interface, with each line presented as a kind of GPIO exposing both switch control and diagnostic feedback. diff --git a/target/linux/ar71xx/patches-4.4/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-4.4/435-spi-vsc7385_driver.patch index 880c088c56..94dd1d4508 100644 --- a/target/linux/ar71xx/patches-4.4/435-spi-vsc7385_driver.patch +++ b/target/linux/ar71xx/patches-4.4/435-spi-vsc7385_driver.patch @@ -1,6 +1,6 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -720,6 +720,11 @@ config SPI_RB4XX_CPLD +@@ -721,6 +721,11 @@ config SPI_RB4XX_CPLD SPI driver for the Xilinx CPLD chip present on the MikroTik RB4xx boards. diff --git a/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch b/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch index c1f565a307..b5306a7dbe 100644 --- a/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch +++ b/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch @@ -1,6 +1,6 @@ --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c -@@ -1967,7 +1967,8 @@ static void pcie_write_mrrs(struct pci_d +@@ -1978,7 +1978,8 @@ static void pcie_write_mrrs(struct pci_d /* In the "safe" case, do not configure the MRRS. There appear to be * issues with setting MRRS to 0 on a number of devices. */ diff --git a/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch index c5f3e195da..4bf34c128e 100644 --- a/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch +++ b/target/linux/generic/patches-4.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch @@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski net->ipv6.ip6_blk_hole_entry->dst.dev = dev; net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev); #endif -@@ -3597,6 +3636,17 @@ static int __net_init ip6_route_net_init +@@ -3601,6 +3640,17 @@ static int __net_init ip6_route_net_init net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops; dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst, ip6_template_metrics, true); @@ -220,7 +220,7 @@ Signed-off-by: Jonas Gorski #endif net->ipv6.sysctl.flush_delay = 0; -@@ -3615,6 +3665,8 @@ out: +@@ -3619,6 +3669,8 @@ out: return ret; #ifdef CONFIG_IPV6_MULTIPLE_TABLES @@ -229,7 +229,7 @@ Signed-off-by: Jonas Gorski out_ip6_prohibit_entry: kfree(net->ipv6.ip6_prohibit_entry); out_ip6_null_entry: -@@ -3632,6 +3684,7 @@ static void __net_exit ip6_route_net_exi +@@ -3636,6 +3688,7 @@ static void __net_exit ip6_route_net_exi #ifdef CONFIG_IPV6_MULTIPLE_TABLES kfree(net->ipv6.ip6_prohibit_entry); kfree(net->ipv6.ip6_blk_hole_entry); @@ -237,7 +237,7 @@ Signed-off-by: Jonas Gorski #endif dst_entries_destroy(&net->ipv6.ip6_dst_ops); } -@@ -3705,6 +3758,9 @@ void __init ip6_route_init_special_entri +@@ -3709,6 +3762,9 @@ void __init ip6_route_init_special_entri init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev; init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); diff --git a/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch b/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch index 10613de852..eac39669d0 100644 --- a/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch +++ b/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch @@ -34,7 +34,7 @@ +MODULE_LICENSE("GPL"); --- a/kernel/sched/core.c +++ b/kernel/sched/core.c -@@ -2097,6 +2097,7 @@ int wake_up_state(struct task_struct *p, +@@ -2096,6 +2096,7 @@ int wake_up_state(struct task_struct *p, { return try_to_wake_up(p, state, 0); } diff --git a/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch b/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch index 3dc60a7032..daec87c433 100644 --- a/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch +++ b/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch @@ -13,7 +13,7 @@ Signed-off-by: Daniel Schwierzeck --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -355,6 +355,13 @@ config SPI_MT65XX +@@ -356,6 +356,13 @@ config SPI_MT65XX say Y or M here.If you are not sure, say N. SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs. diff --git a/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch