From: Alexey Bartenev <41exey@proton.me> Date: Mon, 24 Oct 2022 15:50:33 +0000 (+0700) Subject: ramips: add support for SNR-CPE-W4N-MT router X-Git-Tag: v23.05.0-rc1~1528 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=3f201d1f8ece4ed363428f353558d44f9dbe98a5 ramips: add support for SNR-CPE-W4N-MT router General specification: - SoC Type: MediaTek MT7620N (580MHz) - ROM: 8 MB SPI-NOR (W25Q64FV) - RAM: 64 MB DDR (M13S5121632A) - Switch: MediaTek MT7530 - Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) - Wireless 2.4 GHz: b/g/n - Buttons: 1 button (RESET) - Bootloader: U-Boot 1.1.3, MediaTek U-Boot: 5.0.0.5 - Power: 12 VDC, 1.0 A Flash by the native uploader in 2 stages: 1. Use the native uploader to flash an initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-initramfs-kernel.bin file by "Administration/Management/Firmware update/Choose File" in vendor's web interface (ip: 192.168.1.10, login: Admin, password: Admin). Wait ~160 seconds. 2. Flash a sysupgrade image via the initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin file by "System/Backup/Flash Firmware/Flash image..." in LuCI web interface (ip: 192.168.1.1, login: root, no password). Wait ~240 seconds. Flash by U-Boot TFTP method: 1. Configure your PC with IP 192.168.1.131 2. Set up TFTP server and put the openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin image on your PC 3. Connect serial port (57600 8N1) and turn on the router. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load system code then write to Flash via TFTP."). Press Y key when show "Warning!! Erase Linux in Flash then burn new one. Are you sure? (Y/N)" Input device IP (192.168.1.1) ==:192.168.1.1 Input server IP (192.168.1.131) ==:192.168.1.131 Input Linux Kernel filename () ==: openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin 3. Wait ~120 seconds to complete flashing Signed-off-by: Alexey Bartenev <41exey@proton.me> --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index 62c0908a6f..9cb47cd774 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -79,6 +79,11 @@ linksys,ea8100-v2|\ mts,wg430223) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" ;; +snr,cpe-w4n-mt) + idx="$(find_mtd_index uboot-env)" + [ -n "$idx" ] && \ + ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x1000" "0x1000" + ;; xiaomi,mi-router-3g-v2|\ xiaomi,mi-router-4a-gigabit|\ xiaomi,miwifi-3c) diff --git a/target/linux/ramips/dts/mt7620n_snr_cpe-w4n-mt.dts b/target/linux/ramips/dts/mt7620n_snr_cpe-w4n-mt.dts new file mode 100644 index 0000000000..97e6043642 --- /dev/null +++ b/target/linux/ramips/dts/mt7620n_snr_cpe-w4n-mt.dts @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620n.dtsi" + +#include +#include +#include + +/ { + compatible = "snr,cpe-w4n-mt", "ralink,mt7620n-soc"; + model = "SNR-CPE-W4N (rev.M)"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_sys; + led-running = &led_wps; + led-upgrade = &led_sys; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; // GPIO#38 + panic-indicator; + }; + + led_wps: wps { + label = "green:wps"; + color = ; + function = LED_FUNCTION_WPS; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; // GPIO#39 + }; + + wlan { + label = "green:wlan"; + color = ; + function = LED_FUNCTION_WLAN; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; // GPIO#72 + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset Button"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; // GPIO#1 + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <48000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "Config"; + reg = <0x30000 0x10000>; + }; + + factory: partition@40000 { + label = "Factory"; + reg = <0x40000 0x100000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + + partition@30000_1 { + label = "uboot-env"; + reg = <0x30000 0x1000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "spi refclk"; + function = "gpio"; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 7fff06665e..445d3dec34 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -1104,6 +1104,17 @@ define Device/sitecom_wlr-4100-v1-002 endef TARGET_DEVICES += sitecom_wlr-4100-v1-002 +define Device/snr_cpe-w4n-mt + $(Device/uimage-lzma-loader) + SOC := mt7620n + IMAGE_SIZE := 7360k + DEVICE_VENDOR := SNR + DEVICE_MODEL := CPE-W4N + DEVICE_VARIANT := MT + UIMAGE_NAME := SNR-CPE-W4N-MT +endef +TARGET_DEVICES += snr_cpe-w4n-mt + define Device/tplink_archer-c20i $(Device/tplink-v2) SOC := mt7620a diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index d52beefdcc..36e3045a38 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -151,6 +151,11 @@ kingston,mlwg2|\ sanlinking,d240) ucidef_set_led_netdev "wifi_led" "wifi" "blue:wifi" "wlan0" ;; +snr,cpe-w4n-mt) + ucidef_set_led_heartbeat "wps" "WPS" "green:wps" + ucidef_set_led_timer "sys" "System" "green:sys" "500" "500" + ucidef_set_led_wlan "wlan" "Wi-Fi" "green:wlan" "phy0tpt" + ;; lenovo,newifi-y1) ucidef_set_led_netdev "wifi" "WIFI" "blue:wifi" "wlan1" ucidef_set_led_netdev "wifi5g" "WIFI5G" "blue:wifi5g" "wlan0" diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 13f9453442..424e370996 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -86,6 +86,7 @@ ramips_setup_interfaces() glinet,gl-mt300n|\ glinet,gl-mt750|\ hiwifi,hc5661|\ + snr,cpe-w4n-mt|\ wrtnode,wrtnode|\ zbtlink,zbt-wa05|\ zyxel,keenetic-omni-ii) @@ -381,6 +382,11 @@ ramips_setup_macs() linksys,e1700) wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; + snr,cpe-w4n-mt) + lan_mac=$(mtd_get_mac_binary Factory 0x28) + wan_mac=$(mtd_get_mac_binary Factory 0x2e) + label_mac=$wan_mac + ;; tplink,archer-c2-v1|\ tplink,archer-c20-v1|\ tplink,archer-c20i|\