ramips: add support for Loewe WMDR-143N

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 3cd7ff60491e4db5f50b1f128e2243f76a816d46..cd9e08a3c2bcec53c890d00434426e42353ee7b8 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -1,7 +1,6 @@
 #!/bin/sh
 
 . /lib/functions.sh
-. /lib/ramips.sh
 . /lib/functions/uci-defaults.sh
 . /lib/functions/system.sh
 
@@ -84,6 +83,7 @@ ramips_setup_interfaces()
        hc5661a|\
        hc5962|\
        hlk-rm04|\
+       k2p|\
        kn|\
        kn_rc|\
        mac1200rv2|\
@@ -157,7 +157,6 @@ ramips_setup_interfaces()
        c20i|\
        c50|\
        dir-645|\
-       dir-860l-b1|\
        f5d8235-v2|\
        gl-mt300a|\
        gl-mt300n|\
@@ -169,6 +168,8 @@ ramips_setup_interfaces()
        mzk-wdpr|\
        rb750gr3|\
        rt-n14u|\
+       tl-wr840n-v4|\
+       tl-wr841n-v13|\
        ubnt-erx|\
        ubnt-erx-sfp|\
        ur-326n4g|\
@@ -181,6 +182,14 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
+       dir-860l-b1)
+               ucidef_add_switch "switch0" \
+                       "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+               ;;
+       gb-pc1)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "4:lan" "6@eth0"
+               ;;
        gl-mt300n-v2)
                ucidef_add_switch "switch0" \
                        "1:lan" "0:wan" "6@eth0"
@@ -221,6 +230,7 @@ ramips_setup_interfaces()
        na930|\
        pbr-d1|\
        wli-tx4-ag300n|\
+       wmdr-143n|\
        wmr-300|\
        wn3000rpv3|\
        wrh-300cr)
@@ -268,6 +278,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
                ;;
+       re350-v1)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "6@eth0"
+               ;;
        re6500)
                ucidef_add_switch "switch0" \
                        "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
@@ -276,6 +290,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
                ;;
+       tew-638apb-v2)
+               ucidef_add_switch "switch0" \
+                       "4:lan" "6@eth0"
+               ;;
        tew-691gr|\
        tew-692gr|\
        wlr-6000)
@@ -328,7 +346,8 @@ ramips_setup_macs()
 
        case $board in
        a5-v11|\
-       ht-tm02)
+       ht-tm02|\
+       wmdr-143n)
                lan_mac=$(cat /sys/class/net/eth0/address)
                ;;
        all0239-3g|\
@@ -375,6 +394,9 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
+       gl-mt300n-v2)
+               wan_mac=$(mtd_get_mac_binary factory 4)
+               ;;
        hc5*61|\
        hc5661a|\
        hc5962)
@@ -485,7 +507,7 @@ ramips_setup_macs()
 }
 
 board_config_update
-board=$(ramips_board_name)
+board=$(board_name)
 ramips_setup_interfaces $board
 ramips_setup_macs $board
 board_config_flush