add Ralink V11ST-FE board support

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index cc5600bcfdb96a5941655495540370d7f2a29cc7..a36341ca15b4c0b9239f124158fdd7ca337e1b7e 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -23,7 +23,8 @@ ramips_setup_interfaces()
        argus-atp52b | \
        b2c | \
        nw718 | \
-       w502u)
+       w502u | \
+       wr6202)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ;;
 
@@ -35,18 +36,38 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
                ;;
 
-       f5d8235-v2 | \
-       wl-351)
+       f5d8235-v2)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "rtl8366rb" "1" "1"
-               ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
-               ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
+               ucidef_add_switch_vlan "rtl8366rb" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t"
+               ;;
+
+       rt-n56u)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
+               ucidef_add_switch_vlan "switch0" "2" "4 8t"
+               ;;
+
+       v11st-fe)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "switch0" "2" "0 5t"
                ;;
 
        wcr-150gn)
                ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
                ;;
 
+       wl-351)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "rtl8366rb" "1" "1"
+               ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
+               ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
+               ;;
+
        wli-tx4-ag300n)
                ucidef_set_interface_lan "eth0"
                ;;
@@ -91,7 +112,8 @@ ramips_setup_macs()
                ;;
 
        esr-9753 | \
-       nbg-419n)
+       nbg-419n | \
+       wcr-150gn)
                 lan_mac=$(ramips_get_mac_binary factory 4)
                 wan_mac=$(ramips_get_mac_binary factory 40)
                ;;
@@ -101,14 +123,19 @@ ramips_setup_macs()
                wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
                ;;
 
+       rt-n56u)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(ramips_get_mac_binary factory 32772)
+               ;;
+
        w502u)
                 lan_mac=$(ramips_get_mac_binary factory 40)
                 wan_mac=$(ramips_get_mac_binary factory 46)
                ;;
 
-       wcr-150gn)
-                lan_mac=$(ramips_get_mac_binary factory 4)
-                wan_mac=$(ramips_get_mac_binary factory 40)
+       wl341v3)
+               lan_mac=$(ramips_get_mac_binary board-nvram 65440)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
                ;;
 
        wli-tx4-ag300n)