ramips: add support for Buffalo WCR-1166DS

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e037cbce32b46811fa27c345e6675c3716c7e815..c001dfe85a4dd1ca64fec6cd67d87e3a510bed18 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -58,6 +58,7 @@ ramips_setup_interfaces()
        timecloud|\
        w150m|\
        widora-neo|\
+       wn3000rpv3|\
        wnce2001|\
        zbt-cpe102|\
        zte-q7)
@@ -212,7 +213,7 @@ ramips_setup_interfaces()
                ;;
        kn_rc|\
        kn_rf)
-               ucidef_add_switch "switch" \
+               ucidef_add_switch "switch0" \
                        "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
                ;;
        kng_rc)
@@ -262,6 +263,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
                ;;
+       wcr-1166ds)
+               ucidef_add_switch "switch0" \
+                       "3:lan" "4:wan" "6@eth0"
+               ;;
        wcr-150gn)
                ucidef_add_switch "switch0" \
                        "0:lan" "6t@eth0"
@@ -345,8 +350,10 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       kn_rc|\
+       kn_rf|\
        kng_rc)
-               wan_mac=$(mtd_get_mac_binary factory 28)
+               wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
        linkits7688 | \
        linkits7688d)
@@ -407,6 +414,12 @@ ramips_setup_macs()
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 5)
                ;;
+       wcr-1166ds|\
+       wsr-1166)
+               local index="$(find_mtd_index "board_data")"
+               wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+               lan_mac=$wan_mac
+               ;;
        wcr-150gn)
                wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
@@ -424,11 +437,6 @@ ramips_setup_macs()
        wlr-6000)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
                ;;
-       wsr-1166)
-               local index="$(find_mtd_index "board_data")"
-               wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
-               lan_mac=$wan_mac
-               ;;
        *)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)