ramips: add missing partitions

[openwrt/openwrt.git] / target / linux / ramips / dts / UR-336UN.dts

diff --git a/target/linux/ramips/dts/UR-336UN.dts b/target/linux/ramips/dts/UR-336UN.dts
index 81d0be033f2e7c54bcf60765d306aaab07a9b4a2..09cd28f14a08f3218ba4a32eb00cb1f29b0db6bd 100644 (file)
--- a/target/linux/ramips/dts/UR-336UN.dts
+++ b/target/linux/ramips/dts/UR-336UN.dts
@@ -1,64 +1,70 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
        compatible = "UR-336UN", "ralink,rt3052-soc";
-       model = "UR-336UN Wireless N router";
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
+       model = "UPVEL UR-336UN";
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
-       };
 
-       /* FIXME: no partitions defined */
-/*     ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4004>;
-       };
-*/
-       esw@10110000 {
-               ralink,portmap = <0x2f>;
-       };
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
 
-       /* FIXME: no partitions defined */
-/*     wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
        };
-*/
+
        gpio-leds {
                compatible = "gpio-leds";
+
                3g {
-                       label = "ur336:green:3g";
+                       label = "ur-336un:green:3g";
                        gpios = <&gpio0 9 1>;
                };
+
                gateway {
-                       label = "ur336:green:gateway";
+                       label = "ur-336un:green:gateway";
                        gpios = <&gpio0 11 1>;
                };
+
                ap {
-                       label = "ur336:green:ap";
+                       label = "ur-336un:green:ap";
                        gpios = <&gpio0 12 1>;
                };
+
                wps {
-                       label = "ur336:green:wps";
+                       label = "ur-336un:green:wps";
                        gpios = <&gpio0 14 1>;
                };
+
                station {
-                       label = "ur336:green:station";
+                       label = "ur-336un:green:station";
                        gpios = <&gpio0 13 1>;
                };
        };
@@ -68,19 +74,42 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset_wps {
                        label = "reset_wps";
                        gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       linux,code = <KEY_RESTART>;
                };
+
                mode {
                        label = "mode";
                        gpios = <&gpio0 7 1>;
-                       linux,code = <0x32>;
+                       linux,code = <BTN_0>;
                };
        };
+};
 
-       otg@101c0000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
 };
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4004>;
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
+};