ramips: add support for Netgear R6220

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e8d360eca5c1014f1fd25358fbc4039266e5f65e..828f461c4fa8ad2707db45600e267788d11295c7 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -78,7 +78,10 @@ ramips_setup_interfaces()
        dir-320-b1|\
        dir-610-a1|\
        dir-615-h1|\
+       ew1200|\
        firewrt|\
+       hc5661a|\
+       hc5962|\
        hlk-rm04|\
        mac1200rv2|\
        miwifi-mini|\
@@ -92,6 +95,7 @@ ramips_setup_interfaces()
        pbr-m1|\
        psg1208|\
        psg1218|\
+       r6220|\
        sap-g3200u3|\
        sk-wb8|\
        vr500|\
@@ -125,7 +129,6 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
                ;;
        asl26555|\
-       re6500|\
        rp-n53)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
@@ -240,6 +243,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
                ;;
+       re6500)
+               ucidef_add_switch "switch0" \
+                       "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
+               ;;
        rt-n56u)
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
@@ -343,7 +350,9 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
-       hc5*61)
+       hc5*61|\
+       hc5661a|\
+       hc5962)
                lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -386,6 +395,10 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
+       r6220)
+               wan_mac=$(mtd_get_mac_binary factory 4)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
+               ;;
        rt-n56u)
                lan_mac=$(cat /sys/class/net/eth0/address)
                lan_mac=$(macaddr_setbit_la "$lan_mac")