ramips: add support for ZyXEL Keenetic Viva

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 0400e58cdac404668d005e214c0154e3b5dc2e3f..5ae6413fcf87340646965511bd12e069ab1f09b7 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -63,6 +63,7 @@ ramips_setup_interfaces()
                ucidef_set_interface_lan "eth0.2"
                ;;
        3g-6200n|\
+       ac1200pro|\
        ai-br100|\
        db-wrt01|\
        dir-300-b7|\
@@ -85,13 +86,11 @@ ramips_setup_interfaces()
        psg1218|\
        sap-g3200u3|\
        sk-wb8|\
+       vr500|\
        wf-2881|\
-       whr-300hp2|\
-       whr-600d|\
        witi|\
+       wl-wn575a3|\
        wndr3700v5|\
-       wsr-1166|\
-       wsr-600|\
        wt1520|\
        y1|\
        youku-yk1|\
@@ -103,6 +102,13 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       whr-300hp2|\
+       whr-600d|\
+       wsr-1166|\
+       wsr-600)
+               ucidef_add_switch "switch0" \
+                       "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
+               ;;
        ar670w|\
        ar725w|\
        rt-n15|\
@@ -133,6 +139,7 @@ ramips_setup_interfaces()
        jhr-n825r|\
        jhr-n926r|\
        mzk-wdpr|\
+       rb750gr3|\
        rt-n14u|\
        ubnt-erx|\
        ur-326n4g|\
@@ -197,6 +204,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
                ;;
+       kng_rc)
+               ucidef_add_switch "switch1" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
+               ;;
        mlwg2|\
        wizard8800|\
        wl-330n)
@@ -219,7 +230,8 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
                ;;
        tew-691gr|\
-       tew-692gr)
+       tew-692gr|\
+       wlr-6000)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
@@ -312,6 +324,9 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       kng_rc)
+               wan_mac=$(mtd_get_mac_binary factory 28)
+               ;;
        linkits7688 | \
        linkits7688d)
                wan_mac=$(mtd_get_mac_binary factory 4)
@@ -354,6 +369,10 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
                wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
                ;;
+       vr500)
+               lan_mac=$(mtd_get_mac_binary factory 57344)
+               wan_mac=$(mtd_get_mac_binary factory 57350)
+               ;;
        w306r-v20)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 5)
@@ -372,6 +391,9 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory 4)
                wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
+       wlr-6000)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
+               ;;
        wsr-1166)
                local index="$(find_mtd_index "board_data")"
                wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"