index 642632628b..f79f2cfc5f 100644 --- a/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch +++ b/target/linux/ramips/patches-4.4/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch @@ -16,7 +16,7 @@ Acked-by: John Crispin --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -477,6 +477,12 @@ config SPI_QUP +@@ -478,6 +478,12 @@ config SPI_QUP This driver can also be built as a module. If so, the module will be called spi_qup. diff --git a/target/linux/ramips/patches-4.4/0043-spi-add-mt7621-support.patch b/target/linux/ramips/patches-4.4/0043-spi-add-mt7621-support.patch index 8a78bda840..13936b2e1f 100644 --- a/target/linux/ramips/patches-4.4/0043-spi-add-mt7621-support.patch +++ b/target/linux/ramips/patches-4.4/0043-spi-add-mt7621-support.patch @@ -13,7 +13,7 @@ Signed-off-by: John Crispin --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -483,6 +483,12 @@ config SPI_RT2880 +@@ -484,6 +484,12 @@ config SPI_RT2880 help This selects a driver for the Ralink RT288x/RT305x SPI Controller. diff --git a/target/linux/ramips/patches-4.4/0101-MIPS-ralink-Fix-MT7628-pinmux.patch b/target/linux/ramips/patches-4.4/0101-MIPS-ralink-Fix-MT7628-pinmux.patch deleted file mode 100644 index f2d1ab1706..0000000000 --- a/target/linux/ramips/patches-4.4/0101-MIPS-ralink-Fix-MT7628-pinmux.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 8ef4b43cd3794d63052d85898e42424fd3b14d24 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin -Date: Thu, 11 May 2017 08:11:14 +0200 -Subject: [PATCH 1/2] MIPS: ralink: Fix MT7628 pinmux - -According to the datasheet the REFCLK pin is shared with GPIO#37 and -the PERST pin is shared with GPIO#36. - -Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support") -Signed-off-by: Mathias Kresin -Acked-by: John Crispin -Cc: Ralf Baechle -Cc: linux-mips@linux-mips.org -Cc: # 3.19+ -Patchwork: https://patchwork.linux-mips.org/patch/16046/ -Signed-off-by: James Hogan ---- - arch/mips/ralink/mt7620.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ralink/mt7620.c -+++ b/arch/mips/ralink/mt7620.c -@@ -141,8 +141,8 @@ static struct rt2880_pmx_func i2c_grp_mt - FUNC("i2c", 0, 4, 2), - }; - --static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) }; --static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) }; -+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 37, 1) }; -+static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) }; - static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) }; - static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; - diff --git a/target/linux/ramips/patches-4.4/0102--MIPS-ralink-Fix-typo-in-mt7628-pinmux-function b/target/linux/ramips/patches-4.4/0102--MIPS-ralink-Fix-typo-in-mt7628-pinmux-function deleted file mode 100644 index 9c77840f2c..0000000000 --- a/target/linux/ramips/patches-4.4/0102--MIPS-ralink-Fix-typo-in-mt7628-pinmux-function +++ /dev/null @@ -1,31 +0,0 @@ -From 05a67cc258e75ac9758e6f13d26337b8be51162a Mon Sep 17 00:00:00 2001 -From: Mathias Kresin -Date: Thu, 11 May 2017 08:11:15 +0200 -Subject: [PATCH 2/2] MIPS: ralink: Fix typo in mt7628 pinmux function - -There is a typo inside the pinmux setup code. The function is called -refclk and not reclk. - -Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support") -Signed-off-by: Mathias Kresin -Acked-by: John Crispin -Cc: Ralf Baechle -Cc: linux-mips@linux-mips.org -Cc: # 3.19+ -Patchwork: https://patchwork.linux-mips.org/patch/16047/ -Signed-off-by: James Hogan ---- - arch/mips/ralink/mt7620.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/ralink/mt7620.c -+++ b/arch/mips/ralink/mt7620.c -@@ -141,7 +141,7 @@ static struct rt2880_pmx_func i2c_grp_mt - FUNC("i2c", 0, 4, 2), - }; - --static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 37, 1) }; -+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) }; - static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) }; - static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) }; - static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; -- 2.30.2