ramips: add support for easyacc wizard8800
[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / 02_network
index a9914fdb872d77c8e691e3d73fbf07cb7d132ff4..da7600c2c4580242e931e2e909493cacd4bd3ee5 100755 (executable)
@@ -3,6 +3,7 @@
 . /lib/functions.sh
 . /lib/ramips.sh
 . /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
 
 ramips_setup_rt3x5x_vlans()
 {
@@ -41,15 +42,20 @@ ramips_setup_interfaces()
        all0256n | \
        all5002 | \
        all5003 | \
-       awm002-evb | \
        broadway | \
        dcs-930| \
+       ncs601w | \
        wnce2001)
                ucidef_add_switch "switch0" "1" "0"
                ucidef_set_interface_lan "eth0"
                ;;
 
        3g-6200nl | \
+       mlw221)
+                ucidef_set_interface_lan "eth0.2"
+                ;;
+
+       wizard8800 | \
        wl-330n | \
        wmr300)
                ucidef_set_interface_lan "eth0.1"
@@ -65,30 +71,57 @@ ramips_setup_interfaces()
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ;;
 
+       awapn2403)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 6t"
+               ucidef_add_switch_vlan "switch0" "2" "1 6t"
+               ;;
+
+       br-6475nd)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
+               ucidef_add_switch_vlan "switch0" "2" "0 9t"
+               ;;
+
        asl26555)
                ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
                ;;
 
+       cy-swr1100)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 9t"
+               ucidef_add_switch_vlan "switch0" "2" "4 9t"
+               ;;
+
        dir-610-a1 | \
        dir-300-b7 | \
        dir-320-b1 | \
        dir-615-h1 | \
-       mzk-w300nh2)
+       hlk-rm04 | \
+       mzk-w300nh2 | \
+       mzk-750dhp)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
                ucidef_add_switch_vlan "switch0" "2" "4 6t"
                ;;
 
+       awm002-evb | \
+       awm003-evb | \
        argus-atp52b | \
        dir-645 | \
        f5d8235-v1 | \
        f5d8235-v2 | \
        hg255d | \
        rt-n14u | \
-       ur-326n4g)
+       wrtnode | \
+       ur-326n4g | \
+       zbt-wa05)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
@@ -107,6 +140,7 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0 5t"
                ;;
 
+       ar725w | \
        rt-n15 | \
        wl-351)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@@ -137,7 +171,15 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "6t"
                ;;
 
+       wr8305rt)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t"
+               ucidef_add_switch_vlan "switch0" "2" "4 6t"
+               ;;
+
        d105 | \
+       na930 | \
        omni-emb-hpm|\
        wli-tx4-ag300n)
                ucidef_set_interface_lan "eth0"
@@ -161,19 +203,23 @@ ramips_setup_macs()
        local wan_mac=""
 
        case $board in
-       *)
-               wan_mac=$(macaddr_add "$lan_mac" 1)
+       br-6475nd)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               wan_mac=$(mtd_get_mac_binary devdata 7)
                ;;
 
        w306r-v20)
+               lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 5)
                ;;
 
        tew-691gr)
+               lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 3)
                ;;
 
        tew-692gr)
+               lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 4)
                ;;
 
@@ -181,25 +227,41 @@ ramips_setup_macs()
        m4 |\
        x5 |\
        x8)
-               lan_mac=$(macaddr_add "$lan_mac" -1)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               lan_mac=$(macaddr_add "$lan_mac" -2)
                ;;
 
-       dir-620-a1)
+       bc2 |\
+       broadway |\
+       d105 |\
+       dir-620-a1 |\
+       esr-9753 |\
+       freestation5 |\
+       hlk-rm04 | \
+       mpr-a1 | \
+       mpr-a2 | \
+       dir-300-b7 | \
+       dir-320-b1 | \
+       psr-680w |\
+       sl-r7205)
+               lan_mac=$(cat /sys/class/net/eth0/address)
                lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
 
+       cy-swr1100 | \
        dir-645)
                lan_mac=$(mtd_get_mac_ascii nvram lanmac)
                wan_mac=$(mtd_get_mac_ascii nvram wanmac)
                ;;
 
-       nbg-419n | \
        wcr-150gn)
                 wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
 
        rt-n56u)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(mtd_get_mac_binary factory 32772)
                ;;
 
@@ -211,8 +273,8 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
 
-       wl341v3)
-               lan_mac=$(mtd_get_mac_binary board-nvram 65440)
+       *)
+               lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;