mediatek: filogic: add support for Xiaomi AX3000T
[openwrt/openwrt.git] / target / linux / mediatek / dts / mt7981b-xiaomi-mi-router-wr30u.dtsi
index 1e738a4474dc67c590b4239f6fa705e7aea30164..87a2493a2383b4244403543a895deaea47e4eeb8 100644 (file)
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
 /dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7981b-xiaomi-mi-router-common.dtsi"
 
-#include "mt7981.dtsi"
-
-/ {
-       aliases {
-               serial0 = &uart0;
-               led-boot = &led_system_yellow;
-               led-failsafe = &led_system_yellow;
-               led-running = &led_system_blue;
-               led-upgrade = &led_system_yellow;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       memory {
-               reg = <0 0x40000000 0 0x10000000>;
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               mesh {
-                       label = "mesh";
-                       gpios = <&pio 0 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_9>;
-                       linux,input-type = <EV_SW>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_system_blue: system_blue {
-                       label = "blue:system";
-                       gpios = <&pio 9 GPIO_ACTIVE_LOW>;
-               };
-
-               led_system_yellow: system_yellow {
-                       label = "yellow:system";
-                       gpios = <&pio 10 GPIO_ACTIVE_LOW>;
-               };
-
-               led_network_blue {
-                       label = "blue:network";
-                       gpios = <&pio 11 GPIO_ACTIVE_LOW>;
-               };
-
-               led_network_yellow {
-                       label = "yellow:network";
-                       gpios = <&pio 12 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&eth {
-       status = "okay";
-
-       gmac0: mac@0 {
-               compatible = "mediatek,eth-mac";
-               reg = <0>;
-               phy-mode = "2500base-x";
-
-               nvmem-cells = <&macaddr_factory_4 (-1)>;
-               nvmem-cell-names = "mac-address";
-
-               fixed-link {
-                       speed = <2500>;
-                       full-duplex;
-                       pause;
-               };
-       };
+&gmac0 {
+       nvmem-cell-names = "mac-address";
+       nvmem-cells = <&macaddr_factory_4 (-1)>;
 };
 
-&mdio_bus {
-       switch: switch@1f {
-               compatible = "mediatek,mt7531";
-               reg = <31>;
-               reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
-               interrupt-controller;
-               #interrupt-cells = <1>;
-               interrupt-parent = <&pio>;
-               interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+&leds {
+       led-wan-blue {
+               color = <LED_COLOR_ID_BLUE>;
+               function = LED_FUNCTION_WAN;
+               gpios = <&pio 11 GPIO_ACTIVE_LOW>;
        };
-};
-
-&switch {
-       ports {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               port@0 {
-                       reg = <0>;
-                       label = "wan";
-               };
-
-               port@1 {
-                       reg = <1>;
-                       label = "lan2";
-               };
-
-               port@2 {
-                       reg = <2>;
-                       label = "lan3";
-               };
-
-               port@3 {
-                       reg = <3>;
-                       label = "lan4";
-               };
-
-               port@6 {
-                       reg = <6>;
-                       ethernet = <&gmac0>;
-                       phy-mode = "2500base-x";
 
-                       fixed-link {
-                               speed = <2500>;
-                               full-duplex;
-                               pause;
-                       };
-               };
+       led-wan-yellow {
+               color = <LED_COLOR_ID_YELLOW>;
+               function = LED_FUNCTION_WAN;
+               gpios = <&pio 12 GPIO_ACTIVE_LOW>;
        };
 };
-
-&spi0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&spi0_flash_pins>;
-       status = "okay";
-
-       spi_nand: flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "spi-nand";
-               reg = <0>;
-
-               spi-max-frequency = <52000000>;
-               spi-tx-bus-width = <4>;
-               spi-rx-bus-width = <4>;
-
-               partitions: partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "BL2";
-                               reg = <0x00 0x100000>;
-                               read-only;
-                       };
-
-                       partition@100000 {
-                               label = "Nvram";
-                               reg = <0x100000 0x40000>;
-                       };
-
-                       partition@140000 {
-                               label = "Bdata";
-                               reg = <0x140000 0x40000>;
-                       };
-
-                       factory: partition@180000 {
-                               label = "Factory";
-                               reg = <0x180000 0x200000>;
-                               read-only;
-
-                               nvmem-layout {
-                                       compatible = "fixed-layout";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       macaddr_factory_4: macaddr@4 {
-                                               compatible = "mac-base";
-                                               reg = <0x4 0x6>;
-                                               #nvmem-cell-cells = <1>;
-                                       };
-                               };
-                       };
-
-                       partition@380000 {
-                               label = "FIP";
-                               reg = <0x380000 0x200000>;
-                               read-only;
-                       };
-
-                       partition@580000 {
-                               label = "crash";
-                               reg = <0x580000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@5c0000 {
-                               label = "crash_log";
-                               reg = <0x5c0000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@7600000 {
-                               label = "KF";
-                               reg = <0x7600000 0x40000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pio {
-       spi0_flash_pins: spi0-pins {
-               mux {
-                       function = "spi";
-                       groups = "spi0", "spi0_wp_hold";
-               };
-
-               conf-pu {
-                       pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-               };
-
-               conf-pd {
-                       pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-               };
-       };
-};
-
-&wifi {
-       status = "okay";
-
-       mediatek,mtd-eeprom = <&factory 0x0>;
-};
-
-&uart0 {
-       status = "okay";
-};
-
-&watchdog {
-       status = "okay";
-};